Back to news

April 8, 2020 | International, Aerospace, Naval, Land, C4ISR, Security

The Pentagon’s supply chain faces an economy under siege

By: and

WASHINGTON — On the morning of April 2, companies up and down the Pentagon's supply chain got an email from Eaton Aerospace, a mid-tier supplier that provides parts such as fuel pumps and hydraulics to defense primes for aircraft like the KC-46 tanker and F-35 Joint Strike Fighter.

“The truly unprecedented situation with [the coronavirus] COVID-19 is jointly affecting our business, families and communities we live in,” said one such email, which was obtained by Defense News. “While the health and safety of our employees and those of our supply partners remains paramount, our industry is significantly impacted. ... As a result, our Eaton Grand Rapids, [Michigan], plant will [be] closed starting April 4, 2020 and will reopen on April 13, 2020."

Similar emails for other locations followed.

In a statement, Eaton Corp. spokeswoman Margaret Hagan acknowledged that the company was temporarily implementing closures “at a few sites,” but maintained that there would be no impact to the “critical support” provided to the U.S. military.

“We've made the important decision to maintain operations during the COVID-19 crisis because Eaton products are critical to our global infrastructure,” she said. “As a strategic supplier of aerospace fuel, hydraulic, motion control, electrical and engine solutions for the aerospace and defense sector globally, Eaton's aerospace products and support services are vital not only to the military, but to the transport of passengers and goods around the world.”

Although perhaps not a household name in the defense sector, Eaton is far from a small business, bringing in more than $21 billion in sales in 2019. However, the quiet closure of its production lines illustrates how widespread the impacts of COVID-19 have reached — past the major prime contractors like Boeing, or even its major subcontractors like Spirit AeroSystems, and to the large and small companies that populate the middle and lower tiers of its supply chain.

“The whole supply chain is a mess right now,” said an employee of one electronics manufacturer that provides components for both commercial and defense products. The source, whose name and company affiliation Defense News is withholding to protect the individual from reprisal, described challenges with working from home and retaining workers on the production line. Some colleagues, the source said, are choosing to take paid leave or voluntary layoffs rather than risk exposure to COVID-19.

“We are at 20 percent capability,” the source said.

According to Jeremy Bash, a former Pentagon official now with Beacon Global, “there is deep concern among industry and department leaders that the second- and third-tier suppliers need to be protected."

“There's a sense DoD [the Department of Defense] needs better visibility into the supply chain, mapping out how a part makes its way into a plane or ship," Bash added. “There is a growing number of tech companies providing software to illuminate supply chains, and since COVID, the phones of those companies have been ringing off the hook because the department now realizes supply chain concentration is a huge risk.”

ndustrial shock waves

But one doesn't have to dive down the supply chain toward Eaton to see that the defense market is taking a beating, particularly the companies that also have a strong exposure to the commercial market.

Up until last month, financial analysts would have seen commercial sales as a major boon to the overall health of a defense supplier, but that has changed, as the economy has taken a nosedive, said Richard Aboulafia, a defense and aerospace analyst with the Teal Group.

“The commercial market is under siege, which means of course there is excess inventory, slumping revenue, major challenges on many levels,” he said. "On top of that, everybody faces the immediate impact of social distancing and workforce concerns. And on top of that, if you're heavily exposed to commercial, the harder time you might have getting credit. All of these are big issues.

"The defense-industrial base, if it could somehow be removed from commercial aviation, we'd be in pretty good shape by the standards of the world economy. But we can't. They're intertwined.”

Bloomberg reported Monday that Airbus sent a letter to employees over the weekend, warning that gaps in the supply chain, among other issues, will impact the company's ability to resume normal operations.

Also on Monday, simulation firm CAE announced it was temporarily laying off 2,600 of its 10,500 global employees, while placing another 900 employees on a reduced work week. The company also instituted salary freezes and reductions for remaining staff, ranging from 50 percent for the CEO and executive team down to 10 percent for regular employees. Roughly 40 percent of CAE's overall revenue comes from defense contracts, according to the Defense News Top 100 list.

Boeing, meanwhile, extended a shutdown of its Puget Sound, Washington, facilities, while also stopping work at its rotorcraft production line in Philadelphia, Pennsylvania. As a result of the Puget Sound shutdown, Spirit AeroSystems announced last week that it is halting work at a number of locations.

