Back to news

July 24, 2020 | International, Naval

Shipyard suspends welding on future carrier John F. Kennedy after small fire

By:

WASHINGTON — A small fire aboard the U.S. Navy's next Ford-class carrier John F. Kennedy has prompted builder Newport News Shipbuilding to shut down all welding this week as the shipyard investigates, according to a statement from Huntington Ingalls Industries, its parent company.

The fire broke out around 10:15 a.m. on Monday and was quickly extinguished by emergency crews, the statement read, resulting in no injuries.

Newport News Shipbuilding is investigating the cause of this incident,” the statement from HII spokesman Duane Bourne read. “There are no known cost or schedule impacts at this time.

“Newport News Shipbuilding secured all hot work on CVN 79 while the cause of the fire is being investigated and a yard-wide stand down was conducted for fire safety. The Navy and Newport News Shipbuilding will restore hot work on CVN 79 once the investigation is complete and any necessary corrective actions are in place.”

Fire safety has been an area of intense focus for the ship repair and shipbuilding industry since last week's fire on the amphibious assault ship Bonhomme Richard. The fire damaged 11 of 14 decks and gutted the ship's island superstructure, according to a letter from the chief of naval operations obtained by Defense News.

https://www.defensenews.com/naval/2020/07/23/welding-suspended-on-future-carrier-john-f-kennedy-after-small-fire/

On the same subject

  • 2019 was a landmark year for Connecticut’s defense industry

    October 19, 2020 | International, Naval

    2019 was a landmark year for Connecticut’s defense industry

    Julia Bergman Military contractors in Connecticut had their most lucrative year in more than a decade in 2019, receiving $37.1 billion in defense contracts last year. That's according to the State of Connecticut Office of Military Affairs, which has tracked contracts received by the state's defense industry since 2007 and releases an annual report on the outlook for the industry. In reality, the value of defense contracts awarded in 2019 to Connecticut companies or companies doing business in the state was likely higher than $37.1 billion, as the report only relies on prime contracts worth $7 million or more. The previous high was in 2014, when the report recorded $27.1 billion in contracts. The growth in 2019 was spurred by the $22.2 billion contract the U.S. Navy awarded to Electric Boat last December for the construction of nine Virginia-class attack submarines — the largest shipbuilding contract ever awarded by the Navy. The contract includes the option to purchase a 10th submarine, which would increase its value to $24.1 billion. In addition to the record-breaking contract, Congress passed a defense budget that resulted in $30 billion for Connecticut-based defense programs this fiscal year, including the purchase of helicopters, jet engines and submarines all manufactured in the state. Defense contractors, deemed essential businesses during the coronavirus pandemic, have continued to fare well, similar to what happend during the 2008-09 recession, said Bob Ross, executive director of the Office of Military Affairs. At the time, Connecticut firms with both defense and commercial arms saw their commercial business lag but were kept busy by their military contracts. "We're seeing some of that again," Ross said. "For example, commercial aviation has been struck by the (coronavirus) pandemic, but the military aviation side has kept going." In the past three years, the growth in defense contracts has mainly been related to submarine construction at EB and jet engine manufacturing at Pratt & Whitney. "Suppliers have been busier than ever, particularly for submarines," the report says. "Such high level of defense production will likely be the case for many years to come, as Connecticut continues to produce and maintain the world's most sophisticated nuclear submarines, state of-the-art military jet engines, and a variety of military rotary wingaircraft used worldwide." https://www.theday.com/military-news/20201016/2019-was-landmark-year-for-connecticuts-defense-industry

  • India gives initial nod to buy French Rafale jets, submarines

    July 13, 2023 | International, Aerospace

    India gives initial nod to buy French Rafale jets, submarines

    India's defence ministry has given initial approval to purchase 26 Rafale fighter jets for its navy and three Scorpene class submarines, ahead of Prime Minister Narendra Modi's arrival in France, Defence Minister Rajnath Singh said.

  • Space Development Agency wants someone to launch its first 28 satellites

    October 9, 2020 | International, C4ISR, Security

    Space Development Agency wants someone to launch its first 28 satellites

    Nathan Strout WASHINGTON — Now that the Space Development Agency has selected four contractors to build its first 28 satellites, the organization is looking for a launch provider to ferry them into orbit. According to a solicitation posted Oct. 6, the agency plans to select one company to provide launch services for all 28 satellites, with the first launch taking place in September 2022. Those 28 satellites will comprise tranche 0 of SDA's National Defense Space Architecture, a new proliferated constellation providing a whole host of services primarily from low Earth orbit. Among other things, the NDSA is anticipated to provide beyond-line-of-site targeting, hypersonic missile warning and tracking, and a space-based mesh network that will connect all of the services as part of the Pentagon's new Combined Joint All-Domain Command and Control (CJADC2) approach. The constellation will ultimately include hundreds of satellites, but SDA isn't putting them all up at once. Rather, the agency has adopted a spiral development approach, where the most mature and ready technology is added to the constellation in two year tranches. This launch solicitation covers the first tranche, otherwise known as tranche 0. Slated to go into orbit in fall 2022, tranche 0 is what SDA calls its “war fighter immersion tranche.” “Its goal is to provide the data in a format that the war fighters are used to seeing on tactical timelines that they can be expected to see once we actually become operational,” SDA Director Derek Tournear told C4ISRNET. “The whole purpose of tranche 0 is to allow the war fighters to start to train and develop tactics, techniques and procedures so that they can create operational plans for a battle where they would actually incorporate these data.” With just 28 satellites, tranche 0 will not provide global, persistent coverage. Instead, it will provide periodic, regional capabilities. Tranche 0 will feature the inaugural satellites in the transport and tracking layers. The 20 transport layer satellites will form the base of a space-based mesh network, passing data from satellites to weapon systems along a high-speed, on-orbit corridor. Tournear has previously stated that the transport layer will serve as the space component of CJADC2, the Pentagon's effort to connect sensors to shooters across domains and services. The inaugural tracking layer will be made up of eight satellites. The tracking layer will be used to detect and track hypersonic threats, working with the transport layer to pass tracking data and custody from satellite to satellite—collaborating to keep an eye on globe-traversing missiles that can evade current missile warning capabilities. SDA has selected Lockheed Martin and York Space Systems to each build 10 of the transport layer satellites, while SpaceX and L3 Harris will split the eight tracking layer satellites. Because the SDA has given vendors flexibility in the designs of their satellites, there is some variety to the weight of the space vehicles being launched into orbit. While all 20 transport layer satellites will weigh approximately 200 kilograms, give or take 20 kilograms, there is a significant difference in the size of the eight tracking layer satellites. One vendor—either SpaceX or L3 Harris—will be contributing four tracking layer space vehicles weighing approximately 1,068 kg each. The other vendor's space vehicles will be significantly lighter at just 249 kg. In total, SDA is looking to put as much as 10,164 kg of hardware into orbit. The agency wants all 28 satellites delivered to two circular, 950 km near-polar orbits, with the tranche divided evenly into two planes of 14 satellites. The launch provider has until March 31, 2023, to put all payloads on orbit and has discretion as to how many launches it will use to do that. The goal is to have as many satellites up as close to September 2022 as possible. Proposals are due by Nov. 5 at 4 p.m. EST. https://www.c4isrnet.com/battlefield-tech/space/2020/10/08/space-development-agency-wants-someone-to-launch-their-first-28-satellites/

All news