Back to news

December 14, 2023 | International, Aerospace

How F-16 fighter jets could reshape Ukraine's aerial battlefield

On the same subject

  • Pilatus PC-21: This simulator burns jet fuel

    January 6, 2020 | International, Aerospace

    Pilatus PC-21: This simulator burns jet fuel

    Posted on January 6, 2020 by Robert Erdos The dogfight was over in seconds. Our radar painted a bogey closing on us from about 20 miles. Selecting the radar to “Track” mode, a tone in our helmets confirmed that a radar-guided missile had locked on the target, and with a squeeze of the trigger we dispatched a lethal message about virtue and democracy. Splash one bad guy. There was something unusual about our air combat victory: there was no bogey, no radar, and no missile. The entire engagement was an elaborate airborne simulation. It was all in a day's work for the PC-21; Pilatus' latest concept in pilot training. Pilatus Aircraft Limited invited Skies to its factory in Stans, Switzerland, to experience something new and innovative in military pilot training. At first, the experience was, frankly, a bit boggling. Would we be flying or were we simulating? Well, both. Modern technology allows training to be conducted on the ground in simulators, often to a high degree of fidelity but, as any pilot knows, simulators have their limitations, particularly in the realm of dynamic manoeuvring. With the PC-21, Pilatus has blended the in-air and in-the-box experiences, creating a form of high fidelity, in-flight simulation. It's a capability that is a game changer in the complex and expensive business of military pilot training. What's new in flight training? Pilatus lists the PC-21's design objectives as increased performance, enhanced maintainability, lower operating costs and added capability. While it scores points on all counts, the “added capabilities” are at the heart of what makes the PC-21 unique, in that those capabilities include full-spectrum mission-systems simulation embedded within the aircraft. As combat aircraft become more sophisticated, they become easier to fly; however, increased complexity of the sensors, weapons, countermeasures and tactics make them similarly harder to fight. Introducing tactical systems and procedures early in the training makes sense. The collateral benefit of doing so in a turboprop PC-21 versus an operational combat aircraft also makes economic sense. Pilatus touts the PC-21 as a trainer that can take an ab initio pilot from their first flying lesson through fighter lead-in training. To say I was skeptical is an understatement. In my experience, a trainer that is easy enough for a new student to fly would be ill-suited for advanced air combat training. Similarly, an aircraft with sufficient performance and systems to credibly perform air combat would be too “hot” for a student. Military budget managers might eschew operating multiple types, but no single type would suffice. Pilatus was eager to prove otherwise. Two sorties were scheduled for my visit. For the first, I would ostensibly be an ab initio student. My plan was simply to strap-in and fly the PC-21, reasoning that a good trainer should be sufficiently conventional and forgiving that it shouldn't present any obstacles to a trained pilot. Admittedly, I learned to fly in an analog environment several decades ago, but that shouldn't be an impediment, right? My PC-21 training began in the simulator, a fixed-base device which replicates the aircraft with sufficient fidelity to habituate me to normal procedures, systems and basic handling. An hour in the “box” left me feeling ready to strap in and find the important levers and switches – provided that I had adult supervision. I would fly my first sortie with Pilatus' experimental test pilot Matthew “Fish” Hartkop, an ex-U.S. Navy F/A-18 pilot. Teaching the fundamentals Strapping into the Martin-Baker ejection seat – survival kit, leg restraints, oxygen hose, G-suit, communications, harnesses – puts one in a tactical frame of mind. The cockpit layout roughly emulates an F-18, with a heads-up display, three reconfigurable 6×8-inch portrait-style displays and a fighter-style up-front control panel as the interface for avionics and simulated weapons systems. The stick and throttle emulate a fighter's hands-on-throttle-and-stick (HOTAS) design. The cockpit layout was snug and utilitarian. Hartkop talked me through the start-up of the digitally controlled engine, and we were ready to taxi in about three minutes. The mechanical nosewheel steering was tight and responsive, with only a touch of brake required to regulate speed. The field of view from the front seat through the single-piece canopy was expansive, and I was beginning to think that the PC-21 was no big deal. Then I opened the throttle. To tame propeller torque, full throttle is scheduled to deliver “just” 1080 HP below 80 knots indicated airspeed (KIAS), increasing to its rated 1600 HP above 200 KIAS. Initial acceleration was brisk behind 1080 HP, and remained strong as we cleaned up landing gear and flaps and accelerated to the scheduled 190 KIAS climb speed, where we were