Small businesses that form a core of the Pentagon's future technological development may be particularly vulnerable, according to government data and analytics firm Govini. In a new data sheet, the company noted there are roughly 50,000 small businesses that provide innovation support for the DoD, all of which is vulnerable to economic upheaval.

“If this ecosystem suffers widespread failure due to COVID-19, the resulting impact will stretch well beyond short-term disruptions,” Govini said. “These vendors are not just critical links in the DoD supply chain important for immediate purposes. They are also vital for the development of both next-generation systems in the midterm and revolutionary capabilities that will shape the competitive landscape for decades into the future.”

Between fiscal 2015 and fiscal 2019, roughly 28 percent of defense spending on underwater unmanned vehicles — a key part of the U.S. Navy's plan to build a fleet of the future — went to small businesses, according to Govini numbers. Small business contracts also accounted for 30 percent of the DoD's research on artificial intelligence during that same time period.

Martijn Rasser, a senior fellow at the Center for a New American Security, warned Defense News last month that “for small business, a shutdown would be extremely difficult to get through because even with bailouts and economic stimulus, once those businesses close up, its really hard to get those started again.”

“If an airline goes out of business, the planes don't disappear — you can start over. If it's a highly specialized manufacturing company, those employees are going to disperse and try to find other work. So I think that's something to be very cognizant of because of all the consolidation in the defense industry,” he added. “If they have to curtail operations for an extended period of time, it's extremely difficult to get it going again.”

What's the Pentagon's response?

Starting March 20, the Pentagon began issuing guidance on how to support industry. But a three-day span last week showed how those efforts remain a moving target, particularly in relation to the smallest suppliers.

On March 30, the department's acting director of defense pricing and contracting, Kim Herrington, issued guidance to contracting officers that essentially said industry should not be penalized for missing performance targets as a result of the ongoing pandemic.

“We must do our utmost to ensure that both the Department and the vital industrial base that support us remain healthy for the duration of this emergency and emerge as strong as ever from the challenges of this pandemic,” Herrington wrote.

But some in Congress feel the department is still not doing enough to clarify policy changes for contracting officers and defense companies. On April 1, a group of Ohio lawmakers wrote to Defense Secretary Mark Esper and Under Secretary of Defense for Acquisition and Sustainment Ellen Lord, warning that “we are concerned that guidance to the defense contractor workforce remains ambiguous and lacks uniformity in application,” particularly in terms of communication from department contracting officers to small companies.

Over the past several years, the Pentagon has worked to delegate decision-making authorities to low-level contracting officers. But while that may work to empower contracting officers to find creative solutions to problems under normal circumstances, during a pandemic, these officials are ill-prepared to decipher “uncertain, often conflicting guidance,” the lawmakers said.

The lawmakers asked that contracting officers be directed to ensure that contractors are allowed to work remotely to the maximum extent possible; that contractors be given “maximum flexibility to meet their contractual obligations”; that efforts be made to not have “avoidable reductions” in the workforce; and that companies involved in research and development work be clearly labeled as essential personnel.

And on April 2, two trade groups — the National Defense Industrial Association and the Professional Services Council — asked Congress to instate a six-month delay for a legal requirement included in the 2019 National Defense Authorization Act that prohibits the government from doing business with companies that work with vendors Huawei and ZTE.

That language “will impose significant financial and operational costs on medium- and small-sized firms at a moment of substantial uncertainty and hardship,” at a time when they are dealing with the economic impact of the coronavirus pandemic, the letter stated.

Later in the day, the DoD released a statement providing clarification on previous announcements.

The department confirmed that higher progress payment rates — which had been jumped the previous week — will apply to already completed work, and not just future production. The new cash-flow rules should result in more than $3 billion in new cash moving into industry, according to department estimates. But that prediction came with a warning: The Pentagon “has high expectations that that prime companies are ensuring cash flow is moving to small businesses in their respective supply chains who need it most.”

So far, the Defense Contract Management Agency has modified approximately 1,400 contracts with increased rates, the announcement noted. Contracting officials are working to ensure invoices at the higher progress payment rate keep arriving on time, with the department claiming there have been “no reported delays on contractor submitted invoices.”

