US Air Force set to award $490M contract to counter small drones

Sur le même sujet

• 

  2 août 2019 | International, Aérospatial

  European Hypersonic Cruise Passenger Study Set For New Tests

  By Guy Norris A team of European hypersonic researchers are preparing for wind tunnel tests of a Mach 8 concept that is designed to prove technologies for the development of future ultra-long-range, high-speed commercial vehicles and air-breathing space launch systems. Funded under Europe's Horizon 2020 research and innovation program, Stratofly (Stratospheric Flying Opportunities for High-speed Propulsion Concepts) is targeted at fostering hypersonic capabilities for a 300-seat passenger vehicle cruising above 30 km (19 mi.) to TRL (technology readiness level) 6 by 2035. The project builds on the Lapcat waverider concept developed under earlier programs by the European Space Agency/European Space Research and Technology Center. Using the 310-ft.-long Lapcat II MR2.4 version as a reference vehicle, the 30-month Stratofly effort is focused on classic hypersonic technology challenges such as propulsion integration, hot structures and thermal management. In addition, with environmental concerns at the forefront in Europe, the project also includes sustainability considerations such as fuel-burn efficiency, noise and emissions reductions, as well as operational issues such as life-cycle costs, safety and certification. Coordinated by The Polytechnic University of Turin, Italy, the project team believes that sustainable hypersonic travel is feasible through the use of liquid hydrogen fuel and new trajectories that would enable flights from Europe to Australia in 3 hr. Specific targets include 75-100% CO2 reductions per passenger kilometer and 90% reductions in nitrous oxide (NOx) compared to current long-range transport aircraft. A version of the vehicle could also be adapted into the first stage of a two-stage-to-orbit space launch system, says the group. Other members of the 10-strong consortium include the von Karman Institute for Fluid Dynamics in Belgium, which is focused on propulsion and noise; the Netherlands Aerospace Center, NLR, which is also part of the noise study; and CIRA, the Italian aerospace research center, which is conducting high-speed flow analysis. Propulsion systems and climate impact input is provided by Germany's DLR research organization, while ONERA, the French aerospace research center, is focused on emissions as well as plasma-assisted combustion in the vehicle's combined-cycle propulsion system. Sweden's FOI defense research agency is also part of the plasma combustion study. The French National Center for Scientific Research is also evaluating the vehicle's potential climate impact, particularly in areas such as the effects of water droplets from the exhaust in the upper atmosphere. Studies of the overall business plan, human factors and hypersonic traffic management are being conducted by the Hamburg University of Technology, while the Spain-based Civil Engineering Foundation of Galicia is focused on structural analysis and optimization. Like the original Lapcat design, the Stratofly MR3 waverider configuration is dominated by a large elliptical inlet and an integrated nozzle aft located between two canted tail fins. For takeoff and acceleration up to Mach 4.5, the vehicle is powered by six air turbo ramjets (ATR, also known as air turbo rockets) in two bays of three, each fed by secondary inlets in the primary intake. Above this speed, sliding ramps cover the ATR inlets as the vehicle accelerates and transitions to a dual-mode ramjet/scramjet (DMR) for the next phase of the flight. The DMR is housed in the dorsal section, nested between the ATR ramjets, and is designed to operate in ramjet mode to above Mach 5 and scramjet mode up to Mach 8. The scramjet will incorporate a plasma-assisted combustion system to maintain the stability of the flame front and prevent the potential for flameouts. Tests of the plasma system in a combustor will take place later this year at ONERA, where supersonic combustion testing also took place for Lapcat. The tests will be conducted in November-December at ONERA's ATD5 facility and will focus on inlet conditions at Mach 3.7. Also planned for later this year is a test of the full vehicle in the high-enthalpy wind tunnel at DLR's Gottingen research facility. Testing at DLR will run through September 2020 and is expected to target similar free-stream conditions as those tested on Lapcat II—around Mach 7.8. The work will assess aerothermodynamic characteristics and be used to validate the results of earlier computational fluid dynamics analysis of the MR3 design, which incorporates external and internal differences against the reference vehicle. “We elevated the canard [a retractable feature for lower-speed flight] and redesigned the vertical tails,” says Davide Ferretto, a research assistant on the Stratofly team from The Polytechnic University of Turin. “We also redesigned the leading-edge radius of the inlet for increased efficiency as it feeds both propulsion systems.” As part of the redesign, the enclosed passenger compartment, which was divided into two sections running along each side of the vehicle, has been combined into a single cabin in the lower lobe of the fuselage. https://aviationweek.com/propulsion/european-hypersonic-cruise-passenger-study-set-new-tests

