12 février 2021 | International, Aérospatial, Naval, Terrestre, C4ISR, Sécurité

How Republicans might accept a smaller defense budget

By:

WASHINGTON ― California Republican Rep. Ken Calvert is willing to meet Democratic lawmakers partway in their reported plans to trim the defense budget: cut back on civilian employees, not equipment and modernization.

“Like everything else in government, personnel is your biggest cost, and the civilian-to-uniform ratio ... is at an all-time high,” Calvert, the ranking member of the House Appropriations Committee's defense subpanel, said in an interview Wednesday. “Our inability to correct that trend is eating away at our military, our procurement, our readiness, all the above, and so we need to do this.”

President Joe Biden is expected to release his federal budget plan in April, but battle lines are being drawn on Capitol Hill ahead of what is expected to be a tighter military budget than in recent years.

While some key Republicans want to protect the military budget increases that came under then-President Donald Trump, or even build upon them, Calvert said he is open to “responsible reductions.” He is offering civilian cuts as an alternative to cutting end strength and weapons platforms.

“Rather than reducing [personnel in] uniforms ― and I think there's some talk about doing that, especially in the Army ― we need to look at the civilian workforce, which is at the highest ratio to uniformed service members than it has ever been,” Calvert said.

“If you're going to cut defense, are you going to cut procurement? People are arguing we need to build the Columbia-class submarine and Virginia-class submarine ― and I agree ― that we [keep the] Space Force, and [that] our satellite program is woefully behind ― and I agree. Where do you make your reductions when your overwhelming cost is personnel?”

Under Calvert's bill, the Rebalance for an Effective Defense Uniform and Civilian Employees Act, or Reduce Act, a 15 percent cut to the civilian workforce overall and a cap for the Defense Department's Senior Executive Service at 1,000 employees would have to be in place by fiscal 2025 and remain through 2029. The defense secretary would be empowered to use voluntary-separation and early-retirement incentives toward the reduction.

The legislation, which has been introduced several times before, was inspired by a 2015 study by the Defense Business Board that illustrated how the Department of Defense could save $125 billion over five years by slashing overhead.

Still, the proposal to cut civilians would face new optics this year. As civilian voices were muted in favor of uniformed leaders under the Trump administration, Defense Secretary Lloyd Austin, a former general, committed under bipartisan pressure to “rebalance” Pentagon decision- and policy-making in favor of civilian leaders.

It's also a different tact than that of the House Armed Services Committee's new top Republican, Rep. Mike Rogers, who plans to guard against cuts and would prefer a 3-5 percent increase in defense spending ― which Pentagon leaders say is required to carry out the 2018 National Defense Strategy.

It's still early in the budgeting cycle, and the two may align. But in meantime, Calvert's approach offers something to fiscal conservatives, and it tracks with past efforts from Rogers' predecessor, former Rep. Mac Thornberry, R-Texas.

Even if Republicans can fend off a top-line cut or win an adjustment for inflation to keep shipbuilding and aircraft procurement on track, Calvert said he supports cutting the Defense Department's civilian workforce.

“Hey, I hope Mike's right. I mean, he is a good friend, but I think he's a realist too,” Calvert said. “I worked with his predecessor on procurement reform, I'm trying to do some personnel reform, and we need those reforms on both sides.”

For their part, Democrats swiftly rejected Calvert's legislation, making it one of the first skirmishes of the annual battle over the defense budget. The defense subpanel's new chairwoman, Rep. Betty McCollum, D-Minn., said she discussed the matter with Calvert and disagrees with him.

“His proposal could lead to some of the most talented and committed DOD public servants losing their jobs,” McCollum said in a statement. “While we agree there is excess defense spending, my focus is on making smart investments that yield demonstrable outcomes by cutting waste and ending subsidies for outdated and unnecessary programs and facilities. In my view, the existing Department of Defense civilian workforce is mission critical to ensuring our national security.”

The American Federation of Government Employees has historically opposed the bill, and a spokesman said funding and defense policy legislation passed last year prohibit civilian workforce cuts “without regard to impacts on readiness, lethality, military force structure, stress of the force, operational effectiveness and fully burdened costs.”

With 768,000 federal employees working across all Defense Department components, the proposed cut amounts to 100,000 employees. Between 2015 and 2019, an average of just under 82,000 employees left DoD jobs each year.

Calvert contends his 15 percent cut could be accomplished through attrition, not firings, and target “growth in middle management,” not the supply depots scattered around the country that have political backing. Previous cuts of civilian personnel have fueled increases in contracting costs ― and Calvert said he is open to cutting those too, in partnership with McCollum.