The announcement also stated that any delay related to COVID-19 issues will result in “an equitable adjustment of the contract schedule and cost,” meaning the department will adjust the contracts so that the vendor does not take an economic hit.

The steps taken by the department are important, said Bash, the former Pentagon official. “The most powerful force the government can bring to help these companies is to say to industry: ‘We have money,' ” he said.

A wildcard, Bash noted, is the $17 billion in national security-focused funding made available under the most recent stimulus package passed by Congress.

However, Byron Callan, an industry analyst with Capital Alpha Partners, warns that more money doesn't necessarily mean less problems.

“The DoD faces the same issues as any other branch of the government or the Fed that is providing more cash to address the crisis — if people aren't at work because of COVID-19, that cash won't help much in keeping a factory or office open and all projects on schedule," Callan said.

For Aboulafia, increasing the value of progress payments is a good first step for increasing the flow of cash to suppliers.

“In times like this, it really is about access to cash because of the risk of credit markets freezing up for commercial companies. Accelerated payments, maybe loan guarantees should be considered," Aboulafia said.

But he's realistic that the defense industry isn't the only issue on the table for the Trump administration.

“I think there's a lot that government can do,” Aboulafia said. "Unfortunately there's a lot that government has to do because the entire economy has been put into a medically induced coma.”

https://www.defensenews.com/coronavirus/2020/04/08/the-pentagons-supply-chain-faces-an-economy-under-siege

On the same subject

  • The defense industry remains in dire straits. Congress must pass another relief package.

    August 19, 2020 | International, Aerospace, Naval, Land, C4ISR, Security

    The defense industry remains in dire straits. Congress must pass another relief package.

    By: Mackenzie Eaglen House Armed Services Committee Chairman Adam Smith, D-Wash., and Sen. Dick Durbin, D-Ill., ranking member of the Senate Appropriations Subcommittee on Defense, recently wrote in an op-ed on Defense News that Congress “cannot panic and hand out blank checks to defense contractors.” They were concerned with a “lack of detail” in the Pentagon's stimulus funding request. Pentagon officials have responded with said requested detail. It's clear the defense, shipbuilding and aerospace industrial base — an “essential” workforce as designated by the Department of Homeland Security — is indeed in need of help. These critical firms need financial support to the tune of about $11 billion to support more than 100,000 direct jobs. Nor should the military have to take it out of hide, as suggested by some. According to the Defense Department, the data from industry is showing 30-40 percent inefficiency across the defense industrial base, but certain sectors like shipbuilding are experiencing 50-60 percent inefficiency. At shipyards, for example, blue-collar worker attendance ranges from just half to 70 percent. Other short-term sectors at risk include textile manufacturers, body armor suppliers and small business electronics suppliers, who feed guidance systems and wiring harnesses in Army vehicles and aircraft. A sampling of specific reasons for inefficiency include: Confirmed cases or quarantines Government facility closure/standdown test delays Telework Closures due to travel restrictions Logistic implications caused by travel restrictions requiring commercial freight Availability of parts and supplies High absentee rates Local and state lockdowns Foreign government lockdowns Supplier shutdowns Pentagon leaders are worried about the near term, but also permanent damage. Officials are “concerned with a potential loss of critical labor skills,” such as welders. Shipbuilders are in dire straits given the “significant touch labor” required to build a ship and “greater facility impact from social distancing.” The potential shutdown of one of the “big seven” private shipyards is a real risk right now. The Virginia-class attack submarine is currently experiencing delays in its production line, as Newport News Shipbuilding has “prioritized its available workforce on supporting maintenance for in-service submarines and aircraft carriers.” If electricians, engineers and solderers shift from the Virginia assembly line elsewhere, the work is slowed and “the opportunity for the cost to come down on each successive submarine hull is diminished.” Congress has repeatedly supported this program above recent budget requests and presumably cares greatly about this unanticipated cost overrun through no fault of nor negligence by the contractor. The Air Force is experiencing major program delays due to the impact on the aerospace industrial base — both primes and suppliers. Programs impacted include the F-35 Joint Strike Fighter and KC-46 tanker due to facility shutdowns in the U.S., England, Italy and Japan. These two aircraft programs will likely miss major milestones — therefore delaying the time when they become available to the war fighter. Aircraft engine-maker GE Aviation is a “fragility concern” across the armed forces. For the Air Force, the Joint Air-to-Surface Standoff Missile and the Advanced Medium-Range Air-to-Air Missile are “being impacted by reduced workforce and facility availability.” The Small Diameter Bomb motor supplier is being pulled to support the Federal Emergency Management Agency with motors for hospital beds. Aerospace firms with commercial work are reporting problems given the massive decline in commercial demand, which affects defense. Contrary to the assertion that the Pentagon doesn't need more stimulus money to support contractors, the services are “concerned about large commercial companies, like Boeing and GE that are critical to our defense industrial base facing negative cash flow and other associated impacts from COVID-19.” Small businesses and subcontractors are particularly vulnerable as they have far less slack to respond to crises. Many live contract to contract, as indicated by a 2018 Pentagon report. According to the Defense Department, “small businesses ... have been the hit the hardest due to unfamiliarity that [the] defense industrial base is exempt from most local shelter-in-place orders.” The Pentagon's request for more stimulus money is not a case of pork for primes. This industry has “a notably high rate of subcontracted work flow and systems with high component volumes, driving job loss directly to program partners and the supply chain.” So while virtually all of the Pentagon's missiles are built by two primes, 98 percent of the subcontractors making parts for U.S. munitions are the only source for these items. If these unique businesses fail, there may not be any replacements. A study last year by George Mason University found “contractor workforce challenges have a direct impact on the government's ability to ramp up quickly.” Budget fluctuations are particularly hard on small companies that “do not have large enough portfolios to shift people between projects. The contractor workforce loses skills or move on.” These firms operate with “thin margins and low lines of credit.” The additional costs to respond to COVID-19 were not part of the original contracts the companies are currently performing, and warrant stimulus money. Hopefully, Chairman Smith and Sen. Durbin now agree. https://www.defensenews.com/opinion/commentary/2020/08/18/the-defense-industry-remains-in-dire-straits-congress-must-pass-another-relief-package/