rewarded by a spectacular 3,900 foot-per-minute initial climb rate. In addition to taming the natural directional instability of a propeller, the speed-scheduled power limits gave the PC-21 the characteristic long slow push of a pure jet, allowing me, as Hartkop put it, to “quickly forget about the propeller.” Aerobatics are a productive way to get acquainted with a new airplane. Flying in the highly segmented Swiss airspace was a bit like learning to swim in a bathtub! Most of our aerobatics seemed to occur out of necessity as we bounced off the corners of the tiny country, but I was in pilot heaven. Friendly handling I found the simple, reversible, mechanical flight controls – with hydraulically-boosted ailerons augmented by roll spoilers – to be light, crisp and predictable. The published maximum roll rate of 200 degrees per second is sufficient to replicate tactical manoeuvring. Wind-up turns to for ‘g' displayed a well-balanced stick-force gradient estimated at 10 pounds per ‘g.' Overall, the control harmony and response of the PC-21 were delightful throughout the flight envelope. Cruising in slow flight at 95 KIAS in the landing configuration, I did some crisp roll attitude capture tasks, expecting to need copious rudder co-ordination, but the PC-21 rewarded me with cleanly decoupled roll response. The published stalling speed of 81 KIAS makes the PC-21 a fairly hot single-engine airplane, but the stall characteristics in both the clean and landing configuration were entirely benign, with a distinct pitch break at the stall, retaining full lateral control throughout. Having marvelled at how “unpropeller-like” the airplane was at low speed, Hartkop suggested a similar demonstration at high speed. We shoved the throttle forward, unleashing all 1600 HP as I accelerated at low level up a Swiss alpine valley. I saw 294 KIAS, which equates to an impressive 323 knots true airspeed. With 1,200 pounds usable fuel onboard, low level fuel flow averages 700 pounds per hour. At higher altitudes, Hartkop uses 300 to 400 pounds per hour as a fuel flow rule of thumb. Retaining a turboprop powerplant is a decision driven by economy, yet the expectation is that students will graduate to fly high-performance tactical jets. That is, the propeller is a training distraction that is ideally transparent to the budding jet pilot. In an effort to mask its effects, the PC-21 features a sophisticated computerized rudder trim aid device (TAD) that moves the rudder trim tab based on inputs of airspeed, engine torque, angle of attack, and load factor. The trim aid device kept the aircraft co-ordinated as we accelerated, as evidenced by a slow migration of the rudder pedals underfoot, but pilot workload to co-ordinate that big propeller was effectively nil. Something else I wouldn't have noticed unless Hartkop mentioned it: the ride. It was like rumpled velvet. The sky around us was a roiling mess of torn cumulus, so I could see that the conditions were turbulent, but the PC-21's high wing loading gave us a ride that could only be described as “jet-like.” We returned via a vectored-ILS at the nearby Swiss Air Force base at Emmen, before returning to work the airfield at Stans. Equipped with a glass cockpit, autopilot, dual civil-certified flight management systems, dual inertial reference units, dual GPS and instrument landing system (ILS) receivers, the PC-21 is very well equipped for instrument flight training. Hartkop let me loose in the circuit, and with his prompting I did a suitable job with several touch-and-go landings, a closed pattern, a flapless approach, and a practice forced landing. My experiment was to simply strap into the PC-21 and safely take it flying, figuring those first impressions would reveal any quirks awaiting the new trainee. After about 90 minutes in the front seat of the PC-21, my growing confidence with the aircraft was ample proof of its merits as a trainer. Meet the PC-21 Pilatus has been building airplanes since 1939, and is perhaps best known today for the success of its PC-12 single-engine turboprop design. However, it has long been a key player in the military training market with its PC-7 and PC-9 designs, of which over 800 have been delivered, as well as licensed variants of the PC-9, called the T-6 Texan/Harvard II. The PC-21 is an entirely new design, although by this point a mature one, having first flown in July 2002. As a trainer, the PC-21 seems exceptionally well equipped, including a heads-up display (HUD), airbrakes, health and usage monitoring system (HUMS), single-point refuelling, cockpit pressurization, onboard oxygen generating system (OBOGS) and anti-skid brakes. Pilatus claims that the turn-around between flights can be performed in 12 minutes by a single technician. The aircraft features a single digitally-controlled 1,600 horsepower (HP) Pratt & Whitney Canada PT6A-68B engine that drives a five-blade graphite propeller. For reference, that's a better pounds-per-horsepower ratio (power loading) than a Second World War P-51 Mustang, so rather satisfying performance might be anticipated. It's maximum operating speed (Vmo) is 370 KIAS (0.72 Mach). Planning for combat Our second mission was to demonstrate the PC-21's simulated tactical capabilities in a composite air-to-air and air-to-ground mission. I flew with Pilatus test pilot Reto “Obi” Obrist. Mission planning requires downloading topographic and tactical data to a removable hard drive, called a “brick.” Alternatively, an instructor in either seat in the PC-21 can enhance the scenario by assuming a degree of real-time control of the threat aircraft. It also records DATA for post-flight playback, along with HUD video, cockpit audio, and a reconstruction of all the players in the three-dimensional battle space. “Fox three” I rode the back seat as Obrist demonstrated how quickly he could make the PC-21 emulate a multi-mission fighter. Using the instructor's pages on the MFD, he “loaded” imaginary missiles onto imaginary rails on our very real aluminum wings, adding a few notional free-fall bombs and some virtual chaff and flares until we were virtually bristling with simulated firepower. We launched in a two-ship formation of PC-21s, with Hartkop departing first in the “threat” aircraft. Our aircraft split to a distance of about 30 miles and then turned toward each other. Hartkop's aircraft was continually visible on the multi-function display, based on real-time high-bandwidth datalink. Obrist obligingly explained that he had selected a “six bar scan” on the F/A-18 radar emulation. I was quickly recalling that I don't understand fighter pilot talk, but the HUD symbology indicated that a weapon had locked onto Hartkop's aircraft at a range of 16 miles, allowing Obrist to squeeze the trigger. “Fox 3,” he called on the radio, indicating a radar-guided missile shot. Hartkop was dead, sort of, until Obrist “reset” him for the next engagement. We did four air-to-air engagements. Our first engagement was simply a missile shot, but it let me experience the basic functionality of the F/A-18's AN/APG-73 radar and its associated weapons systems in a very realistic setting. The training scenarios proceeded incrementally. We set up for another engagement, but this time Hartkop seemed inclined to shoot back. The warning tone of his missile trying to lock onto our aircraft sent us into a defensive manoeuvre with some additional radar work to widen the sector scan to obtain a weapons lock. Things were getting interesting. On the next, a simulated missile was launched against us, requiring Obrist to employ the radar countermeasures. We survived. Obrist made no claims about the fidelity of the radar or weapons simulations. The performance and behaviour of the tactical systems relies upon unclassified commercial models of weapons and sensors that Pilatus has integrated into the aircraft. Exact realism isn't the objective, however. Rather, the goal is effective training. The purpose of the tactical scenarios is to teach the pilot to behave appropriately and to do so in a setting where their judgment, timing and skills are critical to the outcome. The only thing missing from complete realism were live warheads. Interestingly, some simulation models have been modified to enhance training effectiveness. For example, Hartkop explained that in the interest of improved training, the onboard dynamic model of the air-to-air missiles needed to be slowed down to give realistic time-of-flight between turboprop trainers engaging at slower speeds and shorter distances than actual fighter aircraft. Bombs without the boom There is a lovely lakeside town south of Stans that needed a bit of friendly bombing, so we split our formation, set the radar to Ground Mode, and set course for the target. I was impressed by the air-to-air radar simulation capability, but utterly gobsmacked when Obrist selected the air-to-ground mode. The synthetic radar display depicted a pseudo-photographic image of the terrain ahead. Let's take a moment to appreciate what we were seeing: In the absence of an actual radar, the radar return was simulated; meaning that the software “knew” the shape and texture of the local terrain, “knew” the characteristics of an AN/APG-73 radar beam, including all the fancy features and modes such as Doppler beam sharpening, “knew” where the radar beam was in space, and calculated what the reflected radar image should look like under those conditions. Impressive! Our navigation system put a waypoint near the target, allowing Obrist to visually identify and update the target designator during our low-level ingress to the target. The HUD guided us through a pop-up manoeuvre to the continually computed release point (CCRP), where it simulated release of the weapon. The PC-21 can simulate – and even score – gun, rocket or bomb delivery. Taking simulation airbourne The PC-21 wasn't a fighter, but you couldn't tell from where I was sitting. Taking stock of the experience, the PC-21 isn't an airplane and it isn't a simulator, but rather combines the best aspects of both to provide a unique training capability. It can't deliver a weapon, but if the need ever arises the PC-21 can teach you how. https://www.skiesmag.com/features/pilatus-pc-21-this-simulator-burns-jet-fuel

