Back to news

May 25, 2020 | Local, Land

Supacat and Soucy team to offer composite rubber tracks for UK armoured fleet upgrades

21 May 2020, Leading high mobility military vehicle developer, Supacat, with operations in Devon, UK, and Melbourne, Australia, signed a Teaming Agreement in March 2020 with Soucy International Inc., the Quebec, Canada, based global leader in Composite Rubber Tracks (CRT) for defence equipment.

The teaming offers Soucy's market leading, high performance Composite Rubber Track systems to meet the requirements of the UK armed forces, and others, to upgrade their new and legacy armoured fleets from Steel Track to Composite Rubber Tracks.

The integration and support for Soucy tracks could be provided by Supacat, an established prime contractor to both the UK and Australian MoDs, thus securing high value jobs within local supply chains. Supacat's OEM engineering capability and experienced field support teams would ensure the long-term sustainment of vehicles fitted with Composite Rubber Tracks and a commitment to support troops in peacetime and during operations.

Soucy has been in the vanguard of Composite Rubber Track development to not only match but surpass the performance of steel track systems in all measurable areas, from mobility and traction to cost per Km. Soucy provides defence tracks up to a GVW of 50mT and continues developing compounds for higher GVW. Soucy tracks are approved by military forces worldwide and it has supplied Composite Rubber Tracks for platforms such as M113, Warthog, Bronco, BVS10, BAE Systems MPF, CV90 and Redback, with many more in development.

The value of the UK armed forces' requirement is estimated at £500m in track sales over 25 years but deliver potential savings to the UK MoD of £330m from just four platform configurations transitioned to Composite Rubber Tracks, based on current track mileage allocations.

For the UK MoD, the Soucy – Supacat teaming enables it to acquire global market leading technology through an innovation led British SME and level up employment into South West England; and post Brexit, to further the UK – Canada trade partnership in helping Soucy expand its presence in the UK to create new job opportunities. Other armed forces in Europe are planning upgrades but acceptance onto some of the British Army's larger fleet is key to the UK-Canada team.

Composite Rubber Tracks reduce the noise and vibration levels generated by steel that impact the health of both vehicle system and user. They significantly improve crew safety, durability and system life while lowering fuel and life cycle costs. Rubber tracks also benefit programmes with weight restrictions, such as the Mobile Fires Platform (MFP).

Nick Ames, CEO of Supacat parent SC Group said, "We are delighted to be teamed with the world leading rubber track manufacturer, Soucy. We have had experience with tracks over the years for both military and civil applications, most notably the RNLI Launch and Recovery System. This teaming takes our exposure to rubber tracks to a new level and we look forward to working with Soucy on bringing the undeniable benefits of rubber tracks to the relevant UK and Australian vehicle fleets in the coming months and years ensuring the economic benefits are retained in both countries”.

Normand Lalonde said, ‘' This teaming agreement between Soucy and Supacat is directly linked to the global positioning strategy of Soucy. It will allow us to enhance our value proposition offer of CRT to the UK MOD and to the different European and Australian armies while supporting local employment. It will allow the Armies to capitalize greatly on the benefits brought by the CRT helping them to increase their operational capabilities. Soucy is very honored to work with Supacat, both companies have the same values.''

https://www.armyrecognition.com/may_2020_news_defense_global_security_army_industry/supacat_and_soucy_team_to_offer_composite_rubber_tracks_for_uk_armoured_fleet_upgrades.html