  • Elbit Systems Awarded Contract Worth Approximately $102 Million to Supply ATMOS Artillery Systems to an International Customer

    April 19, 2023 | International, Land

    Elbit Systems Awarded Contract Worth Approximately $102 Million to Supply ATMOS Artillery Systems to an International Customer

    Under the contract Elbit Systems will supply a battalion?s worth of ATMOS (Autonomous Truck Mounted Howitzer) 155mm/52 caliber truck-mounted howitzers systems.

  • Contract Awards by US Department of Defense - January 16, 2020

    January 17, 2020 | International, Aerospace, Naval, Land, C4ISR, Security

    Contract Awards by US Department of Defense - January 16, 2020

    AIR FORCE Raytheon Co., Marlborough, Massachusetts, is awarded a $442,265,464 cost-plus-incentive-fee undefinitized contract action for the force element terminal (FET) development effort. This contract provides for the design, development, testing, integration, and logistical support of a FET system that will transition the B-52 and RC-135 hardened communication terminals from the Military Strategic Tactical Relay satellite communications satellite constellation to the Advanced Extremely High Frequency satellite constellation. The majority of the work will be performed at Raytheon's facilities in Marlborough, Massachusetts; and Largo, Florida, and is expected to be completed by August 2023. This award is the result of a sole-source acquisition. Fiscal 2019 and 2020 research, development, test and evaluation 3600 funds, in the amount of $5,812,581, are being obligated at the time of contract award. The Air Force Life Cycle Management Center, Hanscom Air Force Base, Bedford, Massachusetts, is the contracting activity (FA8735-20-C-0003). Raytheon Co., Marlborough, Massachusetts, has been awarded a $36,848,806 cost-plus-fixed-fee contract modification (P00152) for the software encryption platform (SEP) engineering change effort, under the Family of Advanced Beyond Line-of-Sight Terminals (FAB-T) production contract. The contract action will develop and deliver an updated National Security Agency approved SEP. Work will be performed at Marlborough, Massachusetts, and is expected to be completed by March 2023. This award is the result of a sole source acquisition. Fiscal 2019 research, development, test and evaluation funding in the amount of $1,000,000 is being obligated at the time of award. The FAB-T Contracting Office, Hanscom Air Force Base, Massachusetts, is the contracting activity (FA8705-13-C-0005). ARMY LOC Performance Products,* Plymouth, Michigan, was awarded a $41,439,129 firm-fixed-price contract for the procurement of manufactured T-161 double pin track which is comprised of molded track pads, rubberized pins and forged track shoe bodies with bonded rubber backings to be used on the Army's Bradley family of vehicles, armored multi-purpose vehicle and Paladin family of vehicles. Bids were solicited via the internet with two received. Work will be performed in Plymouth, Michigan, with an estimated completion date of Jan. 12, 2022. Fiscal 2020 other procurement, Army funds in the amount of $41,439,129 were obligated at the time of the award. U.S. Army Contracting Command, Warren, Michigan, is the contracting activity (W56HZV-20-C-0052). Lockheed Martin Corp., Orlando, Florida, was awarded a $9,829,327 modification (P00013) to contract W31P4Q-19-C-0071 