  • US Army awards $179M missile warning contract to BAE Systems

    July 16, 2020 | International, Land

    US Army awards $179M missile warning contract to BAE Systems

    By: Aaron Mehta WASHINGTON — The U.S. Army has awarded BAE Systems a contract for the first two production lots of its Limited Interim Missile Warning System, or LIMWS. The contract, which is worth $179 million, also includes funding to field the next-generation Missile Warning System, an upgrade on the Army's Common Missile Warning System. “Threats are evolving and proliferating at a rapid pace and our aircrews who fly into harm's way need the most advanced protection systems available,” Chris Austin, director of threat detection solutions at BAE Systems, said in a statement. “These orders follow an intensive two-year development and qualification program, made possible by a strong industry-government partnership focused on achieving an aggressive schedule.” The company won an initial $98 million contract to produce the systems in April 2018, with the goal of putting the capability onto 400 Black Hawk helicopters. A BAE spokeswoman this week declined to comment on what systems the LIMWS might deploy on. The Army competitively awarded that initial contract to BAE through a quick reaction capability mechanism, which bypasses the traditional lengthy acquisition process. The core of the upgrade is BAE's 2-Color Advanced Warning System, or 2CAWS, which the company says includes “an open system processor, two-color infrared sensors for increased range, and a fiber optic A-kit for faster data transmission.” Put simply, the 2CAWS should allow pilots to receive signals of incoming threats more quickly than before, and should be compatible with existing Army missile warning systems. Work will occur at the company's Merrimack, New Hampshire, and Huntsville, Alabama, facilities, the latter of which is undergoing upgrades for the project. https://www.defensenews.com/land/2020/07/15/us-army-awards-179m-missile-warning-contract-to-bae-systems/

