14 novembre 2023 | International, Aérospatial, C4ISR

Sierra Nevada to supply US Army with intel-gathering jets in $554M deal

The U.S. Army is paying particular attention to what's known as deep sensing: the capacity to find, monitor, target and kill from greater distances.

https://www.c4isrnet.com/intel-geoint/isr/2023/11/14/sierra-nevada-to-supply-us-army-with-intel-gathering-jets-in-554m-deal/

Sur le même sujet

  • Japan commits to local F-35 production

    31 juillet 2020 | International, Aérospatial

    Japan commits to local F-35 production

    by Jon Grevatt The Japanese Ministry of Defense (MoD) has confirmed plans to continue the local production of Lockheed Martin F-35 Lightning II Joint Strike Fighter aircraft. The move reverses a decision in late 2018 to cease local production at Japan's final assembly and checkout (FACO) facility in Nagoya and instead focus on the localised maintenance, repair, overhaul and upgrade (MRO&U) of F-35s. That move was previously prompted by the high cost of building the F-35s at the facility. However, a spokesperson from the MoD told Janes that the new decision to continue building the aircraft at the Japanese FACO facility was influenced by the declining costs of producing the F-35 locally. Producing the aircraft locally, said the spokesperson, is now cheaper than importing the F-35 from the United States. The spokesperson was speaking to Janes nearly three weeks after the United States government approved a potential USD23 billion deal to sell Japan an additional 105 F-35s. This Foreign Military Sale means Japan will operate a total of 147 F-35s, becoming the second-largest operator of the aircraft in the world. These aircraft will comprise 105 conventional take-off and landing (CTOL) F-35A aircraft and 42 units of the short take-off and vertical landing (STOVL) F-35B. The spokesperson said, “For the acquisition of F-35As in fiscal years (FY) 2019 and 2020... the Japanese MoD has decided to use domestic manufacturing at the FACO... It is confirmed that the unit cost of aircraft produced at the domestic FACO [facility] is less, compared to the unit cost of imported aircraft.” https://www.janes.com/defence-news/news-detail/japan-commits-to-local-f-35-production

  • Northrop Grumman and Airbus Finalize Agreement on “Wing of Tomorrow” Program

    18 octobre 2018 | International, Aérospatial

    Northrop Grumman and Airbus Finalize Agreement on “Wing of Tomorrow” Program

    Agreement positions company for work on next generation composite manufacturing technology DULLES, Va. – Oct. 16, 2018 – Northrop Grumman Corporation (NYSE: NOC) announced today it has finalized a Cooperation and Research Agreement to work closely with Airbus on the Wing of Tomorrow program. The three-year agreement expands the current Northrop Grumman relationship with Airbus and explores complex composite wing stiffener forming automation with out-of-autoclave material systems through an investment in equipment, test articles and engineering support. This relationship positions Northrop Grumman for future potential high-rate production opportunities. “This agreement builds on Northrop Grumman's valuable working relationship with Airbus and its partners. Our work with Airbus is an important component of growth in the commercial aerospace structures business,” said Wendy Williams, vice president and general manager, aerospace structures, Northrop Grumman. “We are excited about the advanced composite manufacturing technology being developed to support the Wing of Tomorrow concept, and our team is eager to continue our long-term relationship with Airbus on their future endeavors.” Northrop Grumman is currently producing composite fuselage stringers and frames for the Airbus A350 XWB -900 and -1000 variants at its state-of-the-art Aircraft Commercial Center of Excellence facility in Clearfield, Utah. The company has successfully delivered more than 200,000 Airbus A350 parts since the inception of the program. Northrop Grumman's proprietary automated stiffener forming process has been instrumental in the development and manufacture of high-rate production composite stringers and frames that are extremely high quality, affordable and dimensionally precise. This technology will be evolved to the new material systems, geometries and processing needs of the future while maintaining the superior benefits of a highly automated production process. The Airbus Wing of Tomorrow program will address future aggressive aircraft production rates and the requirement for wings to be made faster and more affordably. The program will explore the best materials, manufacturing and assembly techniques, as well as new technologies in aerodynamics and wing architecture. New material experimentation represents a major part of the program, and lower-cost composite technologies currently being pursued could enable wing components to be produced with significantly reduced equipment and tooling costs, along with enabling a faster production cycle. Increased use of composite materials also opens up new possibilities in terms of wing configuration and construction. Northrop Grumman is a leading global security company providing innovative systems, products and solutions in autonomous systems, cyber, C4ISR, space, strike, and logistics and modernization to customers worldwide. Please visit news.northropgrumman.com and follow us on Twitter, @NGCNews, for more information. https://news.northropgrumman.com/news/releases/northrop-grumman-and-airbus-finalize-agreement-on-wing-of-tomorrow-program

  • At London arms fair, global war fears are good for business | Reuters

    17 septembre 2023 | International, Terrestre

    At London arms fair, global war fears are good for business | Reuters

    As Russia's Vladimir Putin and North Korean leader Kim Jong-un met this week to discuss what analysts believe will be a deal for an exchange of weapons, the West's leading companies were descending on Europe's biggest arms show in London.

Toutes les nouvelles