Back to news

February 6, 2018 | Local, C4ISR

L3 WESCAM launches smarter imaging and processing technologies

SINGAPORE, February 6, 2018 – L3 WESCAM announced today that it has created smarter, more technologically advanced electro-optical and infrared (EO/IR) systems by incorporating highperforming imaging and processing technologies into its MX™-Series product line. These new technologies will enable MX operators to conduct missions with enhanced image processing and greater visual capabilities than ever before.

“Today's environments are more complex, and missions need to be executed with more assurance,” said Paul Jennison, Senior Vice President of Strategy and Business Development for L3 WESCAM. “L3's newly incorporated smart technologies provide a portfolio of capabilities that will help operators succeed though a combination of ease-of-use and robust performance.”

Newly launched imaging technologies include the addition of higher-sensitivity cameras that offer advanced imaging capabilities across a much wider range of illumination conditions, thereby advancing operator capabilities in low-visibility and no-visibility environments.

Advancements to L3's MX image processing technologies include WESCAM's embedded Advanced Video Engine (WAVE) and a newly embedded Graphics Processing Unit (GPU). L3 WESCAM's new Automated Video Tracker (AVT) and embedded Moving Target Indicator (MTI) technologies are supported by this new architecture and provide automatic target acquisition of multiple targets with significantly improved target lock performance in challenging mission scenarios.

L3's significant investment in its image processing technologies has made the MX product line smarter, as the WAVE's architecture supports future growth and allows for the rapid deployment of future image processing techniques.

L3 has more than 40 years of experience in the design and delivery of stabilized imaging and targeting solutions. Systems range in size from 8 to 25 inches in diameter, portray clear sighting capabilities across the visible and infrared spectrums, and operate with outstanding stabilization and leading range performance.

https://www.wescam.com/wp-content/uploads/L3-WESCAM_Launches_Smarter_More_Accurate_Imaging_Processing_Technologies.pdf

On the same subject

  • Canada: Defence Procurement Canada: Is It ‘Back To The Future' For Defence Procurement?

    January 6, 2020 | Local, Aerospace, Naval, Land, C4ISR, Security

    Canada: Defence Procurement Canada: Is It ‘Back To The Future' For Defence Procurement?