  • Contract Awards by US Department of Defense - October 3, 2018

    October 4, 2018 | International, Aerospace, Naval, Land, C4ISR, Security

    Contract Awards by US Department of Defense - October 3, 2018

    AIR FORCE SAFRAN Landing Systems, Vellzyvillacoublay, France, has been awarded a $220,154,652 firm-fixed-price requirements contract for landing systems remanufacture and supply. This contract provides for a 10-year strategic remanufacture/supply for the KC-135 heat shields, main wheel, carbon brake, torque tube adjustor, assembly, and piston housing. Work will be performed in Vellzyvillacoublay, France, and is expected to be complete by September 2028. This award is the result of a sole-source acquisition. No funds are being obligated at the time of award. Air Force Sustainment Center, Hill Air Force Base, Utah, is the contracting activity (FA8203-19-D-0001). The Boeing Co., St. Louis, Missouri, has been awarded a $45,000,000 modification (P00011) to contract FA8681-14-D-0028 for Joint Direct Attack Munition (JDAM) technical support and integration. Boeing will provide JDAM support for studies and analysis, product improvement, upgrades and integration. Work will be performed in St. Louis, Missouri, and is expected to be completed by March 31, 2019. No funds are being obligated at the time of award. Air Force Life Cycle Management Center, Eglin Air Force Base, Florida, is the contracting activity. Industries for the Blind Inc., Milwaukee, Wisconsin, has been awarded a $10,795,849 task order for sales promotional items. This task order provides for customization and distribution of Air Force sales promotional items. Work will be performed in Milwaukee, Wisconsin, and is expected to be complete by March 29, 2019. This task order is the result of a sole-source Ability-One requirements acquisition. Fiscal 2018 operational funds in the amount of $10,795,849 are being obligated at the time of award. The 338th Specialized Contracting Squadron, Joint Base San Antonio, Texas, is the contracting activity (FA3002-18-F-0085). (Awarded Sept. 28, 2018) DEFENSE LOGISTICS AGENCY H. Brooks and Co. LLC,* New Brighton, Minnesota, has been awarded a maximum $67,500,000 firm-fixed-price with economic-price-adjustment, indefinite-delivery/indefinite-quality contract for fresh fruit and vegetables. This was a competitive acquisition with two response received. This is 54-month base contract with three 18-month tier periods. Location of performance is Minnesota, with an April 24, 2023, performance completion date. Using customers are non-Department of Defense schools and tribes. Type of appropriation is fiscal 2018 through 2023 defense working capital funds. The contracting activity is the Defense Logistics Agency Troop Support, Philadelphia, Pennsylvania (SPE300-19-D-S730). Allied Tube and Conduit Corp., Harvey, Illinois, has been awarded a maximum $37,000,000 firm-fixed-price with economic-price-adjustment contract for non-reinforced concertina razor wire. This is a two-year base contract with three one-year option periods. This was a competitive acquisition with one response received. Maximum dollar amount is for the life of the contract. Locations of performance are Illinois and Ohio, with an Oct. 2, 2023, performance completion date. Using military services are Army, Navy, Air Force and Marine Corps. Type of appropriation is fiscal 2019 through 2023 defense working capital funds. The contracting activity is the Defense Logistics Agency Troop Support, Philadelphia, Pennsylvania (SPE8E6-19-D-0001). NAVY The Boeing Co., Jacksonville, Florida, is awarded a $62,719,985 cost-plus-fixed-fee, indefinite-delivery/indefinite-quantity contract. This contract provides for F/A-18 E/F and EA-18G aircraft inspections, modifications and repairs as well as F/A-18 E/F and EA-18G Inner Wing Panel (IWP) modifications and repairs. The remanufacturing efforts for the F/A-18 E/F and EA-18G will restore aircraft and IWP service life projections to new design specifications. Work will be performed in Jacksonville, Florida (77 percent); St. Louis, Missouri (13 percent); and Lemoore, California (10 percent), and is expected to be completed in September 2019. No funds are being obligated at time of award; funds will be obligated on individual orders as they are issued. This contract was not competitively procured pursuant to Federal Acquisition Regulation 6.302-3. The Naval Air Systems Command, Patuxent River, Maryland, is the contracting activity (N00019-19-D-0003). Chugach Federal Solutions