Back to news

September 27, 2021 | International, Aerospace

Here are the cheap counter-drone solutions DoD tested in the Arizona desert

Find out who participated in the Joint Counter-Small Unmanned Aircraft Systems Office's second demonstration as the Pentagon looks to bring new counter-drone capabilities into an enduring framework.

https://www.defensenews.com/land/2021/09/24/here-are-the-cheap-counter-drone-solutions-dod-tested-in-the-arizona-desert/

On the same subject

  • Eurofighter: flight tests continue with the E-SCAN radar

    June 3, 2020 | International, Aerospace

    Eurofighter: flight tests continue with the E-SCAN radar

    May 29, 2020 - A Eurofighter flight test campaign dedicated to the configuration chosen by Kuwait, with E-SCAN radar and other important enhancements, is certainly demanding and complex. Mario Mutti, Head of Project Test Pilot Fighters and Standardization of Leonardo's Aircraft Division, tells us how it is proceeding. Leonardo ISPA 6 (Instrumented Series Production Aircraft) is the most advanced Eurofighter Typhoon test aircraft with E-SCAN radar and it recently joined the other EF Typhoon test aircraft after the successful completion of an important lay-up in November last year. "The testing campaign for the new radar is particularly demanding - Mario Mutti, Head of Project Test Pilot Fighters and Standardization of Leonardo's Aircraft Division tells - there is a need for very large and dedicated work areas, the support of other aircraft that act as "smart" targets, an extremely accurate post-flight data analysis that involves multiple sites (in Italy and partner Countries) and optimizes the "set-ups" of the next flight. A very complex flight test system. The Italian Air Force contributes in a fundamental way: the aircraft available in support of test flights are always on time and offer a very consistent capability both quantitative and in terms of skill. The complex scenarios planned in flight are possible only thanks to the experience of the military pilots and our two-seater prototype that allows for synergy, even in the cockpit, between test pilot and flight test engineer." This challenging programme was completed as planned notwithstanding the difficulties created by the pandemic conditions under which the teams were operating; all flight test points were tested and all the required evidences obtained to provide final clearance on Kuwait's Typhoon. The tactical advantage given by the radar's Antenna Repositioner – allows a field of regard 50 per cent wider than conventional E-SCAN fixed plate systems - was clearly evident since the early stages of development. "The COVID emergency did not stop us, on the contrary, it strengthened us! - Mutti continues - Very stringent procedures, always in line with national and corporate protocols allowed us to operate with a motivated team that has challenged adversity with great dedication and sense of responsibility. International sharing is actually more difficult and efforts are being made to restore it to maximum effectiveness." With the above flights, ISPA6 has completed the overall P3Eb Flight Test campaign, which represent a significant step forward to allow the delivery of the Eurofighter to the Kuwait Air Force. "The Eurofighter is always an excellent platform – Mutti comments with satisfaction - and demonstrates its extensive development capability already foreseen in the design phase. Ergonomics are even more optimized and the new radar is perfectly integrated into a general growth of capabilities that includes sensors, weapons and increasingly advanced and performing functions”. The Eurofighter Typhoon ISPA 6 ISPA 6 is one of the three EF Typhoon test aircraft equipped with the Electronic Scan Radar made by the EuroRadar Consortium, led by Leonardo UK in Edinburgh, and it's currently allocated to the EF/NETMA P3Eb (Eurofighter Consortium/NATO Eurofighter and Tornado Management Agency - Phase 3 Enhancements Package b) development programme to perform E-SCAN Entry Into Service flight tests and provide final clearance to the Kuwait customer. After its first flight in the current configuration, at the end of last year, on the 3rd of March ISPA 6 started the so-called “E-SCAN XCR#1” flight test campaign and performed several sorties successfully concluded on the 27th of March. The first sorties were performed in cooperation with Leonardo's IPA2 (Instrumented Production Aircraft) test aircraft and the last ones were conducted in cooperation with Eurofighter Typhoons of the Italian Air Force. Recently ISPA 6 has flown to refine ECCM (Electronic Counter-Countermeasures) Radar capabilities, while in the next months will perform final E-SCAN software release certification flights; then will progress flying to test further E-SCAN software capabilities by the end of the year. View source version on Leonardo: https://www.leonardocompany.com/en/news-and-stories-detail/-/detail/eurofighter-flight-tests-continue-with-the-e-scan-radar

  • GKN Aerospace, SAMC and AVIC Supply sign JV Agreement for Advanced Aerostructures

    December 9, 2020 | International, Aerospace

    GKN Aerospace, SAMC and AVIC Supply sign JV Agreement for Advanced Aerostructures

    December 8, 2020 - COMAC subsidiary SAMC (Shanghai Aircraft Manufacturing Company), AVIC Supply and GKN Aerospace have signed a joint venture (JV) agreement for the manufacture of Composite and Metallic Aerostructures in Jingjiang, Jiangsu Province, China. This represents a significant milestone in GKN Aerospace's long-stated ambition to grow within the commercial aerospace market within China. The state-of-the-art, 80,000m2 facility in Jingjiang will be GKN Aerospace's first aerostructures JV in China. It will offer COMAC, AVIC and Western customers the opportunity to access an important local supply of advanced aerostructures in the country. The JV builds on COMAC, AVIC and GKN Aerospace's proven track record in the global commercial aviation industry. Production is scheduled to begin in Q4 2021 and, by the mid-2020s, the workforce is expected to grow to 1,000 people. In addition to the JV facility, GKN Aerospace is in final preparations to open (April 2021) a separate 20,000 m2 site in Jingjiang, focusing on the manufacture of transparencies for the commercial market. Both endeavours will help meet China's national industrial strategy of “made in China 2025”. John Pritchard, President Civil Aerospace at GKN Aerospace said: “The establishment of the first aerostructures JV and the upcoming opening of the transparencies facility in Jingjiang, Jiangsu Province, China are exciting milestones. We are proud to extend our footprint in China by working together with our committed partners COMAC, SAMC and AVIC Supply. The collaboration with the local authorities and support of the regional government has been vital. I am sure the combination of our dedicated teams, technology leadership and extensive aerospace experience will lead to exciting growth opportunities. We are excited to be part of the growth of the commercial aerospace industry in China.” GKN Aerospace has a strong three-continent footprint, supporting customers in the Americas, Europe and in Asia. In recent years, growth in Asia has included opening a new wiring systems plant in Pune, India in Q4 2019, as well as unveiling a new aero-engine repair and research plant in Johor, Malaysia, in October 2018. With two new sites in China, GKN Aerospace will be delivering aerostructures, wiring systems and transparencies for the commercial aerospace market from seven sites across China, India, Malaysia and Turkey. View source version on GKN Aerospace: https://www.gknaerospace.com/en/newsroom/news-releases/2020/gkn-aerospace-samc-and-avic-supply-sign-jv-agreement-for-advanced-aerostructures/

  • Cubic to go private in $3B sale to Veritas, Elliot

    April 1, 2021 | International, Aerospace

    Cubic to go private in $3B sale to Veritas, Elliot

    Cubic Corp. says it has accepted a proposal to sell itself for $75 per share.

All news