    Article by Marcia Mills and Paul Burbank Capital Perspectives Last Updated: January 3 2020 The issues surrounding defence acquisition took a backseat in the run up to the 2019 federal election. As noted by the Canadian Global Affairs Institute, this occurred despite the fact that two of the largest defence procurements in Canadian history – the Canadian Surface Combatants (warships) project and the Future Fighter Capability Program (fighter jets) – are in active procurement mode, spending is falling short of forecast and roughly 70 per cent of the approved projects under the 2017 implementation of the Strong, Secure, Engaged Defence Policy have seen schedule delays 1. Canadian defence procurement is a many-layered affair. Spread across three departments and a central agency (the Department of National Defence; Public Procurement and Services Canada; Innovation, Science and Economic Development; and Treasury Board, respectively), the need to coordinate and align this much bureaucracy is often viewed as one of the significant problems in defence procurement. The two main political parties offered very different solutions to these issues during the election, but provided few details. The Platforms The Conservatives focused on the need to "de-politicize" the procurement process, which would in turn deliver greater value for money and better resources for the Canadian military. To accomplish this, new oversight mechanisms, both in Cabinet and in the Privy Council Office, would be created. 2 Major defence procurements are already subject to oversight by the Defence Procurement Secretariat, a Deputy Ministers Governance Committee and a Ministers Working Group. It is not entirely clear how additional layers of oversight would reduce delay and improve efficiencies, unless the new mechanisms replaced all or some of the current oversight layers. The Liberal platform included a portion on defence procurement that pointed to the creation of "Defence Procurement Canada," to ensure defence projects were delivered on time and with greater transparency. The structure of Defence Procurement Canada was not explained. A bit of speculation is now in order as to what this could mean for defence procurement. The New Cabinet The Liberals formed a minority government and announced their new Cabinet on Nov. 20. While the Ministers of Defence (Harjit Sajjan) and Innovation, Science and Economic Development (Navdeep Bains) remain the same, Treasury Board has a new President and Public Services and Procurement Canada (PSPC) has a new Minister – Jean-Yves Duclos and Anita Anand, respectively. Treasury Board President Duclos moves from a smaller, specific portfolio within Employment and Social Development Canada to now preside over one of the federal government's most powerful central agencies and cabinet committees. He will have a considerable role in ensuring effective financial management and government spending. Minister Anand is a new face in Cabinet and a first-time Member of Parliament for the riding of Oakville, Ont. She is assuming responsibility for, amongst other things, the two single largest purchasing organizations in the federal government (PSPC and Shared Services Canada (SSC)). Going Forward Defence procurement in Canada follows a general ebb and flow – resources are increased during times of conflict and are reduced in times of peace. Restructuring occurs in response to these influences, as well as perceived redundancies, desired efficiencies and the odd scandal or two. Various Minsters and departments have been responsible for defence procurement and production over the past 100 years, including boards or commissions set up during times of war. A new independent department for defence procurement would result in three different departments (SSC, PSPC and the Defence Procurement Canada) managing the vast majority of federal acquisition. This approach would be similar to the stand up of the Department of Defence Production in the '50s. The DDP had a short life. Established in 1951, it was expanded to become the central purchasing organization in 1963 as an interim measure, then disbanded in 1969 with the establishment of the Department of Supply and Services. The amalgamations of various entities continued until 1993, with the creation of the Department of Public Works and Government Services (a.k.a. PSPC). PSPC operates as a central purchasing agent for the government, with exclusive authority under the Defence Production Act to acquire defence supplies for DND. If Defence Procurement Canada is to exist as a departmental corporation or agency, the government would want to launch this new entity early in its mandate so that it can lay claim to any degree of efficiency or success achieved. If so, the new entity would likely remain within PSPC, as the Minister has existing statutory authority to create a supporting departmental corporation or agency under the Defence Production Act. Creating this entity outside of PSPC's current authority would require a significant reorganization of the public service and change to the operations of government of a magnitude greater than that required to establish Shared Services Canada – this would include deciding whether to maintain or decentralize the functions of defence procurement and defence production, as well as significant statutory amendments to provide or reduce, as required, the authority of all Ministers involved. Ministerial mandate letters, which were released in mid-December, shed no additional light on the specific operational structure or corporate identity that Defence Procurement Canada is expected to take. Notable in these letters, however, is a prevailing theme: Minister Anand has the clear responsibility for bringing forward options to Cabinet, but that effort will be supported by a host of respected, senior ministers, including Minister Sajjan (National Defence), Minister Jordan (Fisheries & Oceans and the Canadian Coast Guard), and Minister Bains (Innovation, Science and Industry). As all of these Ministries are already involved in defence procurement, their continued support is not surprising. Throughout the history of defence acquisition and production in Canada, large-scale reorganization has been predicated by one of three events: war, post-war reconstruction or scandal. Absent one of these triggers, a minority government may have little appetite (or be able to drum up support from any other party) to stand up a wholly new department, or even a departmental corporation or agency within PSPC itself, on the basis of efficiency and economy alone, particularly in light of the on-going Phoenix debacle and the continued issues at Shared Services Canada. As no new Minister for Defence Procurement Canada was named in the new Cabinet nor were any Additional Ministers within PSPC named for defence or Defence Procurement Canada, it appears that, at least for now, any defence acquisition reorganization is likely to remain on the backburner. Marcia Mills is procurement counsel with the Fasken Ottawa office and has 20+ years of private and public sector experience. She provides clients with legal and strategic advice for all aspects of government procurement, as well as advice on government policies and procurement processes. Paul Burbank is an associate with the Fasken Ottawa office. He works with the Communications Law group to provide advice on telecommunications and broadcasting in Canada. Paul also works with Fasken's Government Relations and Political Law group on strategy and compliance matters. Footnotes 1 The Defence Procurement Outlook for Canada's 43rd Parliament by David Perry, The Global Exchange, 2019 Volume XVII, Issue III; Canadian Global Affairs Institute 2 Global News: With billions at risk, federal parties promise to fix defence, procurement

