Elbit Systems UK Awarded Contract for Future Armoured Vehicle Training

On the same subject

• 

  December 19, 2018 | International, Aerospace

  L3 Awarded Comprehensive F-16 Pilot Training Contract Valued at $350 Million

  – The USAF Contract Consolidates Multiple Training Programs Into a Single, Unified Program – NEW YORK--(BUSINESS WIRE)--Dec. 18, 2018-- L3 Technologies (NYSE:LLL) has been selected as the prime contractor for the F-16 Simulators Training Program (STP) by the U.S. Air Force. Valued at $350 million, the F-16 STP contract consolidates the previous F-16 Mission Training Center (MTC), F-16 Weapons and Tactics Trainer (WTT) Advanced Sustainment, and F-16 Training System (TS) programs into a single, unified program. “For more than four decades L3 has proudly developed pilots and expert technicians in support of U.S. Air Force F-16 weapons system operations,” said Christopher E. Kubasik, L3's Chairman, Chief Executive Officer and President. “This award demonstrates our ability to deliver comprehensive, world-class training solutions that support total air readiness.” Now in a prime contractor role, L3 was the incumbent on two of the three predecessor programs to the F-16 STP, including the F-16 MTC and F-16 TS. The company was awarded the F-16 MTC in 2008 through a competitive procurement. “By combining three different programs, F-16 STP will enable the U.S. Air Force to provide a more cost-effective approach to maintaining concurrency for the warfighter,” said Mike Swanger, Program Manager, F-16 Simulators, U.S. Air Force. “Our international allies will have the opportunity to benefit from our expertise in their own countries,” added Lenny Genna, President of L3 Link Training & Simulation. “We are proud to build on our long-standing partnership with the Air Force and look forward to being a key provider of F-16 training systems and services for many years to come.” Since 1986, L3 has provided the U.S. Air Force with state-of-the-art, high-fidelity F-16 training systems at both domestic and overseas locations. The company simultaneously ensures that the training systems remain concurrent with the fielded aircraft configurations to ensure the highest-quality training. L3's training systems support maintainers and aircrews across the globe. L3 Technologies is an agile innovator and leading provider of global ISR, communications and networked systems, and electronic systems for military, homeland security and commercial aviation customers. With headquarters in New York City and approximately 31,000 employees worldwide, L3 develops advanced defense technologies and commercial solutions in pilot training, aviation security, night vision and EO/IR, weapons, maritime systems and space. The company reported 2017 sales of $9.6 billion. To learn more about L3, please visit the company's website at www.L3T.com. L3 uses its website as a channel of distribution of material company information. Financial and other material information regarding L3 is routinely posted on the company's website and is readily accessible. Safe Harbor Statement Under the Private Securities Litigation Reform Act of 1995 Except for historical information contained herein, the matters set forth in this news release are forward-looking statements. Statements that are predictive in nature, that depend upon or refer to events or conditions or that include words such as “expects,” “anticipates,” “intends,” “plans,” “believes,” “estimates,” “will,” “could” and similar expressions are forward-looking statements. The forward-looking statements set forth above involve a number of risks and uncertainties that could cause actual results to differ materially from any such statement, including the risks and uncertainties discussed in the company's Safe Harbor Compliance Statement for Forward-Looking Statements included in the company's recent filings, including Forms 10-K and 10-Q, with the Securities and Exchange Commission. The forward-looking statements speak only as of the date made, and the company undertakes no obligation to update these forward-looking statements. View source version on businesswire.com: https://www.businesswire.com/news/home/20181218005778/en/ Source: L3 Technologies L3 Technologies Corporate Communications 212-697-1111 https://www.l3t.com/press-release/l3-awarded-comprehensive-f-16-pilot-training-contract-valued-350-million