Inc.,* Anchorage, Alaska, was awarded a $67,433,703 modification under a previously awarded, indefinite-delivery/indefinite-quantity contract (N44255-14-D-9000) to exercise Option Five for base operations support at various installations in the Naval Facilities Engineering Command (NAVFAC) Northwest area of responsibility (AOR). The work to be performed provides for all management and administration, visual services, security, fire and emergency, facilities management and investment, pest control, integrated solid waste, pavement clearance, utilities services, base support vehicles and equipment, and environmental services for base operations support services. After award of this option, the total cumulative contract value will be $332,825,487. Work will be performed at various installations in the NAVFAC Northwest AOR, including but not limited to, Washington (90 percent); Alaska (1 percent); Idaho (1 percent); Iowa (1 percent); Minnesota (1 percent); Montana (1 percent); Nebraska (1 percent); Oregon (1 percent); North Dakota (1 percent); South Dakota (1 percent); and Wyoming (1 percent). This option period is from October 2018 to September 2019. No funds will be obligated at time of award. Fiscal 2019 operations and maintenance (Navy); fiscal 2019 Navy working capital funds; and fiscal 2019 Defense Health Program contract funds in the amount of $32,975,017 for recurring work will be obligated on individual task orders issued during the option period. The Naval Facilities Engineering Command, Northwest, Silverdale, Washington, is the contracting activity. (Awarded Sept. 29, 2018) CDM Constructors Inc., Carlsbad, California, was awarded a $49,118,094 firm-fixed-price contract for design and construction of a potable water treatment/blending facility at Marine Corps Air Ground Combat Center Twentynine Palms. The project includes the following main elements: new potable water treatment blending facility (treatment plant), new holding tank, new wells to extract water from the deadman aquifer, connect surprise springs existing wells to new plant, evaporation ponds, new pipelines, new and associated fiber optic cabling, widening of the access road to the water treatment plant. The contract also contains five unexercised options, which if exercised, would increase cumulative contract value to $55,482,027. Work will be performed in Twentynine Palms, California, and is expected to be completed by September 2021. Fiscal 2018 military construction (Navy)contract funds in the amount of $49,118,094 are obligated on this award and will not expire at the end of the current fiscal year. This contract was competitively procured via the Navy Electronic Commerce Online website with three proposals received. The Naval Facilities Engineering Command, Southwest, San Diego, California, is the contracting activity (N62473-18-C-4602). (Awarded Sept. 29, 2018) Syte Paschen JV,* Chicago, Illinois, was awarded a maximum amount $45,000,000 indefinite-delivery/indefinite-quantity contract for minor construction, alteration and repair of real property and utilities at Naval Submarine Base (NSB) Kings Bay. Work will primarily consist of general building type projects including industrial, administrative, training, dormitory, and community support facilities, as well as wharfs, piers, dry docks and other waterfront facilities activities. Initial task order was awarded at $96,581 for Building 3046 siding replacement within the limited area at NSB Kings Bay. Work for this task order is expected to be completed by March 2019. Work will be performed in Kings Bay, Georgia. The term of the contract is not to exceed 60 months with an expected completion date of September 2023. Fiscal 2018 operations and maintenance (Navy) contract funds in the amount of $96,581 are obligated on this award and expired at the end of fiscal 2018. Future task orders will be primarily funded by operations and maintenance (Navy). This contract was competitively procured via the Federal Business Opportunities website, with 10 proposals received. The Naval Facilities Engineering Command, Southeast, Jacksonville, Florida, is the contracting activity (N69450-18-D-0902). (Awarded Sept. 29, 2018) Skookum Educational Programs, Bremerton, Washington, was awarded a $34,403,068 indefinite-delivery/indefinite-quantity contract for base operating support services at Naval Facilities Engineering Command, Northwest. The work to be performed provides for janitorial services, grounds maintenance, facility investment, pest control, integrated