30 octobre 2020 | Local, Aérospatial

Boeing would perform Canadian Super Hornet final assembly in US

by Pat Host

Boeing would perform final assembly of its F/A-18 Block III Super Hornets in the United States rather than Canada if it wins Canada's Future Fighter Capability Project (FFCP) competition.

Jim Barnes, Boeing Defense, Space, and Security director of business development in Canada, on 27 October cited the small production run for performing final assembly in St. Louis, Missouri, where the Super Hornet is built. Canada will purchase 88 advanced fighters as part of its competition with the first aircraft anticipated for 2025. The procurement is expected to be worth USD11-14 billion.

“It was decided that the benefits of standing up these types of operations in Canada were not worth the investment,” Barnes said. “We are concentrating on the decades of life cycle support for our partners' work share, including potential work on US Navy Super Hornets.”

Boeing is competing against the Saab Gripen E with production in Canada and the Lockheed Martin F-35A Lightning II Joint Strike Fighter (JSF) for the FFCP. The winning company will replace the Royal Canadian Air Force's (RCAF's) legacy Boeing F/A-18 (CF-18/CF-188 in national service) fighter fleet.

The industrial and technical benefits (ITB) portion of an offeror's bid is an important part of a proposal. Jennifer Seidman, Boeing international strategic partnerships country manager for Canada, said on 27 October that both defence production and skills development were part of the company's ITB proposal, but that she could not provide further details.

https://www.janes.com/defence-news/news-detail/boeing-would-perform-canadian-super-hornet-final-assembly-in-us

Sur le même sujet

  • French firm Dassault pulls out of fighter-jet competition: Sources

    7 novembre 2018 | Local, Aérospatial

    French firm Dassault pulls out of fighter-jet competition: Sources

    By Lee Berthiaume The long effort to replace Canada's aging fighter jets took another surprise twist on Tuesday, as multiple sources revealed that French fighter-jet maker Dassault is pulling out of the multibillion-dollar competition. The decision comes just over a week after the federal government published the military's requirements for a replacement for Canada's CF-18s as well as a draft process by which a winning supplier will be chosen. Dassault had repeatedly pitched its Rafale aircraft to Canada over the years as successive governments in Ottawa have wrestled with selecting a new fighter jet. Dassault's pitch included significant promises, including that it would assemble the planes in Canada. But sources tell The Canadian Press that Dassault's decision to withdraw was related to the fact France is not a member of the Five Eyes intelligence-sharing network, which counts the U.S., Britain, Australia, New Zealand and Canada as members. The five members have very specific requirements for how their equipment works together. The French government, which had been closely working with Dassault as the most recent iteration of Canada's fighter-replacement program has inched along over the past year, was preparing to notify Ottawa of the company's withdrawal. The move leaves four companies — U.S. aerospace giants Lockheed Martin and Boeing, European competitor Airbus and Swedish firm Saab — competing for the $19-billion contract to replace Canada's 76 CF-18s with 88 new fighters. A contract isn't expected to be awarded until 2021 or 2022, with delivery of the first new aircraft slated for 2025. In the meantime, the government is planning to upgrade its CF-18s and buy 25 used fighters from Australia as a stopgap. Dassault faced several significant challenges in meeting Canada's requirements for a new fighter, said defence analyst David Perry of the Canadian Global Affairs Institute, and while they weren't insurmountable, they would have cost time and money. Those challenges included meeting those Five-Eyes intelligence-sharing requirements, which Perry said put Dassault at a distinct disadvantage in the competition when compared to Lockheed Martin, Boeing and, to a certain degree, Airbus. "For any of the non-American companies, solving the Five-Eyes interoperability issues is going to be challenging," he said, noting that the U.S. in particular is very sensitive about data-sharing. "And it costs companies a lot of money to mount and pursue bids. So if they think at this point in time that it's not a realistic prospect, then pulling out is pretty understandable." That could explain why Dassault never established a strong presence in Canada during the many years when it was trying to sell the Rafale as a replacement for the CF-18, he added. The CF-18s are about 35 years old. Canada's attempts to buy a new fighter jet have dragged on for nearly a decade after the previous Conservative government announced in 2010 that Canada would buy 65 F-35s without a competition, with the first to be delivered in 2015. But the Tories pushed the reset button in 2012 after the auditor general raised questions about the program and National Defence revealed the jets would cost $46 billion over their lifetimes. After campaigning on a promise not to buy the F-35s, the Trudeau Liberals announced in November 2016 they would take their time with a competition to replace the CF-18s, and buy 18 "interim" Boeing Super Hornets without a competition because Canada needed more fighter jets badly. But then Boeing's trade dispute with Canadian rival Bombardier saw the Liberals scrap their plan to buy Super Hornets and instead begin talks to buy 18 used fighter jets from Australia. A contract for those used planes is expected in the coming weeks. The formal competition to replace the CF-18s is scheduled to begin next spring. https://www.nationalobserver.com/2018/11/07/news/french-firm-dassault-pulls-out-fighter-jet-competition-sources

