Avionics upgrade slated for iconic aerial firefighters

On the same subject

• 

  January 30, 2019 | International, Aerospace

  Iwakuni Marines use 3D printers to revolutionize maintenance for fighter jets

  By JAMES BOLINGER | STARS AND STRIPES MARINE CORPS AIR STATION IWAKUNI, Japan — Using 3D printers, Marines based in southern Japan created two products that reduce the time it takes to repair F/A-18 Hornets and may save the Defense Department money. Called an engine ship kit, the first innovation is a set of plastic clips and plugs to prevent oil and hydraulic fluid leaking from aircraft engines removed for repairs. The other is a tool that helps maintainers grease the bearings on the F/A-18's high-speed Gatling gun. Designed by Marines from MCAS Iwakuni's Marine Aviation Logistics Squadron 12, the engine ship kit will have an immediate impact on operations, squadron commander Lt. Col. Javier Garcia recently told Stars and Stripes. The kit eliminates the need for maintainers to travel to austere locations to drain oil and hydraulic fluids so an engine can be taken safely back to Iwakuni for repair. The plastic drain plugs prevent the fluid from leaking and the clips ensure the plugs are not dislodged as the engine is readied for transport. The kit is the brain child of 1st Lt. Simon Miller and Chief Warrant Officer 3 Mark Willems, who needed to get a broken F/A-18 engine from Wake Island to MCAS Iwakuni late last year. The engine began to leak while a C-130 crew tried to load it, Garcia said. In the past, a team of maintenance Marines would have traveled to the location to prepare the engine for safe transport, but that takes away from their mission at MCAS Iwakuni. To solve the problem, Willems had the idea of creating plugs that would stop the leaks. Miller created the pieces using 3D drafting software and MALS 12's new 3D printers. “I'm not really sure why no one thought to make this kind of kit before, but this design is going to have an impact across the Navy and Marine Corps,” Garcia said. The same team behind the engine ship kit also created a tool that makes it easier for maintenance Marines to grease the bearing on the F-18's M61A Vulcan, a Gatling-style rotary cannon that can fire 6,000 rounds a minute. The bearing on the cannon must be packed with grease every 30,000 rounds, a job that used to take two Marines more than 30 minutes, said Cpl. Christian Smellie, an aviation life-support systems technician who works at Iwakuni's 3D printing lab. Full article: https://www.stripes.com/news/pacific/iwakuni-marines-use-3d-printers-to-revolutionize-maintenance-for-fighter-jets-1.566446

• 

  November 25, 2019 | International, Aerospace

  MBDA place son Meteor sur le futur avion de combat KF-X

  MBDA est retenu par la Korea Aerospace Industries pour réaliser l'intégration de son missile air-air longue portée Meteor sur le futur avion de combat sud-coréen KF-X. La Korea Aerospace Industries (KAI), maître d'oeuvre du programme d'avion de combat multirôle KF-X, notifie à MBDA un contrat pour réaliser l'intégration du missile air-air longue portée Meteor sur le KF-X. Le contrat comprend le soutien technique des équipes de MBDA, la réalisation des différents équipements d'essai nécessaires (aéromécaniques, séparation, intégration,...) et la participation aux différentes campagnes de tests associant Meteor et KF-X. Le missile Meteor de MBDA équipe d'ores et déjà plusieurs avions de combat : Dassault Aviation Rafale, Airbus Typhoon et Saab Gripen. https://www.air-cosmos.com/article/mbda-place-son-meteor-sur-le-futur-avion-de-combat-kf-x-22081

• 

  July 28, 2020 | International, Naval

  After the US Navy’s Bonhomme Richard catastrophe, a far-reaching crackdown on fire safety

