Back to news

January 27, 2020 | International, Aerospace, Naval, Land, C4ISR, Security

Lockheed adds Dunford, former top US military officer, to board

By: Aaron Mehta

WASHINGTON — Lockheed Martin has added Joe Dunford, the former chairman of the Joint Chiefs of Staff, to its board of directors, the company announced Friday.

Dunford, the Marine general who retired out of service at the end of September 2019, will become the 12th member of Lockheed's board come Feb. 10 of this year. He will serve on the board's Classified Business and Security Committee as well as its Nominating and Corporate Governance Committee.

"General Dunford's service to the nation at the highest levels of military leadership will bring valuable insight to our board," Marillyn Hewson, chairman, president and CEO of Lockheed Martin, said in a statement. "His experience in complex, global operations and risk management, including cybersecurity threats, is a tremendous asset and will enhance board oversight in key business areas."

Lockheed Martin is the world's largest defense contractor, with $50.5 billion in defense revenue in fiscal 2018.

The announcement may spur renewed calls by good government groups to close the so-called “revolving door” between the Pentagon and the defense industry, an issue that has taken on new life given the number of industry executives who have joined the defense department under President Donald Trump.

That list is most prominently headlined by Secretary of Defense Mark Esper, a former Raytheon executive, and Pat Shanahan, a Boeing executive who was confirmed as deputy secretary of defense and then served six months as the acting secretary to start 2019 before departing the building. Sen. Elizabeth Warren, a top nominee for the Democratic nomination for president, has called for a ban on defense primes hiring senior Pentagon officials and officers for four years after they leave retire.

https://www.defensenews.com/industry/2020/01/25/lockheed-adds-dunford-former-top-us-military-officer-to-board

On the same subject

  • US Army wants help with radios that integrate with augmented reality

    October 2, 2020 | International, Land, C4ISR

    US Army wants help with radios that integrate with augmented reality

    Andrew Eversden ASHINGTON — The U.S. Army wants to know if there are additional radio vendors that can compete on an integration effort involving the service's Integrated Visual Augmentation System, or IVAS. According to a request for information posted last week, the Army's Program Executive Office Command, Control, Communications-Tactical is seeking single-channel data radios that can “support and integrate” with IVAS. The IVAS program, led by the Soldier Lethality Cross-Functional Team, provides soldiers with artificial intelligence-enhanced goggles that assist with navigation, targeting, and advanced night and thermal vision. The current vendors are Silvus and Domo Tactical Communications. The RFI states that the Army will need about 100,000 radios, with procurement starting in the first quarter of fiscal 2022 and delivered to soldiers beginning in June 2022. Paul Mehney, communications director for PEO C3T, said there will be multiple awards. “We believe that the technology has matured in the commercial space and we believe that there's additional vendors that can compete. We've also, through the soldier touchpoints, learned about how these radios are going to be potentially used and in what configuration they'll be used,” Mehney told C4ISRNET. “Initially these radios were intended only to be at the squad level to form a squad network. Now we believe that we can bring that up to the platoon level because the waveforms and the radios themselves have matured in the commercial sector to allow us to bring more nodes into the network, and we may even take a look at bringing them up to the company level as well.” The single-channel data radios, working with IVAS, will provide a small form-factor solution to transport Tactical Assault Kit data between dismounted soldiers to increase situational awareness. Responses are due Oct. 7. https://www.c4isrnet.com/battlefield-tech/it-networks/2020/10/01/us-army-seeks-market-research-for-radios-to-integrate-with-augmented-reality/

  • Boeing awarded $9.8B contract for Saudi F-15 support

    November 12, 2020 | International, Aerospace

    Boeing awarded $9.8B contract for Saudi F-15 support

    By Ed Adamczyk Nov. 11 (UPI) -- Boeing Co. was awarded a $9.8 billion contract to support F-15 fighter planes of the Royal Saudi Air Force, the U.S. Defense Department announced. The deal covers modernization and sustainment of the Saudi fleet of nearly 130 aircraft over the next five years, the Pentagon said on Tuesday. The package of upgrades includes hardware, software, interface design, development, integration, test, installation of future modifications and enhancements to the F-15 Saudi weapon system. The contract also includes an option for an additional five years beyond the inital November 2025 time period. The F-15 was first put into service as a tactical fighter plane in 1978, and is in use by the air forces of the United States, Japan, Israel, Singapore and Qatar. The newest aircraft of the Royal Saudi Air Force are the F-15SA variant, which come with wing-mounted weapons-carrying packages allowing the plane to carry and launch a wider array of new weapons configurations. The Advanced Missile and Bomb Ejection Racks, or AMBER, allow the plane to carry up to 22 AIM-120 missiles, nearly double the capability of previous F-15s. The F-15QA variant to be used by the Qatar Emiri Air Force, regarded as the most advanced current version of the plane, is based on the Saudi design. Earlier this week, the Pentagon awarded two contracts totaling $734.8 million for infrastructure and equipment for the QEAF. The larger of the two deals is a $657.2 million contract for parts and training for Qatar's F-15 program, beginning with the arrival of the first F-15QAs in 2021. https://www.upi.com/Defense-News/2020/11/11/Boeing-awarded-98B-contract-for-Saudi-F-15-support/2971605119323/