solid waste, chemical toilets, pavement clearance and warehousing services. The maximum dollar value including the base period and five option yearsis $227,382,385. Work will be performed at Naval Base Kitsap (73 percent); Naval Air Station Whidbey Island (17 percent); and Naval Station Everett (7 percent) in Washington; the Acoustic Research Detachmentin Idaho (1 percent); as well as Navy Operational Support Centers in Oregon (1 percent); and Montana (1 percent), and is expected to be completed by September 2024. No funds will be obligated at time of award. Fiscal 2019 operations and maintenance (Navy) contract funds in the amount of $28,489,905 for recurring work will be obligated on individual task orders issued during the base period. This contract was awarded under the AbilityOne Program, Federal Acquisition Regulation Part 8.7, Acquisition from Nonprofit Agencies Employing People Who Are Blind or Severely Handicapped. The Naval Facilities Engineering Command, Northwest, Silverdale, Washington, is the contracting activity (N44255-18-D-5009). (Awarded Sept. 30, 2018) Johnson Controls Government Systems LLC, Gaithersburg, Maryland, was awarded a $30,419,226 firm-fixed-price modification to increase the maximum dollar value of a previously awarded indefinite-delivery/indefinite-quantity contract task order (DACA87-97-D-0069-EJP3) to upgrade, improve, or replace cogeneration plant utility monitoring control systems (UMCS) within the Naval Facilities Engineering Command Southwest area of responsibility. The work to be performed provides for contractor-installed computer systems and networked building control devices to bring the UCMS into compliance with current Department of Navy risk management framework requirements by ensuring critical upgrades to legacy hardware and software; switchgear communications processors to ethernet; and complete commissioning of the cogeneration plant facilities and programmable logic controller after migration from the legacy system. After award of this modification, the total cumulative task order value will be $186,268,118. Work will be performed in Twentynine Palms, California, and is expected to be completed by November 2025. For this project, Marine Corps Air Ground Combat Center has agreed to pay for the costs of services/construction from project financing which will be obtained by Johnson Controls Government Systems LLC. The Naval Facilities Engineering Command Engineering and Expeditionary Warfare Center, Port Hueneme, California, is the contracting activity. (Awarded Sept. 29, 2018) Industria Inc.,* Des Plaines, Illinois, was awarded a maximum amount $25,000,000 indefinite-delivery/indefinite-quantity contract for exterior building envelope repairs for the James A. Lovell Federal Health Care Center and Naval Station Great Lakes. This project includes tuck-pointing for all exterior mortar joints and replacement of brickwork that is damaged, cracked, spalled, missing or unsound. Mortar and brick replacement shall match existing and shall be properly sealed. Replace existing weeps and weep holes with new and include cell vents. Replace exterior gutters, downspouts, louvers, wall vents and gutter flashing as needed. Repair roof as needed. Repair foundation as needed. Replace windows as needed. Initial task order was awarded at $7,190,979, inclusive of options, for masonry tuck-pointing and exterior repairs at building 4VA at James A. Lovell Federal Health Care Center. Work for this task order is expected to be completed by March 2019. All work on this contract will be performed in North Chicago (80 percent); and Great Lakes (20 percent), Illinois. The term of the contract is not to exceed 60 months with an expected completion date of September 2023. Fiscal 2018 Joint Department of Defense/Veteran's Affairs Medical Facility Demonstration funds in the amount of $2,030,650 are obligated on this award and will not expire at the end of the current fiscal year. Future task orders will be primarily funded by operations and maintenance, (Navy); and Joint Department of Defense/Veteran's Affairs Medical Facility Demonstration. This contract was competitively procured via the Federal Business Opportunities website, with three proposals received. The Naval Facilities Engineering Command, Mid-Atlantic, Norfolk, Virginia, is the contracting activity (N40085-18-D-3019). (Awarded Sept. 30, 2018) Environmental Chemical Corp., Burlingame, California, was awarded $15,848,403 for firm-fixed-price task order N6945018F0086 under a previously