  By: David B. Larter WASHINGTON – U.S. Navy brass is telling sailors and contractors to put fire safety at the center of their work in the shipyards and on the waterfront in the wake of a catastrophic fire aboard the amphibious assault ship Bonhomme Richard. As Naval Sea Systems Command continues its formal assessment of the damage to Bonhomme Richard, the Navy has both sailors across the organization and contractors working on the ships reviewing their procedures and ensuring they are doing everything possible to prevent a second tragedy. Adm. Michael Gilday, the chief of naval operations, said the enterprise-wide effort was to prevent a similar event from taking place, a lesson he drew from the Navy's response to a string of accidents in 7th Fleet in 2017. “Could there be another Bonhomme Richard waiting to happen? If you go back to 2017, who would have predicted we'd have had two collisions of that magnitude within a month?” Gilday said in a July 16 interview with Defense News. “So, I'm not waiting for ‘No. 2' to decide we have a trend here. In a situation like this, one incident is enough for me to determine that there could be a trend and I'm not going to leave it to chance that there might be.” In the wake of the fire, he ordered fleet commanders to send a lengthy list of requirements to the waterfront, including a mandate to do fire safety inspections of every space on every ship. So-called “zone inspections” of each space on a ship are generally spread out over months, rather than packed into a week. The orders also included reviewing maintenance records on all damage control equipment – such as fire hoses and fire main connections, fire extinguishers, fixed fire suppression systems and firefighting gear – and ensure it is 100 percent accounted for. Additionally, each in-port duty section (a rotating group of sailors from the crew designated to stay on board the ship for 24 hours) was required to undergo a formal assessment as to their proficiency in firefighting and validate that they were properly manned to be effective. Contractors and shipbuilders have also been warned by the Navy to take fire safety seriously. In the days following the Bonhomme Richard fire, two minor fires – one on board the amphibious assault ship Kearsarge at General Dynamics NASSCO shipyard and another on the Navy's future carrier John F. Kennedy at Newport News shipbuilding – have curtailed work and prompted a doubling down on safety. In a Friday letter, Navy's top acquisitions official James Geurts told shipbuilders and contractors to take Bohnomme Richard as a lesson. "Anyone who steps aboard our ships must be ever vigilant about ensuring fire safety," Geurts wrote. "I urge you to use [the recent fire] to ensure that our work spaces are clean, that unnecessary clutter is removed, that all fire safety measures are being followed and that there is unrestricted access to firefighting and damage control equipment." ‘Gutted' The safety crackdown follows the Navy's worst in-port disaster since the 2012 fire on board the attack submarine Miami, which suffered a major conflagration while in deep maintenance at Portsmouth Naval Shipyard in Maine. That incident was later determined to be arson. The Bonhomme Richard fire, which experts fear may have damaged the “big deck” amphib beyond repair, raised troubling questions about how prepared sailors are to combat one of their most fearsome enemies: a shipboard fire, a threat they are trained to deal with from their earliest days in Boot Camp. In a letter this week from Gilday to all Navy flag officers and top enlisted leaders, he detailed how a series of explosions and a 1,200-degree inferno caused “extensive damage” to 11 of Bonhomme Richard's 14 decks. “There is fire and water damage, to varying degrees, on 11 of 14 decks,” Gilday wrote. “With the flight deck as a reference, I walked sections of the ship 5 levels below and had the opportunity to examine the superstructure. “The island is nearly gutted, as are sections of some of the decks below; some perhaps, nearly encompassing the 844 ft length and 106 ft beam of the ship ([Naval Sea System Command's] detailed assessment is ongoing). Sections of the flight deck are warped/bulging.” The fire on the Bonhomme Richard broke out the morning of July 12 while it was pierside in San Diego, California, undergoing maintenance. The blaze was aided by wind and explosions, Gilday wrote. “While response from the crew and federal firefighters was rapid, preliminary reports indicate there were two main factors that contributed to the intensity, scope, and speed of the fire,” Gilday wrote. “First was wind that fueled the fire as the vehicle storage area leads to the well deck, which opens to the air at the stern gate. The second were the explosions, one in particular, reportedly heard about 13 miles away. “The explosions, some were intense, and the uncertainty of their location and timing, led to a situation, that might have been under control late Sunday night, but expanded into a mass conflagration, spreading quickly up elevator shafts, engine exhaust stacks, and through berthing and other compartments where combustible material was present.” The Navy has launched dual investigations into the fire: A safety investigation, which are generally not released to the public so that witnesses can feel free to speak openly, and a more formal administrative investigation, which generally comes with disciplinary recommendations and are releasable to the public. https://www.defensenews.com/naval/2020/07/25/after-the-us-navys-bonhomme-richard-catastrophe-a-far-reaching-crackdown-on-fire-safety/