Indirect Fires launchers on track amid supply chain challenges

On the same subject

• 

  April 17, 2020 | International, Aerospace

  Roper Sees Air Force ‘Flying Cars’ In Production By 2023

  "We are going to accelerate this market for domestic use in a way that also helps our military," Roper stressed. "The Air Force is all in." By THERESA HITCHENSon April 16, 2020 at 7:15 PM WASHINGTON: ‘Flying cars' using electric vertical takeoff and landing (eVTOL) technology could be in full-up production for Air Force use in moving cargo and people within three years, says Air Force acquisition head Will Roper. Such a capability, Roper enthused, would give the US military the ability to undertake missions “in three dimensions that we normally do in two,” giving the services “much greater agility.” This is why the Air Force program for investing in commercial firms now pursuing eVTOL vehicles is called “Agility Prime,” he noted. The Air Force will take a first look at vendor offerings in a virtual pitch event at the end of the month, with a focus on small eVTOL vehicles that could be used for missions involving transport of only a few people. Roper told reporters today that the size of any future Air Force vehicle buys would depend on what missions eVTOL vehicles prove capable of carrying out. “If it's helping us to do logistics at the edge, we could end up buying these in higher quantities. If it's things like security and rescue, it will be smaller quantities,” he explained. Roper has previously said he envisions large flying cars for carrying cargo, as well as smaller vehicles for Special Operations-type missions. But no matter what, Roper added that he expects that granting commercial producers Air Force safety certifications and allowing them to rack up flying hours under Agility Prime “will really help accelerate domestic use of these vehicles and [allow some companies to] get FAA certification sooner that it would have come if we had not interjected ourselves into the market.” The Agility Prime program will hold a “virtual launch event” April 27 to allow vendors to showcase their capabilities and interact with potential investors from both the private sector and the military, the Air Force Life Cycle Management Center (AFLCMC) announced earlier this week. Roper, who will give a keynote, said the event originally had been planned as a live demonstration of capabilities by chosen vendors at the annual South By Southwest music festival in Austin that was scheduled for March 13-22, but cancelled due to the COVID-19 pandemic. “The objective of the event is to reinforce the Air Force commitment to partnering with industry, investors, and the interagency to help ensure there is a robust domestic capability in this new aerospace sector,” AFLCMC explained. Agility Prime is designed as a “challenge” where eVTOL vehicle makers compete in a series of demonstration that ultimately could result in a contract for full-scale production. According to documents provided for potential competitors on the program website, the Air Force is asking potential vendors to be able to complete a flight test by Dec. 17. In the first round, companies will need to demonstrate the following specifications: Payload: 3-8 personnel Range: Greater than 100 miles Speed: Greater than 100 mph Endurance: Greater than 60 minutes Roper said the second round of the competition would be dedicated to larger vehicles for cargo, and multiple people. Agility Prime is a unique effort that involves a number of service entities working together, including AFLCMC, the Program Executive Office for Mobility, Air Force Research Laboratory (AFRL), the Air Force Warfighting Integration Capability (AFWIC) office, AFWERX, and the new AFVentures office that serves as an intermediary between vendors and venture capital providers. Roper said that besides helping to move the US into a prime spot in an emerging marketplace, he intends Agility Prime to also serve as an example to the commercial sector that the Air Force is serious about being “a good innovation partner.” One of the hallmarks of Roper's term as Air Force acquisition chief has been his focus on figuring out how to leverage commercial research and development to help DoD ensure that it can stay ahead of China in the pursuit of new technology — arguing that innovation is the new battlefield. https://breakingdefense.com/2020/04/roper-sees-air-force-flying-cars-in-production-by-2023

• 

  November 5, 2024 | International, C4ISR, Security

  FBI Seeks Public Help to Identify Chinese Hackers Behind Global Cyber Intrusions

  FBI seeks public help on global cyberattacks involving Chinese APTs using edge device exploits

• 

  December 16, 2019 | International, Aerospace

  Bell Invictus to Offer Army ‘Lower-Risk Path’ to FARA Capabilities

  By Brian Garrett-Glaser ARLINGTON, Texas — Bell's offering for the Army's Future Attack Reconnaissance Aircraft (FARA) contest, the 360 Invictus, is intended to offer the Army an insurance policy by presenting a lower-risk path to the capabilities it hopes to acquire as a “knife fighter” light attack helicopter to replace the retired OH-58 Kiowa Warriors. The Invictus, with its low-drag tandem cockpit design, draws from a lot of the development Bell has put into the 525 Relentless, a super-medium utility aircraft it hopes will be the first fly-by-wire rotorcraft certified for the civil market. Though Bell's FARA program is newer than some of its competitors, such as Sikorsky's S-97 Raider — Bell officials said the program had just three employees at this time last year and now comprises over 200 — the company believes its reliance on systems which it already has at a high technology readiness level due to work on the 525 will provide the Army with a compelling aircraft inside of its cost and timeline objectives. “It's still a very advanced aircraft. But by using technologies that we already had high TRLs in, or high manufacturing readiness levels in, we are ahead on that timeline piece,” Frank Lazzara, director of advanced vertical lift systems, told Avionics International during a press visit to the company's Flight Research Center here. The Invictus design meets or exceeds Army requirements in every area, according to Lazzara, due in part to the clean-sheet engineering that went into the Bell 525, including in the main and tail rotor systems. That aircraft has flown in excess of 200 knots without issue, despite being designed for 160 knots cruise speed. Bell intends the Invictus to cruise efficiently at 180 knots. “We flew [the 525] until we said we're done, but that rotor wasn't done,” said Josh O'Neill, senior manager for technology and evaluation on the Bell 525 program. “So we went not just 201 knots. It was a good bit more than that.” The 525 Relentless was the first aircraft Bell designed “totally in the 3D space,” O'Neill said, and the Invictus is similarly using a digital thread, enabling things like virtual reality maintaining exercises to provide design feedback without a physical product. “You have a digital thread, the same part that's used when you design your aircraft is used in the maintenance training, used throughout the product,” said O'Neill. “You design the aircraft in 3D, lay out all the systems and you're able to go in there with an actual maintainer. So we pulled [a line maintainer] and had him put the gloves on and go maintain the aircraft. And you can see in the 3D space, I need to reach around this piece, I need to turn my hand in a way that the human hand doesn't like to be turned. So we need to move that item.” As a fly-by-wire aircraft designed with a modular open systems architecture (MOSA) approach, Bell believes Invictus will provide the Army with an path to autonomy — or enable a single person in the aircraft to focus on mission functionality — similar to Bell's approach with the V-280 Valor, its offering for the Future Long-Range Assault Aircraft (FLRAA) competition. Bell officials said they are currently introducing autonomous flight software and performing software regression tests for that aircraft and intend to begin autonomous flight tests within the next few months. In March 2020, when the Army narrows the FARA competition from five companies to two, Bell's team will be nine months into design. After that, two of the five designs — selected from Sikorsky, Bell, Karem Aircraft, AVX/L3Harris, and Boeing — will be selected to participate in a fly-off slated for the second half of 2022. The Army hopes to field the first FARA aircraft in 2028. https://www.aviationtoday.com/2019/12/15/bell-invictus-offer-army-lower-risk-path-fara-capabilities/