Filtrer les résultats :

Tous les secteurs

Toutes les catégories

    1729 nouvelles

    Vous pouvez affiner les résultats en utilisant les filtres ci-dessus.

  • Comment le F-35 est réapparu sur le radar d’Ottawa

    3 juin 2019 | Local, Aérospatial

    Comment le F-35 est réapparu sur le radar d’Ottawa

    Marc Godbout Justin Trudeau s'était engagé à ne pas acheter le F-35, l'avion de chasse de Lockheed Martin. Pourtant, de récentes manoeuvres rendent de plus en plus probable l'acquisition de l'appareil américain. Une réelle compétition aura-t-elle vraiment lieu pour remplacer les vieux chasseurs des Forces armées canadiennes? Les jeux de coulisse se sont intensifiés toute la semaine à Ottawa. L'enjeu est énorme : un contrat de 19 milliards de dollars pour 88 avions de combat canadiens. En toile de fond, le salon canadien des équipements militaires. Non seulement les lobbyistes sont plus actifs que jamais, mais leurs clients ont mis le paquet pour séduire et chercher à influencer le futur acheteur. Airbus et SAAB ont même fait venir d'Europe, par navire, des répliques de leurs avions de chasse respectifs. Mais au-delà des apparences, l'inquiétude s'est installée. Après le F-35, le F-35 Après des années d'attente, de dérapages et d'interminables débats, un appel d'offres du gouvernement fédéral doit finalement être lancé d'ici la mi-juillet. Il le sera juste avant la campagne électorale, près de quatre ans après l'élection des libéraux qui avaient promis d'amorcer le processus immédiatement en arrivant au pouvoir. Résultat? Le choix du gagnant ne sera annoncé qu'en 2022, et les premiers avions, livrés en 2025, au plus tôt. Les concurrents potentiels pour la construction des avions de chasse canadiens : Boeing (Super Hornet) Airbus (Typhoon) Saab (Gripen) Lockheed Martin (F-35) Quatre joueurs souhaiteraient être de la course. Mais le seront-ils tous? Le portrait pourrait très bien changer. Les pressions exercées par Washington sur Ottawa y sont pour beaucoup. L'administration Trump a obtenu des assouplissements au processus d'évaluation des retombées économiques au Canada pour s'assurer que le F-35 soit de la course. La politique canadienne d'approvisionnement militaire exige depuis très longtemps que les entreprises dépensent au pays l'équivalent de la valeur d'un contrat afin de renforcer l'industrie canadienne. Or, le programme du F-35, dont le Canada est l'un des neuf pays partenaires, est structuré autrement. Les entreprises canadiennes ont le droit de soumissionner pour des contrats mondiaux liés à la chaîne d'approvisionnement. Les pays partenaires ne peuvent, par contre, exiger des avantages économiques comme condition préalable à l'achat de l'appareil. Voilà que la récente révision obtenue par Washington permet à Lockheed Martin et son avion de ne pas être écartés de la compétition quoiqu'ils seraient pénalisés s'ils choisissent un système différent. On est donc bien loin de la promesse électorale de 2015 de Justin Trudeau, qui s'engageait à ne pas acheter l'avion de Lockheed Martin. Les libéraux ont tout fait pour se distancer du F-35 dans la foulée du fiasco qui collait à la peau des conservateurs. Mais la réalité a fini par rattraper le gouvernement Trudeau. « Sélectionner un appareil autre que le F-35 pourrait créer des tensions avec les Américains », soutient Justin Massie, professeur de science politique à l'UQAM. « Le F-35 est important pour l'administration Trump, qui veut développer davantage l'industrie militaire américaine. » Ce revirement a eu l'effet d'une douche froide chez les concurrents. « Il ne serait pas étonnant de voir des joueurs se retirer dès le départ ou en cours de route. Ils sont furieux », a confié à Radio-Canada une source très proche du dossier. Tant l'américaine Boeing que l'européenne Airbus et la suédoise Saab disent maintenant attendre « l'ensemble des exigences » de l'appel d'offres avant d'annoncer leurs intentions finales. « Nous sommes sur nos gardes [....] et de plus en plus incertains de vouloir nous lancer », a même indiqué un dirigeant de l'une de ces compagnies, sous le couvert de l'anonymat. Retour vers le futur Le temps est-il en train de jouer en faveur du F-35? Possiblement. « Le volume de production du F-35 entraîne la diminution du coût à l'unité qui est inférieur à celui de ses concurrents qui sont moins avancés sur le plan technologique », expliquait récemment Richard Shimooka dans un rapport de l'Institut Macdonald-Laurier. Alors que le coût par avion dépassait les 200 millions de dollars américains au début de la production en 2007, il devrait passer sous la barre des 80 millions d'ici 2020, selon le Pentagone. Plus de 390 appareils ont été livrés dans le monde. Et pas plus tard que cette semaine, le président américain annonçait la vente de 105 avions supplémentaires à l'issue d'un sommet avec le premier ministre japonais. Les pays qui ont choisi le F-35 : États-Unis Royaume-Uni Italie Pays-Bas Norvège Danemark Belgique Turquie Japon Australie Israël Corée du Sud Il s'est déjà écoulé neuf ans depuis l'annonce par le gouvernement Harper de l'achat de 65 avions F-35. « La modernisation de nos vieux F-18 a coûté beaucoup d'argent. Et l'acquisition de chasseurs intérimaires australiens a coûté au bas mot un milliard de dollars de plus aux contribuables canadiens », déplore Justin Massie. Neuf ans plus tard, le Canada a commencé à recevoir ses premiers F-18 australiens usagés, toujours dans l'attente d'une solution permanente. Il est quand même plutôt ironique de constater que l'Australie voulait s'en débarrasser pour recevoir ses premiers F-35 tout neufs. https://ici.radio-canada.ca/nouvelle/1173077/canada-avions-chasse-f-35-achat-armee

