Canada announces next step in future fighter competition

On the same subject

• 

  January 29, 2018 | Local, Naval

  ASTERIX COMPLETES ROYAL CANADIAN NAVY TRIALS, ACHIEVES FULL OPERATIONAL CAPABILITY (FOC)

  Halifax, NS – Monday January 29th 2018: Today, Davie Shipbuilding and Federal Fleet Services announced that following an intensive period of at-sea trials and testing, Asterix has been formally accepted by the Department of National Defence and has now entered full operational service with the Royal Canadian Navy (RCN) and Royal Canadian Air Force (RCAF). As planned, Asterix performed daily replenishment-at-sea (RAS) exercises with the RCN and conducted extensive RCAF CH-148 Cyclone helicopter operations to prove and demonstrate the world-leading capabilities of the Resolve-Class Naval Support Ship. These exercises have included everything from dual RAS operations to helicopter landing, take-off and vertical replenishment trials. Spencer Fraser, CEO of Federal Fleet Services commented “To deliver the first Canadian naval ship in over twenty years, the first supply ship in almost 50 years, and to reach FOC so efficiently and in such a short period of time is a testament to the hard work, dedication and dynamism of the teams at Davie and FFS. We are all very proud of our achievement and appreciative of the professional support we have received from DND and PSPC.” Fraser added, “We promised the government that we would fill a strategic gap in an expedited manner, that we would save the Canadian taxpayer money with our solution, and most importantly, that we would provide the men and women of the RCN and RCAF with a world-class capability they could be proud of. Today marks that achievement and we stand ready to assist the Government of Canada to do more.” Alex Vicefield, Chairman of Davie commented, “We would like to thank Prime Minister Trudeau for the confidence and trust he placed in Canada's largest shipbuilder with the award of this program. We are proud to have delivered, as promised, on this vital defence capability which will serve Canada for years to come.” Over 900 Canadian companies from coast-to-coast participated in the build of Asterix, and the Resolve Class has been hailed worldwide for the innovative Canadian solutions integrated onboard. Participation in this project has assisted the exports of many of Davie's Tier 1 sub-contractors; Hepburn of Toronto designed and built the RAS equipment, L3 MAPPS of Montreal designed and installed the Integrated Platform Management System and OSI of Vancouver designed and built the Integrated Bridge System. By participating in the project, these and other innovative Canadian companies have been able to win export opportunities. Asterix is now ready for global deployment to support combat and humanitarian operations as directed by the Government of Canada. Photographs of the RCN and RCAF trials are available for download in high-resolution here: http://www.davielibrary.com/Project-Resolve-/First-Navy-Trials/i-XHjt2VJ http://www.davie.ca/news/asterix-completes-royal-canadian-navy-trials-achieves-full-operational-capability-foc/

• 

  June 14, 2023 | Local, Aerospace

  John Ivison: Canada is missing a crucial NATO exercise because our Air Force is up on bricks

  DND said the RCAF was unable to participate because 'many of our aircraft and personnel are currently committed to modernization activities'

