2 juin 2024 | Local, Naval

Lockheed Martin Canada Awards L3HARRIS the Integrated Communications System Contract

Lockheed Martin Canada has awarded L3Harris Technologies the Integrated Communications System for the Canadian Surface Combatant of the Royal Canadian Navy, aimed at bolstering their operational efficacy and security on maritime missions. 

https://www.epicos.com/article/837461/lockheed-martin-canada-awards-l3harris-integrated-communications-system-contract

Sur le même sujet

  • RCAF working toward new sniper pod placement on CF-188 Hornet

    14 mai 2018 | Local, Aérospatial

    RCAF working toward new sniper pod placement on CF-188 Hornet

    Chris Thatcher In a two-by-three metre wind tunnel at the National Research Council of Canada's (NRC) aerospace research centre in Ottawa, aerospace engineers are gathering data for the Royal Canadian Air Force (RCAF) this week to validate the placement of the sniper pod on the centreline station of the CF-188 Hornet. “For this configuration, we are running at close to takeoff and landing speeds to simulate the take off and landing of the F-18, about 100 metres per second or almost 200 knots,” explained Melissa Richardson, an aerodynamics research officer and the project manager for the testing process, as wind whipped over the inverted nose landing gear and sniper pod. The CF-188 fighter jet has carried a certified sniper pod on the left side of the fuselage, below the engine intake, since the aircraft were upgraded in the early 2000. But lessons from recent operations over Libya in 2011 and Iraq and Syria between October 2014 and March 2016 convinced pilots they would have a better view of possible targets with the centerline placement. “We found a lot of our missions revolved around looking at the ground, monitoring areas of interest and targets for missions that are four to five hours long,” said Capt Tom Lawrence, a CF-188 pilot and the project officer for fighter weapons and equipment. “When [pilots] are manoeuvring their aircraft, there is a chance of the aircraft actually masking the targeting pod. Putting [it] on the centre of the aircraft allows a larger field of regard.” Rather than bank left to maintain focus on a target, the new placement should ensure an uninterrupted view of the ground or target aircraft, “taking that frustration out of the pilot's mind,” he said. “They can just focus on the imagery and the task at hand.” Lawrence said it could also make it easier for pilots to employ weapons and assess battle damage effects. The purpose of the wind tunnel tests is to measure the aerodynamics created by the nose landing gear on the sniper pod mounted behind it at times when it is most exposed to turbulence, said Richardson. Among concerns before the tests began were the effect of significant vibration on the pod and the possibility of debris being kicked up by the wheels and striking its protective glass shield. “[We need to] make sure the aircraft is safe to operate with the sniper pod on this new location. That means it can take off and land without excessive vibration, that the loads are still within acceptable limits,” explained Capt David Demel, the certification authority with the RCAF's Technical Airworthiness Authority. “This is the goal of the current wind tunnel test, to confirm that before we move to the flight test phase in Cold Lake in the September timeframe.” A second a high-speed equivalent test will be conducted by the NRC at its high speed trisonic wind tunnel in about three weeks, using a six per cent scale model, that will include ensuring engine intake airflow is not affected. Test pilots with the Operational Test and Evaluation Unit in Cold Lake will then recertify operational airworthiness of the sniper pod in its new placement. While the testing facilities are being provided by the NRC, the vibration data is being gathered and analyzed by Bombardier, which has provided some of the instrumentation. The sniper pod and landing gear were installed in the wind tunnel by L-3 MAS, which will have the task of mounting the pods in the new location on the entire CF-188 fleet–including the 18 F/A-18 Hornets the government is negotiating to buy from the Royal Australian Air Force–once approved. “We're all collaborating on the project as it goes through each phase, from technical airworthiness to operational airworthiness,” said Lawrence. https://www.skiesmag.com/news/rcaf-planning-new-sniper-pod-placement-cf-188-hornet/

  • CAE upgrades trainers at 15 Wing Moose Jaw

    25 novembre 2019 | Local, Aérospatial

    CAE upgrades trainers at 15 Wing Moose Jaw

    Ahead of the Interservice/Industry Training, Simulation, and Education Conference (I/ITSEC), the world's largest military training and simulation event to be held next week in Orlando, Fla., CAE announced it has completed major upgrades to the CT-156 Harvard (T-6) and CT-155 Hawk flight training devices (FTDs) used as part of the NATO Flying Training in Canada (NFTC) program at 15 Wing Moose Jaw, Sask. The upgrades were done on three CT-156 Harvard FTDs and one CT-155 Hawk FTD that are used extensively for ground-based training elements of the NFTC pilot training syllabus. CAE replaced computing hardware on the simulators, added new visual display systems, updated the instructor operator stations, and upgraded the image generators to the latest CAE Medallion series. CAE will now begin upgrading the CT-155 Hawk FTD located at 4 Wing Cold Lake, Alta., which is used as part of phase IV fighter lead-in training under the NFTC program. “The ground-based training system and use of simulators has become increasingly important for military pilot training,” said France Hébert, vice-president and general manager, CAE Canada. “With the upgraded flight training devices used for NATO Flying Training in Canada, we will now be able to deliver ground-based training that is more immersive and realistic, which in turn contributes to the more effective and efficient delivery of live flying training.” The effectiveness of the upgraded CT-156 Harvard and CT-155 Hawk FTDs is already benefiting student pilots. The new visual systems provide more realism in the synthetic environment and have enabled training tasks such as formation flying and tactical scenarios to be rehearsed in the simulators, thus enhancing the efficiency of performing these tasks during live flying training. As the prime contractor for the NFTC program, CAE operates the NFTC base facilities, delivers the ground-school classroom and simulator training, and supports the live flying training on a fleet of Beechcraft T-6 (CT-156 Harvard) and BAE Systems Hawk (CT-155 Hawk) aircraft. CAE operates the NFTC program out of 15 Wing Moose Jaw and 4 Wing Cold Lake, and the program is designed and delivered in cooperation with the Government of Canada to support pilot training for the Royal Canadian Air Force and allied militaries. The NFTC program combines basic, advanced, and lead-in fighter training as part of the comprehensive military pilot training program. https://www.skiesmag.com/press-releases/cae-upgrades-trainers-at-15-wing-moose-jaw

  • Armée canadienne | L’approvisionnement en déroute

    13 avril 2021 | Local, Aérospatial, Naval, Terrestre, C4ISR, Sécurité

    Armée canadienne | L’approvisionnement en déroute

    S'il existe un récif sur lequel le gouvernement fédéral s'échoue continuellement depuis des décennies, c'est bien celui de l'approvisionnement militaire. Aux prises avec des décisions aux conséquences financières considérables, les gouvernements tergiversent, souvent plombés par des enjeux politiques et par l'influence des militaires.

Toutes les nouvelles