• 

  January 26, 2022 | International, Aerospace, Naval, Land, C4ISR, Security

  Podcast: Sizing Up the U.S. Defense Industrial Base

• 

  September 4, 2019 | International, Land

  Textron Preps For Mass Production Of New Army Rifle

  By SYDNEY J. FREEDBERG JR. WASHINGTON: Textron has partnered with global gun-maker Heckler & Koch to mass-produce new rifles for the Army and with ammunition giant Olin Winchester to churn out the high-powered yet lightweight 6.8 millimeter rounds. Textron still has to beat both General Dynamics and Sig Sauer for the right to build the Next Generation Squad Weapons (NSGW). All three companies won awards last Thursday to build prototypes for troops to test, starting this coming spring and continuing through late 2021. No follow-on production contract is guaranteed. But Textron is watching the Army's urgent push to modernize across the force, from assault rifles to hypersonic missiles and wants to be ready to sprint to mass production if it wins. Textron could do everything in house, senior VP Wayne Prender said. But, he told reporters this morning, by working with Olin Winchester and H&K, which are experienced with largescale manufacture of ammo and weapons respectively, “we are preparing ourselves for a high rate of production.” The Army wants to start fielding two variants of NGSW to tens of thousands of close combat troops — infantry, scouts, special operators, and so on — in 2022. Support troops and vehicle crews will stick with the current M4 carbine for the indefinite future. But frontline ground combatants will get more than just a gun. Linked wirelessly with electronics all over the soldier's body, including Microsoft HoloLens-derived targeting goggles called IVAS, the Next Generation Squad Weapon is meant to be just one lethal component of a larger, high-tech system. It's like the Hellfire missiles on an Apache helicopter or the 120 mm Rheinmetall smoothbore cannon on an M1 tank, except this “weapons platform” moves on foot. This approach is part of a wider push, begun by former Defense Secretary (and Marine Corps rifleman) Jim Mattis, to improve the Close Combat Lethality of the military's most exposed members. The American grunt has accumulated more and more high tech over the last two decades. Designing a new weapon from scratch is a chance to streamline the scopes, cables, batteries, and other impedimenta festooning modern foot troops. “All of those are now part of an integrated weapon system, versus a rifle that then has something else strapped onto it with wires hanging off,” Prender told reporters. “We can make some smart decisions early in the design process that enable it to be cleaner.” That should make the new weapon easier to use, lighter, and even better balanced, since the center of gravity is now calculated with installing add-ons in mind. Three Contenders, 27 Months While troops will test the first prototypes this spring, each contender has 27 months to deliver a total of 53 NGSW assault rifles — potential replacements for the M16/M4 family in service since Vietnam — and 43 automatic rifles — replacing the M249 SAW — along with 850,000 rounds of 6.8 mm ammunition. Like the M16, M4, and M249 with the 5.56 mm cartridge, the new NGSW family will all share a common 6.8 mm round, which is supposed to deliver longer range and greater body-armor-penetrating power without increasing weight much. Each competitor has their own spin on how to deliver the new rifle bullet. Sig Sauer, which already builds the Army's standard 9mm pistol and a host of other limited-issue weapons, has taken what seems to be the most conservative approach. It offers what the company calls a “hybrid” cartridge, which is still made of metal like traditional brass casings, but significantly lighter. General Dynamics's Ordnance & Tactical Systems (OTS) division has partnered with a Texan firm, True Velocity, to build “composite” rounds out of polymers. In layman's words, the bullet is packaged, not in brass, but rugged plastic. Again, the goal is to save weight. Textron's approach is arguably the most radical, to the point it doesn't even look like a bullet, just a cylinder that's equally blunt on both ends. That's because it's a cased telescoped round, sheathing the entire bullet in a polymer shell, surrounded by its propellant instead of sitting on top of it. (The resulting case looks like a folded-up telescope, hence the name). Textron says this method cuts weight per shot by 40 percent, a potential boon for overburdened foot troops. The Army's new modernization strategy — after decades of cancelled programs and incremental changes to aging weapons — is to try such great leaps forward but then test prototypes ASAP with real troops in the field. The service has been “opening the doors of the Army to the contractors to get that feedback early and often,” Prender said approvingly. Each round of user feedback is meant to help the contractors improve their product, and the military to refine their specifications, until the service can confidently choose a refined design. Now, the Army isn't locking itself in. Whoever does best in testing, the Army hasn't promised the winner a production contract. But Textron is betting they can convince an eagerly modernizing Army that their product is not only superior but ready to field without further R&D. “Whether [to] move right into an initial Low-Rate Initial Production, followed by fielding and first unit equipped, or [to do] additional prototyping and maturation of the weapon system... all that will be determined by the Army,” Prender told reporters. “We have high confidence that our weapon system will meet all of the requirements that the Army has laid out... so we're looking forward to at the end of those 27 months to move into production.” https://breakingdefense.com/2019/09/textron-readies-for-mass-production-of-new-army-rifle