awarded, multiple award construction contract (N62470-13-D-6020) for construction of Hurricane Matthew Phase 4C repairs at Atlantic Underwater Testing and Evaluation Center, Andros Islands. The work to be performed provides for construction, alteration, and repair of real property and utilities. Work also includes any and all ancillary and incidental mechanical and electrical support services needed to accomplish required work including, but not limited to, disconnects, temporary reconnects, removals, extensions, modifications, alterations, reinstalls, new components, and permanent reconnects necessary for functional operation. Work will be performed in Andros Islands, Bahamas, and is expected to be completed by December 2019. Fiscal 2017 and fiscal 2018 research, development, test and evaluation(Navy) in the amount of $15,848,403 are obligated on this award, of which $15,061,888 expired at the end of fiscal 2018. One proposal was received for this task order. The Naval Facilities Engineering Command, Southeast, Jacksonville, Florida, is the contracting activity. (Awarded Sept. 30, 2018) BB&E Inc.,* Northville, Michigan, was awarded $10,090,253for firm-fixed-price task order N4008518F9965 under a General Services Administration One Acquisition Solution For Integrated Services (OASIS) small business contract for professional support services at various locations within the Naval Facilities Engineering Command, Mid-Atlantic area of responsibility. The work to be performed provides for professional support services to assist in completing various capital improvement projects through contracted design and construction support in the areas of architecture, design (including various engineering disciplines) and construction management. Work will be performed at various installations in the Hampton Roads area, Virginia (74 percent); Albany, Georgia (8 percent); Jacksonville, North Carolina (5 percent); Havelock, North Carolina (3 percent); Parris Island, South Carolina (3 percent); Crane, Indiana (3 percent); Great Lakes, Illinois (2 percent); and Philadelphia, Pennsylvania (2 percent), and is expected to be completed by September 2022. Fiscal 2018 operations and maintenance, (Navy) contract funds in the amount of $9,295,220 are obligated on this award, of which $8,595,220 expired at the end of fiscal 2018. Five proposals were received for this task order. The Naval Facilities Engineering Command, Mid-Atlantic, Norfolk, Virginia, is the contracting activity (N40085-18-F-9965). (Awarded Sept. 30, 2018) Coastal Enterprises of Jacksonville Inc., Jacksonville, North Carolina, was awarded an $8,008,489 firm-fixed-price, indefinite-delivery/indefinite-quantity contract for Naval Hospital custodial services at Marine Corps Base Camp Lejeune. The work provides for various custodial services including, but not limited to, emptying trash cans, sweeping, dusting, mopping, cleaning toilets, and medical waste disposal for the naval hospital, medical clinics, dental clinics, and wounded warrior barracks. Work will be performed in Jacksonville, North Carolina, and is expected to be completed by September 2019. Fiscal 2019 operations and maintenance (Navy) contract funds in the amount of $7,760,087 are obligated on this award and will expire at the end of the current fiscal year. This contract was procured via AbilityOne in accordance with Federal Acquisition Regulation 8.603. The Naval Facilities Engineering Command, Mid-Atlantic, Norfolk, Virginia, is the contracting activity (N40085-18-D-6161). (Awarded Sept. 30, 2018) DEFENSE HEALTH AGENCY M2 Technology, San Antonio, Texas, was awarded an $8,419,560 firm-fixed-price contract (HT0015-18-F-0136) providing replacement computer server hardware parts for the Defense Health Agency (DHA). This is a one-time purchase order for hardware placed against National Aeronautics and Space Administration Solution enterprise-wide supporting Military Health System operations. This contract award differs from previous contract awards because this procurement is for the replacement parts for end-of-life computer server hardware currently in use by the Military Health System. This contract is a small business competitive set-aside and received five quotes. This contract is funded by fiscal 2018 procurement funds. The Contracting Office-Health Information Technology, San Antonio, Texas, is the contracting activity. (Awarded Sept. 29, 2018) *Small Business https://dod.defense.gov/News/Contracts/Contract-View/Article/1652198/source/GovDelivery/

All news