  • IDEaS Innovator Update

    October 26, 2022 | Local, Aerospace, Naval, Land, C4ISR, Security, Other Defence

    IDEaS Innovator Update

    Better science and technology solutions for a safer future – New challenges launched by the Canadian Safety and Security Program The Canadian Safety and Security Program (CSSP) has recently launched eight new challenges under the theme of Building robust safety and security capabilities through science and technology (S&T). These challenges aim to help address Canada's existing and emerging threats and risks in areas such as: Improving community resilience and responder capabilities Looking for better ways to verify and manage the identities of individuals Improving border security Enhancing chemical, biological, radiological, nuclear and explosives (CBRNE) capabilities and responses Countering the threat posed by uncrewed aerial systems (UAS) Submit your application by December 16, 2022. Apply now! Competitive Projects to launch new and exciting challenges through its next Call for Proposals! The Innovation for Defence Excellence and Security (IDEaS) program will be launching four new challenges under its Competitive Projects element soon. These new challenges cover a wide scope of Department of National Defence and Canadian Armed Forces (DND/CAF) needs including the Arctic domain, cognitive radio communications, human autonomy teaming, and just-in-time resupply of common medical equipment and devices in austere environments. Check back soon for more information including details on how to apply! Get ready for a robot showdown! The IDEaS program has selected five innovative finalists to demonstrate their advanced robotic platforms and methods of control for a chance to win cash prizes to further develop their technology! Stay tuned to find out more about this upcoming event and visit the Robot Round-up challenge page for more information on this contest.

  • Airbus Delivers on Industrial and Technological Benefits for Fixed Wing Search & Rescue aircraft (FWSAR) Program with UTAS Landing Gear on A350-1000

    June 29, 2018 | Local, Aerospace

    Airbus Delivers on Industrial and Technological Benefits for Fixed Wing Search & Rescue aircraft (FWSAR) Program with UTAS Landing Gear on A350-1000

    OTTAWA, June 28, 2018 /CNW/ - UTC Aerospace Systems (UTAS) Landing Systems site in Oakville, Ontario, is Airbus' sole supplier for the main landing gear of the A350-1000, the world's newest long range widebody airliner. With 168 A350-1000s ordered by airlines around the world, the cooperation is expected to bring long-term, sustainable and high-quality work to Canada, this also resulting through the Industrial and Technological Benefits (ITB) associated with the Airbus C295 FWSAR program. The program looks to provide business even beyond the duration of the current FWSAR ITB achievement period. "I am pleased to see that UTC Aerospace Systems' expertise is being recognized through this important contract with government suppliers. Our government is leveraging its purchasing power to bring economic benefits and jobs to Canadian firms, enabling them to grow and innovate, which is creating highly-skilled jobs and economic growth in Oakville and across the country," said the Honourable Navdeep Bains, Minister of Innovation, Science and Economic Development (ISED). UTC Aerospace Systems celebrated an important milestone earlier this year with the entry into service of its first Airbus A350-1000 landing gear, flying today with two operators. "At UTC Aerospace Systems, our Landing Systems business has a long history of operating in Canada and partnering with Airbus," said the company's Oakville Vice President Frank Karakas. "We're proud of that legacy, and look forward to building on it in the years to come." The manufacturing of the landing gear also incorporates a sizeable element of Canadian Small Medium Business (SMB) volumes, thus benefitting the local supply chain. The project also supports numerous ISED goals, such as world product mandates, export enhancement, sustainable business and SMB involvement. "Airbus and UTAS have been partners for many years and this new technology incorporated into the A350-1000 widebody airliner is just another example of how we continue to support Canadian innovation," said Simon Jacques, President, Airbus Defence and Space Canada. The A350-1000 is the latest member of Airbus' leading widebody family, showing high level of commonality with the A350-900 with 95% common systems part numbers and Same Type Rating. As well as having a longer fuselage to accommodate 40% larger premium area (compared to the A350-900), the A350-1000 also features a modified wing trailing-edge, new six-wheel main landing gears and more powerful Rolls-Royce Trent XWB-97 engines. Along with the A350-900, the A350-1000 is shaping the future of air travel by offering unprecedented levels of efficiency and unrivalled comfort in its 'Airspace' cabin. With its additional capacity the A350-1000 is perfectly tailored for some of the busiest long-haul routes. The FWSAR programme is supporting approximately $2.5 billion (CAD) in ITB value return to Canada, through high-volume, long-term partnerships with companies, such as UTC Aerospace Systems. About Airbus Airbus is a global leader in aeronautics, space and related services. In 2017 it generated revenues of € 59 billion restated for IFRS 15 and employed a workforce of around 129,000. Airbus offers the most comprehensive range of passenger airliners from 100 to more than 600 seats. Airbus is also a European leader providing tanker, combat, transport and mission aircraft, as well as one of the world's leading space companies. In helicopters, Airbus provides the most efficient civil and military rotorcraft solutions worldwide. https://www.newswire.ca/news-releases/airbus-delivers-on-industrial-and-technological-benefits-for-fixed-wing-search--rescue-aircraft-fwsar-program-with-utas-landing-gear-on-a350-1000-686854821.html

All news