  • Rheinmetall rolls out robot rescue vehicle at CANSEC 2019

    3 juin 2019 | Local, Terrestre

    Rheinmetall rolls out robot rescue vehicle at CANSEC 2019

    DAVID PUGLIESE, OTTAWA CITIZEN Rheinmetall has rolled out at CANSEC 2019 in Ottawa a rescue model of its “Mission Master” robotic vehicle. The vehicle gives soldiers the ability to evacuate casualties over long distances either autonomously or via remote control. The rescue robot vehicle comes equipped with two basket stretchers with sliding provisions, head and foot immobilizers, oxygen masks and canisters, a monitor defibrillator, and other medical gear. All of these items would be impossible for a medic to carry on foot, Rheinmetall points out. Troops can operate the Mission Master from near or far using autonomous navigation. While transporting a wounded soldier using the system's stretcher, for example, accompanying medics can use the vehicle as a workstation to administer emergency care. Using the “follow me” function, the rescue robot can roll alongside other soldiers, who are busy making sure that the surrounding area is safe and secure, the company noted. “In both “follow me” and autonomous navigation modes, the Mission Master significantly relieves cognitive and physical stress, allowing troops to deal with the mission at hand,” according to Rheinmetall. https://ottawacitizen.com/news/national/defence-watch/rheinmetall-rolls-out-robot-rescue-vehicle-at-cansec-2019