  • Héroux-Devtek announces acquisition of Québec-based Alta Précision Inc.

    10 juin 2019 | Local, Aérospatial

    Héroux-Devtek announces acquisition of Québec-based Alta Précision Inc.

    Héroux-Devtek Inc., the world's third-largest landing gear manufacturer, announced that it has concluded the acquisition of all the outstanding shares of Montreal-based Alta Precision Inc., a manufacturer of high-precision landing gear components. The transaction, which is subject to final purchase price adjustments, is valued at $23 million and was funded through the corporation's credit facilities. Héroux-Devtek, with its head office in Longueuil, Que., has 1,960 employees around the world, of which approximately 800 are located in Québec following the acquisition of Alta Precision Inc. Since its inception in 1942, Héroux-Devtek has grown from a small repair and overhaul facility to a world-class supplier of landing gear and actuation systems, delivering on major platforms such as the Boeing 777 and 777X. This acquisition, along with those of CESA, Beaver and Tekalia announced over the last year, strengthen its leadership position around the world. “The acquisition of Alta Precision Inc. expands our portfolio of commercial products by providing both access to new programs and additional content on existing platforms. It also comes with the backlog and manufacturing capacity necessary to grow the existing business”, said Martin Brassard, president & CEO of Héroux-Devtek. “We would like to welcome the Alta Precision Inc. employees and its president Guillermo Alonso who will join the growing Héroux-Devtek team. Together, we are confident in our ability to add value to Alta Precision Inc.'s operations and meet growing demand for our world-class landing gear offering”, added Brassard. “We are delighted to join Héroux-Devtek, a leading landing gear manufacturer for the global aerospace industry. With its growing customer base in North America and Europe, we will play a strong role in accelerating the growth of the corporation,” said Alonso, president of Alta Precision Inc. Founded in 1980, Alta Precision Inc. is a privately owned company which operates a state-of-the-art 72,000 square foot facility located in Montreal, Que. The company has approximately $18 million in annual revenues and employs 110 highly skilled personnel. Alta Precision Inc. manufactures complex landing gear components and assemblies for large customers such as Embraer, Safran, Liebherr and the United States Air Force. Alta Precision's strong backlog is comprised mainly of commercial aircraft landing gear components for the new E-2 and Airbus A-220 programs and for the Boeing 787 and Airbus A-350, two recent and growing commercial platforms. https://www.skiesmag.com/press-releases/heroux-devtek-announces-acquisition-of-quebec-based-alta-precision-inc/

  • Military to look at cutting capabilities, using public servants to handle more jobs, says directive from top general and deputy minister

    30 juin 2022 | Local, Aérospatial, Naval, Terrestre, C4ISR, Sécurité

    Military to look at cutting capabilities, using public servants to handle more jobs, says directive from top general and deputy minister

    The Canadian Forces will get rid of some capabilities as well as examine having public servants and contractors take on roles now handled by military…

Toutes les nouvelles