  • Infantry Squad Vehicle is a cramped ride, but US Army says it meets requirements

    January 26, 2021 | International, Land

    Infantry Squad Vehicle is a cramped ride, but US Army says it meets requirements

    By: Jen Judson WASHINGTON — The U.S. Army's new Infantry Squad Vehicle is a cramped ride and offers limited protection from certain threats, according to a recent report from the Pentagon's chief weapons tester, but it still meets the service's requirements in tests and evaluations, the product lead told Defense News. The ISV “key requirements are being met and we are increasing soldier operational readiness by providing an operationally relevant vehicle that can transport small tactical units to a dismount point faster and in better physical and mental condition for the fight,” said Steven Herrick, the Army's product lead for ground mobility vehicles within the Program Executive Office Combat Support and Combat Service Support. The vehicle was designed for easy transport to operational environments with the infantry's current rotary and fixed-wing transport platforms. The key performance parameters required that the vehicle's weight not exceed 5,000 pounds and that it fit inside a CH-47 Chinook cargo helicopter. Those requirements “force dimensional requirements only allowing the vehicle to be a certain height, width and length,” he said. The requirements led to a vehicle that makes it hard for soldiers with all their gear needed for a 72-hour mission to comfortably fit inside and be able to access rucksacks on the move. The Army assessed three vendors in developmental testing from December 2019 through January 2020. The service chose General Motors Defense to supply the vehicle to the force, with the company beating out an Oshkosh Defense and Flyer Defense team as well as an SAIC and Polaris team. All offerings were capable of carrying a nine-soldier infantry squad with weapons and equipment during movement, the director of operational test and evaluation said in the report. But the Pentagon also noted the ISV “has not demonstrated the capability to carry the required mission equipment, supplies and water for a unit to sustain itself to cover a range of 300 miles within a 72-hour period.” The Army, however, has assessed the ISV requirement and solution set is in alignment, Herrick said. The DOT&E report, he said, “indicates a desire to include more equipment than a standard nine-soldier squad would carry on a 72-hour mission.” This lack of space, the report stated, “may create a logistics and operational burden” and might limit the type of missions and duration for ISVs. The soldiers that participated in the touch point evaluating the vehicles were asked to bring their Advanced Combat Helmet and Improved Outer Tactical Vest with plates; individual weapon; night vision devices; and ruck with three days' worth of supplies, Herrick said. “All vendors' ISVs are cramped and soldiers cannot reach, stow, and secure equipment as needed, degrading and slowing mission operations,” the report explained. During tests “soldiers on all ISVs could not readily access items in their rucksacks without stopping the movement, dismounting, and removing their rucksacks from the vehicle.” The soldier touch point took into account soldier comfort, visibility and ability to execute the mission, Herrick said. This was all factored into the Army's decision to choose GM Defense's vehicle. “Additionally, no current or planned combat or tactical vehicle allows access to rucksacks while moving to support operator safety,” Herrick noted. “Crew spaces on the ISV are designed to allow mission performance of specific duty tasks.” Units also lacked reliable communication capability, according to the report, using hand-held or manpack radios between 62 and 300 miles. The ISV does not have a mounted radio requirement. “Communication between the squad leader, soldiers, and the platoon leader was intermittent and not reliable,” the report found. Because of the concept of the ISV providing an effective aid to insert soldiers into combat operations, the requirements support just what the soldier carries, so there is no mounted requirement yet, Herrick said. That requirement could be added as a growth capability later. The DOT&E report also noted that the ISV doesn't have an underbody and ballistic survivability requirement, which could mean the unit would be susceptible to certain threats, but the ISV's speed as well as its small, low profile might help deal with those issues. Adding protection to the vehicle would sacrifice the speed the squad needs to rapidly inject itself into operations. Overall, GM Defense's vehicle had the highest reliability among the three vendors, demonstrating 585 mean miles between operational mission failures. The Army's user requirement is 1,200 mean miles for that situation. Herrick noted that reliability and maintainability testing was not scheduled or conducted by Army Test and Evaluation Command or the program office, so the calculations used in the DOT&E report were “not supported by traditional [reliability and maintainability] RAM elements, such as scoring conferences and time for the vendor to implement changes.” The mileage accumulated and referenced in the report was “not meant to evaluate RAM by the Army, but rather to provide the program office and contractor an initial insight on the capability of the system over 500 miles,” Herrick added. The vehicle's RAM testing is scheduled to begin this month, he added.. The service wasn't able to evaluate every aspect of the vehicle before moving into production, but it plans to test the vehicle's ability to be carried by a Chinook during its initial operational test and evaluation this year. Now that the Army has chosen the GM Defense vehicle, it has already initiated developmental testing that will lead to an initial operational test and evaluation in August 2021 at Fort Bragg, North Carolina. That testing began in November 2020. https://www.defensenews.com/land/2021/01/25/infantry-squad-vehicle-is-a-cramped-ride-but-army-says-it-meets-requirements/

All news