  • Naval contracts and technology developments on display at CANSEC 2019

    3 juin 2019 | Local, Naval

    Naval contracts and technology developments on display at CANSEC 2019

    DAVID PUGLIESE, OTTAWA CITIZEN The CANSEC 2019 defence trade show in Ottawa has wrapped up, and while much of the focus and talk was on new fighter jets, the naval side of procurement didn't escape notice. A number of firms have recent contracts or technology advancements, as outlined in this article in Esprit de Corps magazine. ATLAS ELEKTRONIK GmbH recently announced successful SeaSpider sea trials that were done in co-operation with the German Bundeswehr Technical Center for ships and naval weapons, maritime technology and research. The SeaSpider is the world's first dedicated Anti-Torpedo Torpedo. Trials in the Baltic Sea were conducted on a WTD 71 multipurpose vessel, according to the company. Those involved the full “sensor to shooter” chain with Torpedo Detection, Classification and Localisation, or TDCL sonar, being successfully demonstrated with the third generation SeaSpider prototype with its above water launcher. At the test range both a Mk37 torpedo derived AUV and torpedoes of the DM2A3 type served as the threats. Those were detected and localized with passive and active TDCL and the data was used to cue the SeaSpider launch. SeaSpider acquired the threats and homed in into closest point of approach, the firm noted. The successful “intercept” was verified by acoustic and optical means. Saab's Sea Giraffe AMB naval radar will be used for the Royal Canadian Navy's Joint Support Ships. Saab will do the work on the project both in Sweden and Halifax. Deliveries of the radars are to take place between 2020 and 2022. Seaspan Shipyards has awarded MAN Energy Solutions Canada of Vancouver, BC, a contract valued at $55 million for work on the Royal Canadian Navy's new Joint Support Ships or JSS. MAN is one of several major systems integrators that Seaspan is working with in order to meet its commitments under the National Shipbuilding Strategy, the firm noted. Under this contract MAN will provide propulsion and power generation components for the JSS. This will include two MAN 12V32/44CR (Common Rail) propulsion engines equipped with environmental protection SCR technology, reduction gears, propulsion shafts, propellers, ship service diesel generator sets, and an emergency diesel generator set. Work on these components will take place in Europe at MAN's manufacturing facilities. Work taking place in Canada will include MAN providing the integration for these systems, training, testing, and support during the harbour acceptance trials and the JSS sea acceptance trials, according to Seaspan. MDA, a Maxar company, announced that it has signed a $4 million contract with Lockheed Martin Canada. That deal is for the initial phase of design work for the Canadian Surface Combatant ship's Electronic Warfare system. The Águas Azuis Consortium, formed by thyssenkrupp Marine Systems, Embraer Defense & Security and Atech, was selected by the Brazilian Navy for the construction of four defence ships in the Tamandaré Corvettes Class Program as preferred bidder. With thyssenkrupp Marine Systems' leadership and its naval systems expertise, the Águas Azuis Consortium companies will now form a specific purpose company for the implementation phase of the program, the firms noted. Atech, an Embraer Group company, will be the supplier of the Combat Management System and Integrated Platform Management System of the Tamandaré Class corvettes. It will be involved in the transfer of technology in cooperation with ATLAS ELEKTRONIK, a subsidiary of thyssenkrupp Marine Systems, and L3 MAPPS. Embraer Defense & Security will integrate sensors and weaponry into the combat system. Kognitiv Spark of Fredericton, NB will be providing the Royal Canadian Navy with the opportunity to test a Mixed Reality Remote Assistant Support system as part of a project that aims to improve maintenance and repairs aboard naval vessels. The system can be used by RCN marine technicians and weapons engineering technicians to ensure that RCN ships remain at a high-level of readiness for both routine training and operational deployments, according to the firm The project hopes to validate technology adopted from Kognitiv Spark, whose software is designed for use with the Microsoft HoloLens. The software leverages Augmented Reality, Mixed Reality, and the integration of Artificial Intelligence to improve efficiencies with ship operations including repairs, maintenance and knowledge transfer, the firm added. For remote maintenance, a subject-matter expert using this system can see what the HoloLens wearer sees from anywhere in the world. The expert can provide guidance using real-time voice and video, interactive 3D holograms and content, and live IoT data. Alternatively, the technician can use locally stored data to assist with routine tasks when a remote expert is not available. The holographic support is designed to improve decision making by facilitating decisive action and reducing errors by providing clarity and certainty of comprehension. Kognitiv Spark says it was awarded the contract due in part to its reputation from ongoing work with the Canadian Army and the Royal Canadian Air Force. https://ottawacitizen.com/news/national/defence-watch/naval-contracts-and-technology-developments-on-display-at-cansec-2019

