Back to news

October 25, 2022 | International, Aerospace

Rafael, Hensoldt to fuse electronic-warfare kit on German Typhoon jets

Rafael and Hensoldt have teamed up for souped-up electronic warfare jams on Luftwaffe Typhoon jets.

https://www.c4isrnet.com/global/europe/2022/10/24/rafael-hensoldt-to-fuse-electronic-warfare-kit-on-german-typhoon-jets/

On the same subject

  • Boeing rolls out Australia’s first ‘Loyal Wingman’ combat drone

    May 6, 2020 | International, Aerospace

    Boeing rolls out Australia’s first ‘Loyal Wingman’ combat drone

    By: Valerie Insinna WASHINGTON — Boeing is set to roll out the first “Loyal Wingman” drone for the Royal Australian Air Force during a Tuesday morning ceremony, putting the RAAF high on the list of countries experimenting with autonomous aircraft. “This a truly historic moment for our country and for Australian defense innovation,” said Australian Prime Minister Scott Morrison. “The Loyal Wingman will be pivotal to exploring the critical capabilities our Air Force needs to protect our nation and its allies into the future.” The RAAF plans to buy three drones, which Boeing calls the Airpower Teaming System, as part of the Loyal Wingman Advanced Development Program. Over a series of flight tests and demonstrations, the RAAF hopes to figure out how to best integrate drones with fighter jets and other combat aircraft, allowing the air force to keep pilots safe by putting lower cost unmanned assets at risk during a fight. “Autonomy is a big element of this, as well as the incorporation of artificial intelligence. Those two elements combined enable us to support existing forces,” said Jerad Hayes, Boeing's senior director for autonomous aviation and technology. The ATS is semi-autonomous, meaning that fighter pilots will not have to remotely control the maneuvers of the drone, said Shane Arnott, Boeing's ATS program director. “When you are teaming, say with a Super Hornet, they don't have the luxury during combat maneuvers or operations to be remotely piloting another aircraft while doing their own,” he said. But one of the biggest technical questions still remains: How much data should be transferred from the ATS to the cockpit of the manned aircraft controlling it, and when does that turn into information overload? That question is one Boeing wants to answer more definitively once ATS makes its first flight later this year and moves into its experimentation phase, Arnott said. “There's a lot for us to figure out [on] what's that right level of information feed and direction. One of the great benefits of working with the Royal Australian Air Force is having the real operators [give feedback],” he said. “We don't have all the answers yet. We have a lot of understanding through our surrogate simulator and surrogate testing that we're doing, but we will prove that out.” Boeing first introduced the Airpower Teaming System at the Australian International Airshow at Avalon in February 2019, when the company unveiled a full-scale model. Since then, the company has moved quickly to fabricate the first of three aircraft, completing the fuselage structure this February. In April, the aircraft stood on its own wheels for the first time and powered on. The ATS air vehicle is 38 feet long, with a removable nose that can be packed with mission-specific sensors and other payloads. Throughout the design process, Boeing simulated a “digital twin” of the aircraft that allowed it to virtualize the operation of the aircraft, as well as how it would be produced and maintained. It also saved money by incorporating resin-infused composite structures, including one that is the largest piece Boeing has ever manufactured using that technique, Hayes said. That large structure snaps into another to form the plane's wings, cutting down on the manpower needed to fabricate the aircraft. While the drone's sleek, twin-tailed design is simple, with only four moving surfaces, it was carefully composed to optimize the aircraft's survivability, maneuverability and cost, Arnott said. While Arnott wouldn't talk about the stealth features of the aircraft, he noted that “there was a lot of thought put into getting that right balance of ‘good enough' across the board, and [radar] signature is obviously an aspect, and affordability is a big one.” Boeing officials have also declined to comment on the price of the aircraft, but Arnott and Hayes made it clear that Boeing intends to keep it cost-competitive with its main competitor, Kratos Defense and Security's XQ-58 Valkyrie. The U.S. Air Force has expressed interest in procuring Valkyrie for the loyal wingman role and to host communications relay payloads that would allow the F-35 and F-22 to share data stealthily. Boeing is also engaged with the U.S. military about potential uses of the ATS, Hayes asid. “We see the Airpower Teaming System platform as capable of going against many different mission sets, and as such, we're engaging across the Department of Defense to understand their specific mission need, what their requirements are for those, and understanding exactly how the Airpower Teaming System fits those,” he said. The nose — which is 8.5 feet long with more than 90k cubic inches volume — is key to the company's strategy to sell the system outside of Australia, Arnott said. Boeing envisions working with international customers to create customized modular payloads that could be built with the help of indigenous suppliers, thus increasing its appeal. “The industrial aspect of this is of a lot of interest for a number of countries,” said Arnott. “Being able to do meaningful work on the systems to the extent of creating whole new payloads or role capability is of great interest.” https://www.defensenews.com/air/2020/05/04/boeing-rolls-out-australias-first-loyal-wingman-combat-drone/