“There would be discretion on the part of the people running the Pentagon; there are people you don't want to lose, they're in a special category, I get it,” Calvert said. “There are probably a lot of people you wouldn't miss, people up for retirement.”

Democrats are more apt to take on nuclear modernization, which is projected to cost the Pentagon more than $240 billion in taxpayer dollars through 2028. In the balance is the contract for the Ground Based Strategic Deterrent, awarded to Northrop Grumman last year, to replace aging, land-based intercontinental ballistic missiles.

Politico reports that progressive lawmakers and disarmament advocates are lobbying allies in the Biden administration for a pause in the GBSD program, while the Air Force and its allies in Congress, think tanks, and defense contractors are sharpening their arguments to preserve the program.

Calvert acknowledged criticism of nuclear spending from House Armed Services Committee Chairman Adam Smith, D-Wash., but said big cuts to the nuclear triad lack the backing to succeed. (The panel rejected a funding cut for GBSD last year.)

“I know Adam has been critical of that, but there's absolute support for redundancy of the deterrent within the Republican ranks, and so I don't see that going away. What I'm hearing so far out of the administration is that they feel the same way, so I don't think that's going to happen,” Calvert said.

Austin and Deputy Defense Secretary Kathleen Hicks have voiced support for nuclear modernization broadly but stopped short of pledging to uphold the current nuclear modernization strategy in its entirety.

Nuclear modernization cutbacks would “weaken the United States,” Calvert argued.

“We're not just thinking about Russia; we've got China, who's rapidly militarizing space, and their missile capability is improving. Obviously we've got countries like North Korea or Iran that are building their own missile capability, so we have to have a strong deterrent to make sure we are ready for any contingency.”

Jessie Bur of Federal Times and Leo Shane III of Military Times contributed to this report.

https://www.defensenews.com/congress/2021/02/11/how-republicans-might-accept-a-smaller-defense-budget/

Sur le même sujet

  • Leonardo DRS awarded up to $462 million contract to provide U.S. Navy Advanced Combat Networking Hardware

    1 mai 2020 | International, C4ISR

    Leonardo DRS awarded up to $462 million contract to provide U.S. Navy Advanced Combat Networking Hardware

    Arlington, VA, April 28, 2020 - Leonardo DRS, Inc. announced today that it has received a contract from the U.S. Navy to produce advanced consoles and display systems to support the Navy's future surface ship combat system. The awarded contract is worth more than $62 million with options that could be worth up to $462 million. The Leonardo DRS Naval Electronics business unit will provide a suite of Common Display System (CDS) consoles, thin client displays, multi-mission displays, and support equipment. The CDS consoles are a set of open-architecture watch station display consoles comprised of two different console variants: water-cooled and air-cooled. The common display hardware provides the interface between the sailor and the ship's combat systems. “Building these advanced systems gives U.S. Navy sailors the latest in combat networking hardware and provides mission-critical fleet modernization and readiness requirements today and into the future,” said Tracy Howard, senior vice president and general manager of the Leonardo DRS Naval Electronics business. “We are proud to be a trusted partner with the Navy and this contract builds on our long relationship supplying reliable products, from computing hardware infrastructure for combat systems to tactical networks and common shipboard processors,” he said. The Common Display System consoles are the next-generation of hardware infrastructure representing the latest technology available on the market. Leonardo DRS has a long history of producing reliable advanced hardware for all Navy surface and subsurface platforms for uses in combat systems, tactical networks, processing and machinery control. Work will be performed at the Leonardo DRS Naval Electronics facility in Johnstown, PA. About Leonardo DRS Leonardo DRS is a prime contractor, leading technology innovator and supplier of integrated products, services and support to military forces, intelligence agencies and defense contractors worldwide. Its Naval Electronics business unit provides leading naval computing infrastructure, network and data distribution and middleware enterprise services, as well as world-class manufacturing and support capabilities. Headquartered in Arlington, Virginia, Leonardo DRS is a wholly owned subsidiary of Leonardo S.p.A. See the full range of capabilities at www.LeonardoDRS.com and on Twitter @LeonardoDRSnews. For additional information please contact: Michael Mount Senior Director, Public Affairs +1 571 447 4624 mmount@drs.com View source version on Leonardo DRS: https://www.leonardodrs.com/news/press-releases/leonardo-drs-awarded-up-to-462-million-contract-to-provide-us-navy-advanced-combat-networking-hardware/