  • No icebreakers in federal government’s $15.7B plan for new coast-guard ships

    3 juin 2019 | Local, Naval

    No icebreakers in federal government’s $15.7B plan for new coast-guard ships

    By Lee Berthiaume, The Canadian Press OTTAWA — The Canadian Coast Guard's recent struggles resupplying northern communities and rescuing ice-jammed ferries appear set to continue despite Prime Minister Justin Trudeau's promise to spend $15.7 billion on "a complete fleet renewal." That's because none of the 18 vessels the government announced last week that it plans to buy will be an icebreaker, meaning the coast guard will be forced to continue relying on its existing icebreaker fleet for the foreseeable future. Many of those are nearing — or have already exceeded — their expected lifespans, which has resulted in breakdowns and other problems that have affected coast-guard operations, such as resupply runs and assisting ferries in winter. Federal procurement minister Carla Qualtrough acknowledged on the sidelines of the annual Cansec arms-trade show this week "there's definitely a capability gap on icebreakers," but wouldn't say when it would be addressed. Qualtrough instead indicated that any announcement on more ships for the coast guard would likely come after the government adds a third shipyard to the two that are already partners in the federal shipbuilding plan. "There's definitely more ships coming," she said on Thursday. "It will really be dependent on how long it takes the third yard to get itself ready to build the kind of ships we need." The search is expected to start in the coming weeks, but while many observers expect Davie Shipbuilding in Quebec City to emerge victorious, a senior government official maintained a decision is unlikely before October's election. The government's planned $15.7-billion investment unveiled last week includes two Arctic patrol ships to be built by Irving Shipbuilding in Halifax and 16 so-called multipurpose vessels from Seaspan Shipbuilding in Vancouver. But those vessels are what officials describe as "ice-capable," rather than icebreakers, meaning the coast guard will need to continue to rely on its existing fleet for many of its operations. The icebreaker fleet did receive a boost on Thursday, when the Canadian Coast Guard officially welcomed the CCGS Molly Kool to its ranks after several months of conversion work at Davie. The CCGS Molly Kool is the first of three second-hand icebreakers that Davie has sold to the government, which the coast guard has said it plans to use for the next 15 to 20 years to fill any gaps until replacements are built. But while the government is spending millions to refit its current icebreakers, which are on average 35 years old, and keep them running as long as possible, the question remains when those replacements will arrive. The only new icebreaker currently in the government's multibillion-dollar shipbuilding plan is the polar-class CCGS John G. Diefenbaker, which was expected in 2017 before various delays pushed it back to the next decade. "We haven't built a coast guard-designed icebreaker since 1983. That was the last time," said Rob Huebert, an expert on the coast guard at the University of Calgary. "And anything we have bought is usually second-hand from industry." The coast guard doesn't have clout in Ottawa, Huebert said, which has translated into a lack of long-term planning or investment by successive governments — except when there are political points to be scored. And while the addition of a third yard to the federal shipbuilding plan should mean icebreakers will follow soon after, Huebert said it is all ad hoc and will simply lead to the same problems down the road. "I get incensed by the fact that we do not have any form of a long-term coast-guard renewal for icebreakers." Documents obtained by The Canadian Press warned more than a third of the coast guard's 26 large vessels, including its icebreakers, had exceeded their expected lifespans — and that many wouldn't survive until replacements arrived. The fleet's advanced age was also already affecting the coast guard's ability to do its job, including reduced search-and-rescue coverage, ferry-service disruptions and cancelled resupply runs to Arctic and coastal communities. —Follow @leeberthiaume on Twitter Lee Berthiaume, The Canadian Press https://www.nationalnewswatch.com/2019/05/31/no-icebreakers-in-federal-governments-15-6b-plan-for-new-coast-guard-ships/#.XPFqzBZKiUl