• 

  1 mai 2019 | International, C4ISR

  DARPA Tests Advanced Chemical Sensors

  DARPA's SIGMA program, which began in 2014, has demonstrated a city-scale capability for detecting radiological and nuclear threats that is now being operationally deployed. DARPA is building off this work with the SIGMA+ initiative that is focused on providing city- to region-scale detection capabilities across the full chemical, biological, radiological, nuclear, and explosive threat space. DARPA initiated a SIGMA+ pilot study last year known as ChemSIGMA to provide initial data and insights into how new chemical sensors using the existing SIGMA network would function. The chemical sensor package incorporates a chemical sensor, wind sensor and communications board into a weatherproof housing. Sensors report wind readings and real-time chemical information to a central cloud-hosted suite of fusion algorithms. “The algorithms were developed using a custom simulation engine that fuses multiple detector inputs,” said Anne Fischer, program manager in DARPA's Defense Sciences Office. “We built the algorithms based on simulant releases in a large metropolitan area – so we took existing data to build the algorithms for this network framework. With this network, we're able to use just the chemical sensor outputs and wind measurements to look at chemical threat dynamics in real time, how those chemical threats evolve over time, and threat concentration as it might move throughout an area.” In the pilot study, DARPA researchers from MIT Lincoln Laboratory, Physical Sciences Inc., and Two Six Labs, built a small network of chemical sensor packages. In partnership with the Indianapolis Metropolitan Police Department, Indianapolis Motor Speedway, and the Marion County Health Department, DARPA's performer teams deployed the network on-site at the Indianapolis Motor Speedway in late April 2018. The chemical sensor network and the data collected during events such as the 2018 Indianapolis 500 were critical to the DARPA effort, allowing the team to assess the performance of the sensors and network algorithms. These tests were conducted in an urban environment to ensure that the system could handle complex and stochastic signals from species that are ever present in a city's chemical background. Significantly, the network-level algorithm successfully improved system performance by correctly suppressing false detection events at the individual detector level. The group of DARPA researchers was also able to collect a large relevant data set and valuable user feedback that will guide ongoing system development efforts. Further testing with safe simulant/concert smoke at Indianapolis Motor Speedway, August 2018 During additional tests in August 2018, a non-hazardous chemical simulant was released in the empty Indianapolis Motor Speedway at a realistic threat rate. Concert fog was also released to serve as a visible tracer. The propagation of the visible tracer was observed in aerial photography, and ChemSIGMA sensors and algorithms determined the release location with unprecedented accuracy. The web-based ChemSIGMA interface allows the user to view alerts in real time across a variety of devices. Multiple trials were conducted over the course of several days assessing performance over a variety of meteorological conditions. Releases occurred during daytime and nighttime with a full range of wind directions and speeds. The ChemSIGMA prototype system detected all of the simulant releases and generated zero false alarms over the course of testing. Department of Defense simulant testing at Dugway Proving Ground, Utah, October 2018 “We're looking at how we might make this network more robust and more mature,” Fischer said. “For example, we implemented a network at Dugway Proving Ground as part of a DoD test for simulant releases, and have shown that the network can respond to a number of chemical simulant threats different than those used in Indianapolis, as well as built-in capabilities for mobile releases. Over the past few months, the team has used these data sets to further refine the algorithms, and plans to integrate and test them with the ChemSIGMA system in test events scheduled later this year.” The successful pilot and simulant test of the ChemSIGMA system at the Indy500 and Dugway Proving Ground provided valuable, relevant, and realistic data sets for validation and verification of the source localization and plume propagation algorithms. DARPA is currently extending the capabilities for networked chemical detection by advancing additional sensor modalities, including short-range point sensors based on techniques, such as mass spectrometry, and long-range spectroscopic systems. As these systems are further developed and matured, they will be integrated into the SIGMA+ continuous, real-time, and scalable network architecture to increase the system's capabilities for city-scale monitoring of chemical and explosive threats and threat precursors. https://www.darpa.mil/news-events/2019-04-30

• 

  18 février 2022 | International, Aérospatial, Naval, Terrestre, C4ISR, Sécurité

  Bruxelles veut renforcer l'industrie de défense européenne

  « Je note une véritable prise de conscience que nous devons faire plus ensemble pour construire une Europe de la Défense », a déclaré mardi Thierry Breton, Commissaire européen au Marché intérieur. La Commission a présenté mardi sa contribution au débat en suivant trois axes. D'abord le développement des achats en commun de matériels de défense, pour lequel les Vingt-Sept se sont fixés un objectif de 35%. Des achats communs ont de nombreux avantages, dont des économies d'échelle et une plus grande capacité d'exportation. Pour inciter les Etats membres à plus de collaboration, la Commission envisage des incitations fiscales via une exonération de la TVA, par exemple. Bruxelles réfléchit aussi à revoir le fonctionnement du Fonds européen de défense (FED), qui dispose d'une enveloppe de 7 Md€ sur la période 2021-2027. La Commission veut ensuite identifier les dépendances stratégiques de l'UE pour les réduire. Bruxelles veut inclure systématiquement l'industrie de la Défense dans les grandes initiatives industrielles (dans l'élaboration des normes, par exemple) et renforcer le filtrage des investissements directs de pays tiers. Enfin, la Commission veut protéger « les nouveaux espaces contestés » contre les menaces hybrides ; elle a déjà annoncé un prochain « Cyber Resilience Act » qui doit mettre en place des sortes de gardes-frontières de l'espace cyber européen. Les Echos du 16 février