  • Dassault Aviation achève le déploiement de 3DExperience

    July 26, 2019 | International, Aerospace

    Dassault Aviation achève le déploiement de 3DExperience

    Par Léo Barnier Le groupe Dassault Aviation vient de passer une étape importante dans son processus de transformation numérique, en coopération avec Dassault Systèmes. L'avionneur français vient d'achever au mois de juillet le déploiement de la plateforme 3DExperience, développée par sa société « cousine », pour l'ensemble de ses programmes civils et militaires. C'est notamment le cas pour le futur Falcon qui doit être lancé prochainement. Toutes les équipes de Dassault Aviation vont ainsi évouler sous un même environnement numérique. Il s'agit ainsi de créer une continuité qui s'appliquera depuis la conception des nouveaux programmes jusqu'aux services de soutien après-vente. Chacun pourra ainsi travailler sur une maquette numérique unique, qui intègre les demandes spécifiques de chacun, avec des outils compatibles entre eux. Cela doit permettre par exemple au bureau d'études de prendre plus largement en compte les contraintes de l'ensemble du cycle de vie d'un produit ou d'un programme (production opérations, maintenance, rétrofit...) dès les premières esquisses, afin d'optimiser celui-ci dans la durée. A la clef, des gains de temps et de coûts pour le cycle de développement d'un avion - le nouveau Falcon notamment - comme pour la suite de sa vie opérationnelle. Comme l'explique David Ziegler, vice-président Industrie aéronautique et défense de Dassault Systèmes : « La plateforme 3DExperience représente une approche holistique de l'innovation. Elle permet à Dassault Aviation d'accéder à des technologies et à des capacités intégrées et de relier tous les points, du concept aux opérations... » Les différents services du constructeur disposeront d'outils entièrement intégrés dans cette plateforme unique, mais adaptés à leurs besoins spécifiques. Dassault Systèmes mentionne ainsi six solutions industrielles choisies par Dassault Aviation : Winning Concept, Program Excellence, Co-Design to Target, Ready for Rate, Build to Operate et Keep Them Operating. Dassault Aviation entend aussi déployer cette continuité vers sa chaîne d'approvisionnement avec trente sociétés identifiées, comme l'explique Jean Sass, directeur général Systèmes d'information de Dassault Aviation : « Tous nos partenaires industriels travailleront en collaboration avec leurs clients sur une seule et même plateforme numérique. À terme, nous serons en mesure de proposer à nos clients de nouvelles expériences de vol à la pointe de l'innovation. » Cette démarche de transformation numérique à l'aide de 3DExpérience a été entamée l'an dernier, en mai exactement. Dassault Aviation et Dassault Systèmes avaient alors signé un contrat pluriannuel pour remplacer l'ensemble des solutions de gestion du cycle de vie des produits (PLM) de l'avionneur. https://www.journal-aviation.com/actualites/42877-dassault-aviation-acheve-le-deploiement-de-3dexperience

  • Contracts for March 2, 2021

    March 3, 2021 | International, Aerospace, Naval, Land, C4ISR, Security

    Contracts for March 2, 2021

    Today

All news