  • Tactical Armoured Patrol Vehicle project expects to wrap up by end of the year

    31 mai 2019 | Local, Terrestre

    Tactical Armoured Patrol Vehicle project expects to wrap up by end of the year

    DAVID PUGLIESE, OTTAWA CITIZEN The Tactical Armoured Patrol Vehicle project is close to wrapping up, with full operational capability of the equipment set for the end of this year, according to an update from the Canadian Forces and the Department of National Defence. All 500 vehicles have been accepted by Canada and sent to various bases across the country. CFB Gagetown has 127 TAPVs, CFB Valcartier has 129, CFB Montreal, 25, CFB Borden, 2, CFB Shilo 42, CFB Edmonton, 63, and CFB Petawawa, 112, according to the update. Initial operational capability was achieved in late August, 2017, although some TAPVs were used months before that during the flood relief mission in Quebec, the update pointed out. Since April 2014, there have been 10 incidents when Tactical Armoured Patrol Vehicles have tipped on to their sides, six where they have rolled over completely, and four where they have caught fire. Pat Finn, the assistant deputy minister in charge of procurement at the Department of National Defence, told Postmedia earlier this year there have been no serious injuries as a result of the incidents. The Conservative government announced the TAPV contract in 2012 as part of its re-equipping of the Canadian Army. Canada bought 500 TAPVs from Textron, a U.S.-based defence firm, at a cost of $603 million. The TAPV is a wheeled combat vehicle that will conduct reconnaissance and surveillance, security, command and control, and armoured transport of personnel and equipment. “Upon review of the major TAPV incidents, it has been identified that the most common contributing factors of these incidents tends to be human error due to limited familiarity time operating the vehicles,” the army noted in an emailed statement to Postmedia. The army pointed out that investigations into the incidents did not reveal any design or mechanical faults. The TAPV project will cost taxpayers a total of $1.2 billion, which not only includes the vehicles but also includes the building of infrastructure to house them, as well as the purchase of ammunition and service support for the equipment. There have been a variety of issues related to the fires. See this article here for further details: https://ottawacitizen.com/news/national/defence-watch/tactical-armoured-patrol-vehicle-project-expects-to-wrap-up-by-end-of-the-year

  • Thales: attribue des contrats pour des navires canadiens

    31 mai 2019 | Local, Naval

    Thales: attribue des contrats pour des navires canadiens

    (CercleFinance.com) - Thales, dans son rôle d'intégrateur, annonce avoir attribué des contrats clés pour les nouveaux navires de soutien interarmées du Canada. Des contrats ont ainsi été attribués à DRS Technologies Canada, située à Ottawa (Ontario), et à OSI Maritime Systems, située à Burnaby (Colombie-Britannique). ' Dans le cadre de son contrat avec Thales, OSI fournira et facilitera l'installation d'un système intégré de passerelle et de navigation (IBNS). Le système intégré de navigation et tactique d'OSI est un système entièrement évolutif conforme aux normes de l'OMI (Organisation maritime internationale) et de l'OTAN. DRS Technologies Canada Ltd., quant à elle, fournira les systèmes de communication internes, qui comprennent le système de communication vocale et tactique sécurisée, le système téléphonique du navire et le système principal de diffusion et d'alarme ', explique Thales. https://www.abcbourse.com/marches/thales-attribue-des-contrats-pour-des-navires-canadiens_472019_HOp.aspx

  • LE SCANNER HANDYSCAN 3D DE CREAFORM SATISFAIT AUX EXIGENCES DE BOEING

    31 mai 2019 | Local, C4ISR

    LE SCANNER HANDYSCAN 3D DE CREAFORM SATISFAIT AUX EXIGENCES DE BOEING

    Le scanner 3D portable de classe métrologique permet maintenant d'inspecter les enfoncements et les assemblages sur tous les modèles d'avions commerciaux de Boeing Creaform, le leader mondial en solutions de mesure 3D portables et de solutions de contrôles non destructifs (CND), annonce aujourd'hui que son scanner 3D portable de classe métrologique HandySCAN 3D™ permet d'enregistrer les attributs physiques des enfoncements et des assemblages pour tous les modèles d'avions commerciaux de Boeing. Boeing a publié une lettre de service comprenant un guide pour l'utilisation des scanners 3D pour mesurer les enfoncements et les assemblages sur les avions. La solution SmartDENT 3D™ et le scanner HandySCAN 3D ont été utilisés pour le processus des exigences de qualité de Boeing dans la lettre de service. « Creaform est fier de constater que des leaders tels que Boeing se tournent vers des solutions de numérisation 3D pour l'inspection des défauts de surface. Avec SmartDENT 3D, notre objectif est de fournir le processus d'évaluation des dommages le plus précis possible à nos clients, afin qu'ils prennent des décisions sécuritaires et documentées, tout en remettant leurs avions en service », déclare Jérôme Beaumont, Responsable des ventes globales NDT chez Creaform. Aperçu des avantages de SmartDENT 3D : Vitesse : 80 fois plus rapide que la technique de jauge de profondeur. Il s'agit de l'outil d'inspection des dommages de surface pour avions le plus rapide et fiable disponible sur le marché. Mesures de qualité métrologiques pour la maintenance d'avion : Le scanner dispose d'une exactitude allant jusqu'à 0,025 mm, d'une résolution allant jusqu'à 0,100 mm, d'une répétabilité élevée et d'un certificat traçable. Évaluations de réussite/échec intuitives : Avec sa conception intuitive et la visualisation du logiciel en temps réel, les solutions de CND de Creaform garantissent des courbes d'apprentissage courtes et une influence minime de l'expérience de l'opérateur sur l'exactitude des résultats. Visualisation en direct et portabilité : Avec moins d'un kilo sur la balance, le scanner portable est l'outil parfait pour travailler dans les hangars ou directement à l'extérieur. Les utilisateurs peuvent facilement effectuer une inspection de surface 3D sur n'importe quelle pièce d'un avion sur lesquelles ils utiliseraient des techniques manuelles, y compris sur et sous les ailes. En plus de leur conformité avec la lettre de service de Boeing, les scanners HandySCAN 3D de Creaform sont cités dans le manuel de l'équipement technique d'Airbus, plus particulièrement dans leur manuel de réparation des structures. Les ingénieurs de la qualité et les opérateurs MRO souhaitant réduire leurs délais d'exécution et leur rentabilité peuvent contacter Creaform pour en apprendre davantage sur les solutions CND. https://www.creaform3d.com/fr/news/le-scanner-handyscan-3d-de-creaform-satisfait-aux-exigences-de-boeing