• 

  June 11, 2018 | Local, Aerospace, Naval, Land, C4ISR

  Here are just some of the ways Canadian technology keeps Americans safe

  It's been a week since the Trump White House slapped Canada with steel and aluminum tariffs on the ground that reliance on our imports was threatening the “national security” of the United States. If Canadians are particularly galled at this, it might be because no foreign country in modern times has done more to arm and equip the United States than Canada. “I would not be surprised if every single major aircraft or warship in U.S. military service today has Canadian components in it,” said Richard Shimooka, a senior fellow at the Macdonald-Laurier Institute. Below, a cursory summary of some of the Canadian stuff used by history's most powerful military. Landing gear We'll start with an entry that directly concerns steel and aluminum. Quebec-based Héroux-Devtek is the world's third largest aircraft landing gear company, and some of that is thanks to a longstanding relationship with the U.S. Air Force and U.S. Navy. Specifically, Héroux-Devtek is in charge of landing gear repair and overhaul for several large U.S. aircraft, including the heavy-lift C-130 Hercules. Of course, landing gear is made almost entirely of steel or aluminum. So, thanks to these new tariffs, American military procurers are either going to start getting hosed on their Héroux-Devtek contracts — or they're going to have start getting their landing gear overhauls from a U.S. company that isn't their first choice. Armoured personnel carriers “Canada and the US have been building military equipment for each other since the summer of 1940,” David Bercuson, a military historian at the University of Calgary, told the National Post. “Literally billions of dollars of such equipment has passed the border since then.” The most obvious example is the Stryker. There are nearly 5,000 Stryker armoured personnel carriers in the U.S. military, and all of them were built in London, Ontario. Not only that, but the Stryker is even based on a Canadian design, the LAV III. Coming in at a rock bottom $4 million apiece, the Americans use Strykers for everything: Ambulances, firefighting, missile platforms, chemical weapons defence and mine detection. They even started rigging them up with giant lasers to shoot down enemy drones. Armoured vehicles happen to be a Canadian specialty. While the United States was busy throwing money at big ticket items such as tanks and attack helicopters, the shoestring Canadians have gotten very good at the much cheaper task of simply strapping guns and armour to oversized trucks. And if a U.S. diplomat found themselves touring Iraq in an armoured Toyota Land Cruiser, chances are good they were shielded from bullets and IEDs by Canadian workmanship. Specialized aircraft Here again, the United States has it covered when it comes to big ticket aircraft such as fighters or bombers. But the U.S. military will occasionally call up Canadian plane-makers when it needs something quirky. Bombardier has retooled some of its airliners and business jets to act as airborne radar platforms. When the United States Army Parachute Team appears at air shows, they're jumping out of a Canadian-made de Havilland Twin Otter. De Havilland has also hooked up the Americans with some of its famously rugged prop planes for use in electronic warfare, remote cargo drops or simply moving National Guard troops around Alaska. All told, the U.S. military is flying more planes built in Canada than in any other foreign country. The U.S. military's only cargo drone (and it has the most Canadian name imaginable) A U.S. special forces unit is pinned down on a remote Central Asian mountaintop. Surrounded by militants on all sides, it needs an emergency airlift of water and ammunition to even see daybreak. Enter the SnowGoose, an unmanned autogyro specializing in precision deliveries to special forces. The SnowGoose is the U.S. military's only cargo drone, and it's an all-Canadian creation. An emerging theme on this list is that Canada is great at building niche military hardware for cheap, and the SnowGoose is no exception. As the drone's Stittsville, Ont. builders note, it can move cargo across a battlefield at a fraction of the price of other drones. Nuclear fuel Uranium is a big part of the modern U.S. military. It has more than 100 nuclear-powered vessels in the navy, and there's also those 7,000 atomic weapons it still has lying around. Canada has sold a whole lot of uranium to the U.S. military, going all the way back to the initial atomic bombs dropped on Hiroshima and Nagasaki in 1945. However, the taps were somewhat shut off in the 1960s, when Canada started limiting uranium exports to “peaceful” purposes. Still, with Canada ranking as the United States' top uranium dealer, we help keep their uranium topped up enough to have plenty left over for the military. Speaking of nuclear weapons, it might behoove the White House to remember that if a Russian or North Korean missile should happen to be fired in their direction, a Canada-based NORAD station will likely be among the first to let them know. Making fighter jets last forever This entry should fill thrifty Canadians with particular pride: We've gotten so good at squeezing every penny out of our CF-18s that we're now globally renowned experts at fighter jet life extension. Among other things, Canada invented “robotic shot-peening,” a method of using robots to restore aging aircraft with a precision never before known. The technology has been exported to Europe, Australia and, in 2013, the U.S. Navy brought in the Quebec aerospace company L-3 MAS to give its jets a makeover. Battlefield communications Tactical radios are another niche technology in which Canadian companies have a built a slow but steady reputation with the Americans. In a 2017 reporton Canada/U.S. military industrial cooperation, the Center for Strategic and International Studies noted that the U.S. military has been using Canadian radios since the 1960s. Ultra TCS, headquartered in Montreal, remains a supplier of tactical radios to both the U.S. Army and Marine Corps. And these aren't just walkie-talkies; they're hyper-advanced networks that can provide email, voice and even video hook-ups to American troops in battle. Jeeps That's right. The Second World War-era Willys Jeep — one of the most American vehicles in history — was manufactured in part by Canada. Ford Motor Company of Canada churned out thousands of Jeeps after the Second World War. In 1952 alone, Canadian factories were making an average of seven of them per day. According to Ford Canada's website, “these postwar Canadian-made Jeep were shipped to the United States, for the American military forces.” Space robots DARPA is the U.S. agency tasked with pursuing military so cutting edge that they occasionally veer into outright science fiction. Last year, DARPA signed a deal with Canada's MacDonald, Dettwiler and Associates to design robots that could be dispatched into space in order to repair U.S. military satellites. And like most times Canada is brought in for U.S. military stuff, the robot space mechanic program is indeed intended as a cost saving measure. Canada has been a leader in space defence for some time. Our beloved Canadarm, in fact, technically qualifies as an early military space robot. Over the course of the space shuttle program 11 missions were sent up to perform classified work for the Pentagon. We still don't know the specifics of what the Canadarm did for Uncle Sam on those missions, but the arm is a certifiable Cold Warrior. http://nationalpost.com/news/canada/security-threat-our-butt-here-are-just-some-of-the-ways-canadian-technology-keeps-americans-safe