31 juillet 2020 | International, C4ISR
The Army's new network tools, set to be deployed to units in 2021, were heavily influenced by a new factor: soldiers.
Through exercises and training events, the Army's Network Cross-Functional Team received feedback on its design decisions for Capability Set '21, the set of new network tools set to be delivered to soldiers next year as part of the service's network modernization efforts.
“This is the first time really in recent history that the network has really focused on soldier feedback. And it's important and it played a huge role in that,” said Col. Garth Winterle, project manager for tactical radios at the Army's Program Executive Office Command, Control, Communication-Tactical.
The Army recently completed its critical design review of Capability Set '21 and is in the beginning stages of procuring network pieces for delivery. In the lead-up to making purchases, feedback from units helped show the differences between how the new network tools perform in the field versus in a lab.
“Soldier ingenuity, leader know-how, the skill craft that our soldiers bring and the tradecraft they utilize in the field is a lot different than how we conceptualize it back here,” Col. Rob Ryan, deputy director of the Network CFT at Army Futures Command, said at a C4ISRNET event in June.
Testing for the capability set has been ongoing in lab-run experiments and with limited field tests in the last few months. Through the field experiments, the Army modernization team received feedback from units on what volume of various capabilities the soldiers needed, what capabilities were usable and what “attributes” of each capability soldiers found to be more important than others, said Winterle.
Disruptions caused by both the coronavirus pandemic and a deployment of the 82nd Airborne Division to the Middle East at the end of December forced the modernization team adjust its testing plans. Defender 2020, a massive exercise scheduled to take place in June with European allies, was altered. Army leaders had planned to use the event to test network equipment with allies.
However, network tests are “back on the calendar” in the fourth quarter of fiscal 2020, Winterle said.
“The design decisions that were made at critical design review are still up on the table for revision or reassessing after continual soldier feedback,” Winterle said. “This is a continual evaluation, continual process.”
Maj. Gen. Peter Gallagher, director of the Network CFT, said in a June 9 webinar with industry that several testing events, like a Joint Warfighting Assessment and Defender 2020, were altered, as were combat training center rotations and other exercises.
Those “are always great venues for us getting feedback from soldiers and leaders on improving the network design,” Gallagher said. Ryan said that the network team received feedback from soldiers during the development, build and delivery phases of network design.
In forthcoming testing events, the Army wants to figure out how many radios are needed and where they need to be located, Winterle said. The service also plans to evaluate if it undervalued and overvalued certain capabilities.
6 novembre 2024 | International, Terrestre, C4ISR, Sécurité
INTERPOL dismantles 22,000 cyber threat servers in a global operation, seizing devices and arresting suspects.
21 décembre 2023 | International, Aérospatial
These new aircraft will enable the Spanish Air and Space Force and the Spanish Navy to strengthen the national anti-submarine warfare capability as well as increase and enhance its surveillance,...
9 septembre 2019 | International, Aérospatial
ROCKET CENTER, W.Va. – Sept. 5, 2019 – Northrop Grumman Corporation (NYSE: NOC) has received its first production order from the U.S. Navy to manufacture the FMU-139D/B, a new all-electronic bomb fuze suitable for many general purpose bombs used by the U.S. Department of Defense and its allied nations. With the U.S. Navy's decision this January to authorize full rate production, the improved FMU-139D/B bomb fuze creates a uniform solution for general purpose bombs that increases performance and reliability, while decreasing cost. The FMU-139D/B replaces three legacy bomb fuzes – FMU-139C/B, FMU-152 and most FMU-143s – which were manufactured with technology that relied on mechanical mechanisms to safe and arm each fuze. In contrast, the FMU-139D/B relies on electronics to safe and arm the device, greatly improving its reliability as 100 percent of the fuze's electronic functionality can be tested before the fuze is delivered to the customer. “Increased flexibility and agility will enable the warfighter to cover a broader set of missions,” said Pat Nolan, vice president, missile products, Northrop Grumman. “The FMU-139D/B's all-electronic nature improves affordability. It is easier to manufacture, assemble and test than other legacy fuzes.” Under Northrop Grumman's contract with the U.S. Navy, the FMU-139D/B production orders have the potential to exceed $400 million over the next four years. FMU-139D/B will be used by both the U.S. Navy and the U.S. Air Force, and the Navy Program Office will manage the requirements. The FMU-139D/B will be produced at Northrop Grumman's Allegany Ballistics Laboratory (ABL) facility in Rocket Center, West Virginia. The FMU-139D/B is designed to be a multi-purpose fuze equipped with general purpose characteristics and also serves as a highly survivable fuze for penetrator weapons. This flexibility offers the U.S. Department of Defense and its allied nations a multi-purpose fuze solution. Learn more about the benefits of the FMU-139D/B, Northrop Grumman's new all-electronic fuze, in this video. Northrop Grumman is a leading global security company providing innovative systems, products and solutions in autonomous systems, cyber, C4ISR, space, strike, and logistics and modernization to customers worldwide. Please visit news.northropgrumman.com and follow us on Twitter, @NGCNews, for more information. https://news.northropgrumman.com/news/releases/northrop-grumman-to-manufacture-new-all-electronic-bomb-fuze