  • GA-ASI Integrating L3 WESCAM's MX™-20 onto Multiple Platforms as Part of Team SkyGuardian Canada

    31 mai 2019 | Local, Aérospatial

    GA-ASI Integrating L3 WESCAM's MX™-20 onto Multiple Platforms as Part of Team SkyGuardian Canada

    OTTAWA, Ontario — As members of Team SkyGuardian Canada and supporters of the MQ-9B SkyGuardian Remotely Piloted Aircraft System (RPAS) for Canada's RPAS Project, L3 WESCAM and General Atomics Aeronautical Systems, Inc. (GA-ASI) are integrating WESCAM's MX™-20 electro-optical and infrared (EO/IR) imaging system onto the SkyGuardian RPAS, as well as the MQ-9 Reaper that is currently being operated by several NATO countries. Team SkyGuardian Canada is a coalition of Canadian companies committed to delivering the best RPAS for Canada. Field-proven, with extensive deployment, WESCAM's MX-20 is equipped with high-sensitivity multi-spectral sensors for day, low-light and nighttime missions, and offers low-risk “plug-and-play” installation. The MX-20 operates with detection and recognition capabilities at high altitudes in support of persistent surveillance missions. “Integrating capabilities from L3 WESCAM and our other Team SkyGuardian partners – CAE and MDA – provides the most capable RPAS solution and the best economic value for Canada,” said Linden Blue, CEO, GA-ASI. “The MX-20 integration on MQ-9 builds on our successful integration of the WESCAM MX-15 onto our Predator XP aircraft. Taking advantage of our close North American relationship, our companies can cooperate to provide unprecedented levels of innovation and business opportunity with our RPAS.” GA-ASI has been proactive in integrating L3 WESCAM products onto their RPAS. “Team SkyGuardian is a significant benefit to L3 WESCAM and provides more opportunities for the modular growth path of the WESCAM MX-20 as mission portfolios evolve and the battlespace continues to change on a global scale,” said Jacques Comtois, Vice President and General Manager of L3 WESCAM. “MX systems are the eyes of customers across more than 80 countries worldwide.” L3's WESCAM MX-Series has been engineered to focus on the three factors that drive maximum range: resolution, magnification and stabilization. As a result, each turret has outperformed its major competitor in every performance area, giving WESCAM the longest EO/IR target identification and designating ranges in the industry. GA-ASI is the world's leading manufacturer of RPAS and related mission systems. Team SkyGuardian Canada combines the best of Canadian industry with the world's most advanced Medium-Altitude Long-Endurance (MALE) RPAS, the MQ-9B SkyGuardian, being developed to fulfill Canada's RPAS project requirements. For more information on Team SkyGuardian, go to teamskyguardiancanada.com. High-resolution photos of MQ-9B SkyGuardian areavailable to qualified media outlets from the GA-ASI media contact list.About GA-ASI General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is the leading designer and manufacturer of proven, reliable Remotely Piloted Aircraft (RPA) systems, radars, and electro-optic and related mission systems, including the Predator® RPA series and the Lynx® Multi-mode Radar. With more than five million flight hours, GA-ASI provides long-endurance, mission-capable aircraft with integrated sensor and data link systems required to deliver persistent flight that enables situational awareness and rapid strike. The company also produces a variety of ground control stations and sensor control/image analysis software, offers pilot training and support services, and develops meta-material antennas. For more information, visit www.ga-asi.com. Predator and Lynx are registered trademarks of General Atomics Aeronautical Systems, Inc. https://business.financialpost.com/pmn/press-releases-pmn/business-wire-news-releases-pmn/ga-asi-integrating-l3-wescams-mx-20-onto-multiple-platforms-as-part-of-team-skyguardian-canada