for engineering services in support of the Hellfire Missile and Joint Air-to-Ground Missile. Work will be performed in Orlando, Florida, with an estimated completion date of Jan. 15, 2021. Fiscal 2020 missile procurement, Army funds in the amount of $9,829,327 were obligated at the time of the award. U.S. Army Contracting Command, Redstone Arsenal, Alabama, is the contracting activity. DEFENSE LOGISTICS AGENCY Carter Enterprises,** Brooklyn, New York, has been awarded a maximum $21,105,765 firm-fixed-price, indefinite-quantity contract for coats and trousers. This was a competitive acquisition with six responses received. This is a one-year base contract with three one-year option periods. Location of performance is New York, with a Jan. 15, 2021, performance completion date. Using military services are Army and Air Force. Type of appropriation is fiscal 2020 through 2021 defense working capital funds. The contracting activity is the Defense Logistics Agency Troop Support, Philadelphia, Pennsylvania (SPE1C1-20-D-1206). NAVY Crowley Government Services, Jacksonville, Florida (N62387-15-C-2505), is awarded a $20,771,542 firm-fixed-price contract with reimbursable elements extension by invoking Federal Acquisition Regulation (FAR) 52.217-8 “option to extend services” to continue the operation and maintenance of five Tactical Auxiliary General Ocean Surveillance (T-AGOS) vessels; and two missile range instrumentation ships (T-AGM). This option includes a 365-day base period of performance, four one-year option periods, and a Federal Acquisition Regulation (FAR) 52.217-8 “option to extend services” option period for up to six months, which, if exercised, would bring the cumulative value of this contract to $375,202,948. Work will be performed at sea worldwide and is expected to be completed by July 21, 2020. Fiscal 2020 Navy operations and maintenance funds in the amount of $20,771,542 will be awarded at time of award and will expire at the end of fiscal year. This contract extension was not competitively procured. The contract was prepared under the provisions of 10 U.S. Code § 2304(c)(1), as implemented by FAR 6.302-1(a)(2)(iii) (only one responsible source and no other supplies or services will satisfy agency requirements). The Military Sealift Command, Norfolk, Virginia, is the contracting activity (N62387-15-C-2505). MAC LLC, Bay St. Louis, Mississippi, is awarded a $9,998,493 firm-fixed-price, indefinite-delivery/indefinite-quantity contract for the purchase of up to a maximum of 2,400,000 MK323 Mod 0 polymer cased .50 caliber linked cartridges, and .50 caliber armor piercing/armor piercing incendiary polymer cased linked cartridges. Work will be performed in Bay St. Louis, Mississippi, and is expected to be completed by January 2024. Fiscal 2019 procurement ammunition (Marine Corps) funds in the amount of $3,051,359 will be obligated on the first delivery order immediately following contract award and funds will expire the end of fiscal 2021. The contract was awarded on a sole source basis in accordance with Federal Acquisition Regulation 6.302-1.The Marine Corps Systems Command, Quantico, Virginia, is the contracting activity (M67854-20-D-5200). *Small Business **Small Business in Historically Underutilized Business Zone https://www.defense.gov/Newsroom/Contracts/Contract/Article/2059429/source/GovDelivery/

All news