  • Aircraft makers sweeten their offers in high-stakes Swiss warplane race

    30 novembre 2020 | International, Aérospatial

    Aircraft makers sweeten their offers in high-stakes Swiss warplane race

    By: Sebastian Sprenger and Valerie Insinna COLOGNE, Germany, and WASHINGTON — Four aircraft makers have submitted final offers for Switzerland's $6.5 billion aircraft program, with Airbus and Lockheed Martin touting different approaches to assembling their planes locally. Nov. 18 was the deadline for the quartet of hopeful vendors, which also includes Boeing and Dassault, to deliver their vision — and price — for one of the largest procurement programs in Europe. Switzerland is looking for somewhere between 36 and 40 new aircraft to police the country's airspace. The degree of local industry participation is shaping up to be a major factor for the famously independence-minded Swiss. Airbus got an assist from four Eurofighter operators — Germany, Spain, Italy and the U.K. — who sent their ambassadors in Switzerland to a Nov. 19 news conference to talk up the prospect of a grander industrial and political partnership that would follow a Eurofighter pick. The Swiss are expected to make a decision in early summer 2021, following a referendum vote this September that narrowly greenlighted the budget. The Airbus offer includes final assembly of all aircraft by way of a partner company in Switzerland, the details of which the company plans to announce in December. Michael Flügger, Germany's ambassador in Switzerland, touted the possibility of Eurofighter-based airspace-patrol cooperation along the Italy-Switzerland-Germany axis. In addition, he said, Switzerland joining the airplane's user club would mean the country can “export” training flight noise to remote areas in the other partner countries. Franz Posch, who heads the Airbus campaign in Switzerland, told reporters that the company's plan to locally assemble all 40 of the notional aircraft would “more than fulfill” the offset requirements established by the Swiss government. Lockheed Martin, with its F-35, also has high hopes for the Swiss competition, hoping to broaden the plane's user base in Europe. The company's offer includes a basic program of 36 jets, with options for an additional four aircraft, Mike Kelley, who leads the company's F-35 efforts in Switzerland, said during a Nov. 19 roundtable with reporters. While Switzerland would be able to purchase parts through the spares pool shared by all F-35 operators, the offer also contains a six-month deployed spares package — a separate pot of parts that would be managed by the Swiss government, which was necessary to meet Swiss autonomy requirements. To meet requirements for industrial participation, Switzerland would have the opportunity to domestically produce about 400 canopies and transparencies for F-35 aircraft, and Lockheed would establish a European hub for the maintenance, repair and overhaul of F 35 canopies and transparencies in Switzerland. In addition, the country would take on certain F-35 engine and airframe sustainment projects focused on maintaining the Swiss Air Force's operational autonomy, Kelley said. Lockheed also plans to partner with Swiss industry to create a cyber center of excellence, which would prototype a unique data network for Switzerland and build a test bed that would allow Swiss companies to test cyber capabilities in a secure environment. On top of those efforts, Lockheed is offering one last industrial participation opportunity to Switzerland. For an additional cost, Switzerland will be able to conduct the final assembly of four F-35 aircraft at existing RUAG facilities in Emmen, allowing the Swiss technicians that currently work on the country's aging Hornet fleet to build a deeper knowledge of the aircraft's design. That option would add a “significant cost” to the total program, Kelley said, but could allow for overall savings throughout the life cycle of the program. Boeing, meanwhile, has positioned its offer of an F-18 Super Hornet fleet as a logical extension of Switzerland's existing F-18 infrastructure. “As an F/A-18 operator, Switzerland will have the option to reuse up to 60 percent of existing physical and intellectual infrastructure, making the transition to a Super Hornet easier and more cost effective over the life of the aircraft,” the company said in a statement. The aircraft offer, the statement added, would “easily fit” within Switzerland's current F-18 operating budget. The reference to cost comes after Swiss officials stressed that the fighter portion of the Air 2030 air defense modernization program includes a cost ceiling of 6 billion Swiss francs (U.S. $6.6 billion), with with an eye on potential price reductions along the way. “Currently, Boeing is working with more than 100 current and new partners across Switzerland to identify the right opportunities for its New Fighter Aircraft industry plan,” the company said. France's Dassault, with its offer of the Rafale, is the only vendor keeping its cards close to its chest. Citing a commitment to confidentiality, a spokeswoman told Defense News the company had no plans to characterize its offer nor the “nature of the relationship” between the Swiss and French governments to that end. https://www.defensenews.com/global/europe/2020/11/29/aircraft-makers-sweeten-their-offers-in-high-stakes-swiss-warplane-race/

  • Collins Aerospace selected by AFRL to build thermoplastic fin for F-16

    14 octobre 2022 | International, Aérospatial

    Collins Aerospace selected by AFRL to build thermoplastic fin for F-16

    Under the three-year contract, the proposed work includes application of a specialized welding process, component design and prototype fabrication for the F-16 ventral fin

Toutes les nouvelles