  • Procurement minister defends rule change for F-35 as necessary for competition

    31 mai 2019 | Local, Aérospatial

    Procurement minister defends rule change for F-35 as necessary for competition

    The Canadian Press, Lee Berthiaume OTTAWA — The federal procurement minister is defending the government's plan to loosen procurement rules for the F-35 stealth fighter in the face of questions and concerns from companies that make competing jets. Speaking at the annual Cansec arms-trade show Thursday, Public Procurement Minister Carla Qualtrough insisted the move is needed for a robust competition to replace Canada's aging CF-18s. That competition is expected to result in a $19-billion deal for a new fleet of fighters. “The innovations and modifications we are adopting will enable participation from all eligible suppliers while applying the same rules to everyone on a level playing field,” Qualtrough said during a breakfast speech. “This is a complex process. As complex as any the federal government has ever conducted.” The government's plan involves lifting a long-standing requirement that companies legally commit to putting some of their contract money back into Canadian industry if they win a defence competition. The proposal followed U.S. complaints that the requirement violated an agreement Canada signed in 2006 to become one of nine partner countries in the development of the F-35, which is being built by Lockheed Martin. While partner countries can buy F-35s at a discount, they must also contribute money to the planes' development — in Canada's case, more than $500 million to date. Partners are also forbidden from requiring economic benefits as a condition for buying the plane. Companies in each partner country instead compete for contracts associated with the aircraft, with Canadian industry having won $1.5 billion so far. But representatives from Boeing and Saab, which make the Super Hornet and Gripen fighter jets, respectively, said Wednesday the previous policy worked well in ensuring defence contracts benefit Canada economically. And they warned abandoning the requirement that bidders commit to reinvesting in Canada could hurt the country's aerospace industry, which would in turn make it more difficult for the military to support its new jets. Industry sources say representatives for the Eurofighter Typhoon, the fourth aircraft expected in the competition aside from the F-35, Super Hornet and Gripen, have expressed similar sentiments. Qualtrough, offering the government's most extensive defence of the plan to date, insisted that despite letting bidders choose not to make contractual obligations to re-invest, the government is committed to ensuring the largest economic benefits possible. Under the new process, bidders can still guarantee that they will re-invest back into Canada if their jet wins the competition and get full points — which is the likely approach for Boeing, Saab and Eurofighter. Those like Lockheed Martin that can't make such a commitment will be penalized and asked to establish “industrial targets,” lay out plans for achieving those targets and sign a non-binding agreement promising to make all efforts to achieve them. “No one should misunderstand this: our government remains committed as strongly as ever to the (industrial benefit) policy in this competition,” Qualtrough said during her speech. “We're getting the fighter jet for the RCAF's needs, at the right price, and with the right economic benefits for Canadians.” The government has said it plans to launch the long-overdue formal competition to select Canada's next fighter jet in July, nearly four years after the Liberals were elected in 2015 on a promise to hold an immediate competition. Companies are expected to submit their bids next winter, with a formal contract signed in 2022. The first plane won't arrive until at least 2025. –Follow @leeberthiaume on Twitter https://nationalpost.com/pmn/news-pmn/canada-news-pmn/procurement-minister-defends-rule-change-for-f-35-as-necessary-for-competition

Partagé par les membres

  • Partager une nouvelle avec la communauté

    C'est très simple, il suffit de copier/coller le lien dans le champ ci-dessous.

Abonnez-vous à l'infolettre

pour ne manquer aucune nouvelle de l'industrie

Vous pourrez personnaliser vos abonnements dans le courriel de confirmation.