On the same subject

  • Canada’s Secret Cold War Submarine Drone Is Still Relevant Today

    July 14, 2020 | Local, Aerospace

    Canada’s Secret Cold War Submarine Drone Is Still Relevant Today

    Extra-large autonomous submarines may revolutionize intelligence gathering and espionage under the sea. One of these ground breaking projects is the U.S. Navy's Boeing Orca extra-large uncrewed underwater vehicle (XLUUV). It is much larger than any other underwater drone currently in the water. But there is a historical precursor that, despite its epic Cold War story, is not widely known. And its mission, to lay covert sensor networks in the arctic, may be as relevant today as it was then. During the Cold War, NATO believed that Russian submarines were using the ice cap in the Canadian Arctic as cover to covertly move between the Atlantic and Pacific. So the U.S. and Canada placed a special sonar network there, deep under the ice. Canadian engineers had to build the world's largest autonomous underwater vehicle (AUV), Theseus, to lay a cable where ships could not reach. The project started in the 1980s, at a time when Russian submarines were getting much quieter. To listen for them, a joint U.S. and Canadian sonar array was to be placed several hundred miles north of the remote Canadian base at CFS Alert. The array was codenamed Spinnaker, in honor of the bar where scientists made many of the unclassified decisions in the project. This was similar to the now-famous SOSUS (Sound Surveillance System), but used classified technology to match its operational circumstances. In fact it must have been much more advanced than the original SOSUS. Connecting the sonar array to the base would require laying a fiber-optic cable for hundreds of miles under permanent ice cap. The solution was to build the world's largest autonomous underwater vehicle. The uncrewed submarine would swim from an ice hole nearer to the base all the way to the Spinnaker array. As it went the cable would unreel out of the back. Thus ‘Theseus' got its name from the mythical hero of Ancient Greece who trailed thread behind him when he ventured into the labyrinth to fight the Minotaur. When we think of advanced Canadian military projects which were ahead of their time, the Avro Canada CF-105 Arrow springs to mind. That delta-winged Mach-2 fighter flew in the 1950s and was cutting edge technology at the time, one of the all-time great aircraft. But it was cancelled abruptly in 1959 before it could enter service. The Theseus AUV is up there with the Avro Arrow, but less well recognized. And unlike the Arrow, it was used operationally, in one of the boldest projects started during the Cold War. The project had many secret aspects. Years later much of what we know about the project comes from Bruce Butler, one of the core team involved. Bulter has written a book, Into the Labyrinth (on Amazon), and recently talked to the Underwater Technology Podcast about the project. Theseus was 35 feet long and about 4 feet across. In AUV terms this is large, even today. In modern naval terminology it would be categorized as a large-displacement uncrewed underwater vehicle (LDUUV). The Spinnaker sonar system was placed on the sea floor right on the edge of the arctic shelf. It was about 84 degrees north, up in the top right-hand corner of Canada, near to Greenland. Such an advanced project took years to realize, so it was not until spring 1996 when Theseus could go to work laying the cable. The whole operation was pushing the boundaries of uncrewed underwater vehicles at the time. Despite some close calls along the way, Theseus was able to navigate to the Spinnaker, letting out the vital thread as it went. Many details of the project and technology involved are still classified. And we may never know whether Spinnaker ever picked up any Russian submarines. By the time it had been laid the Russian Navy was in steep decline following the end of the Cold War. But with a resurgent Russian Navy today, the relevance of systems like Spinnaker may be greater than ever. And one of the roles which large submarine drones like the Orca might do is lay cables on the sea floor, unseen from above. Historical precedents like Theseaus can help us understand the way that these might be employed, and the challenges that they will face. https://www.forbes.com/sites/hisutton/2020/07/12/canada-secret-cold-war-drone-submarine-is-still-relevant-today/#121a2da51e96

  • DND Selects Seven Engineering and Costing Proposals for Space-Based Surveillance System

    February 7, 2020 | Local, Aerospace, C4ISR

    DND Selects Seven Engineering and Costing Proposals for Space-Based Surveillance System

    In December of 2019 the Department of National Defence (DND) put a call for engineering and costing studies related to a space-based surveillance system. Today DND published the companies selected to continue the process for the three streams. The three space-based surveillance system streams are: Stream 1 – Constellation Design concept. Stream 2 – Data Exploitation concept. Stream 3 -Alternate mission type design concept (non-SAR). Up to nine proposals would be selected. Seven were announced today. The companies were notified that they had been selected in late January. They have until March 31, 2020 to complete their work. No value was published for the contracts. Stream 1 – Constellation Design Concept Scope: DG Space requires a detailed engineering and costing analysis to be conducted on a space-based surveillance system constellation design concept that best meet its requirements, as described in its SBS-RD (Space-Based Surveillance Requirements document). Follow-on analysis may also be required. The companies selected for Stream 1 are; MDA Systems Ltd. UrtheCast Corp. Stream 2 – Data Exploitation Concept Scope: DG Space requires a detailed engineering and costing analysis to be conducted on a space-based surveillance system data exploitation design concept that best meet its requirements, as described in its SBS-RD (Space-Based Surveillance Requirements document). Additional analysis may also be required. The companies selected for Stream 2 are; MDA Systems Ltd. Airbus Defence and Space GmbH UrtheCast Corp. Stream 3 – Alternate Mission Concept Scope: DG Space requires a detailed engineering and costing analysis to be conducted on a space-based surveillance system alternate mission type (non-SAR) design concept that best meet its requirements, as described in its SBS- RD (Space-Based Surveillance Requirements document). Additional analysis may also be required. The companies selected for Stream 3 are; MDA Systems Ltd. Satconsult https://spaceq.ca/dnd-selects-seven-engineering-and-costing-proposals-for-space-based-surveillance-system

  • Move of Canadian Forces aerospace testing organization to Ottawa delayed by construction problems, other issues

    September 7, 2023 | Local, Security

    Move of Canadian Forces aerospace testing organization to Ottawa delayed by construction problems, other issues

    Fifty-four Aerospace Engineering Test Establishment members are in temporary space now, and the move from Alberta won't finish until 2026.

All news