Retour aux nouvelles

23 juin 2020 | International, Terrestre

Rafael offers new multi-missile launcher for Poland’s tank-destroyer program

By:

JERUSALEM — Rafael Advanced Defense Systems has joined Poland's Ottokar-Brzoza tank-destroyer program, offering its line of anti-tank guided missiles for the country's ground forces.

Rafael would co-produce the weapons with Polish conglomerate Polish Armaments Group. The Israeli company unveiled a new multi-missile launcher laid out in a configuration of eight Spike non-line-of-sight missiles, which Poland could incorporate onto its BWP-1, a 1960s Soviet-era tracked armored vehicle, or its KTO Rosomak, a Polish variant of the Patria eight-wheel drive armored vehicle. Poland has hundreds of these vehicles in different variants, and wants to replace some aging ones for its anti-tank regiments.

Poland launched the competition to be prepared to confront a major threat, such as a mass amount of armored vehicles. The tender is potentially worth hundreds of millions of dollars if the country outfits a large number of its vehicles with launchers.

Rafael's NLOS launcher has a standoff range of 32 kilometers and is part of the company's Spike family of weapons, which is on more than 45 different platforms globally, according to the company.

Mounted on a fixed rail, the launcher's operator inside a vehicle uses a target consul and coordinates from a target bank or forward observer, such as a UAV. The missiles have a unique data link and do not need GPS to fly to their target. The passive surprise element of the missile (it does not use laser designators) makes it less likely the enemy will see the volley coming.

Other missiles, such as the MBDA Brimstone and Lockheed Martin's Hellfire, are also reportedly under consideration, and a variety of vehicle concepts with these weapons are available. These may include a launch station by Wojskowe Zakłady Motoryzacyjne; a chassis by OBRUM; a K9P chassis by Huta Stalowa Wola; the Borsuk tracked future armored vehicle; AMZ-Kutno's Bobr-3 vehicle; or Rheinmetall Defence's armored multipurpose vehicles.

Other Spike variants are already used by Poland, including the Spike LR and LR2. A 2015 order from Poland for 1,000 Spike missiles was estimated to be worth $150 million, and an earlier one in 2002 that was reportedly for thousands of missiles was worth about $250 million. The missile type is already produced in Poland by Mesko, which Rafael says provides an existing infrastructure “for the future Polish production of the SPIKE NLOS missile as well as the launchers.”

“As part of the its general vision and particularly now at this time of the COVID-19 pandemic, which has had a dramatic effect on all industries and economies, Rafael is continuously working to leverage industrial cooperation by contributing and operating with local industries,” the company said.

Poland wants to make a qualitative leap in tank-destroyer units, according to local reports, to put a stop to a potential invasion. This would likely require the country to buy the latest generation of armored vehicles, including those with active defense capabilities.

https://www.defensenews.com/land/2020/06/22/rafael-offers-new-multi-missile-launcher-for-polands-tank-destroyer-program/

Sur le même sujet

  • Contract Awards by US Department of Defense – October 20, 2020

    21 octobre 2020 | International, Aérospatial, Naval, Terrestre, C4ISR, Sécurité, Autre défense

    Contract Awards by US Department of Defense – October 20, 2020

    MISSILE DEFENSE AGENCY a.i. solutions Inc.,* Lanham, Maryland, is being awarded a $203,204,319 competitive, cost-plus-fixed-fee, level-of-effort contract with a three-year base value of $77,728,390 and two one-year options for quality and mission assurance advisory and assistance services. The work will be performed in the National Capital Region; Dahlgren, Virginia; Huntsville, Alabama; Kirtland Air Force Base, New Mexico; Fort Greely, Alaska; Orlando, Florida; Moorestown, New Jersey; Tucson, Arizona; Salt Lake City, Utah; Promontory, Utah; Joplin, Missouri; and other locations as directed, with an estimated completion date of December 2025. This contract was competitively procured via publication on the beta.SAM.gov website with two proposals received. Fiscal 2020 and 2021 research, development, test and evaluation; and Foreign Military Sales funds in the amount of $4,513,906 are being obligated at time of award. The Missile Defense Agency, Huntsville, Alabama, is the contracting activity (HQ0858-21-C-0010). NAVY Lockheed Martin Corp., Lockheed Martin Aeronautics Co., Fort Worth, Texas, is awarded a $138,769,282 modification (P00027) to previously awarded cost-plus-award-fee, cost-plus-incentive-fee contract N00019-19-C-0010. This modification adds scope to continue the development of pilot training device software to align the F-35 air system with continued capability development. Additionally, this modification provides for testing and continuous re-certification activities for dual capable F-35 aircraft as Block 4 capabilities are developed, matured and fielded in support of the Navy, Marine Corps, Air Force and non-Department of Defense (DOD) participants. Work will be performed in Orlando, Florida (51%); and Fort Worth, Texas (49%), and is expected to be completed in June 2024. Fiscal 2020 research, development, test and evaluation (Air Force) funds in the amount of $4,623,119; fiscal 2020 research, development, test and evaluation (Navy) funds in the amount of $3,325,900; and non-DOD participant funds in the amount of $1,071,980 will be obligated at time of award, none of which will expire at the end of the current fiscal year. The Naval Air Systems Command, Patuxent River, Maryland, is the contracting activity. L3 Technologies Inc., Global Communications Solutions Division, Victor, New York, is awarded a firm-fixed-price, indefinite-delivery/indefinite-quantity contract with a ceiling of $87,712,000 for the purchase of up to a maximum 169 production Marine Corps Wideband Satellite – Expeditionary systems. Work will be performed in Rochester, New York, and is expected to be complete by October 2025. Fiscal 2020 procurement (Marine Corps) funds in the amount of $20,673,900 will be obligated on the first delivery order immediately following contract award and funds will not expire at the end of current fiscal year. This contract was competitively procured via the beta.sam.gov website, with four offers received. The Marine Corps Systems Command, Quantico, Virginia, is the contracting activity (M67854-21-D-2025). Technology Security Associates Inc.,* California, Maryland, is awarded an $83,287,546 cost-plus-fixed-fee, indefinite-delivery/indefinite-quantity contract. This contract provides a full range of platform security and related support services to include, security modeling, program security management, trusted systems and network, cybersecurity, anti-tamper, system security engineering, international programs security support, acquisition security support, communications security support and physical security, force protection, anti-terrorism, and emergency management support for the Naval Air System Command and the Naval Air Warfare Centers. Work will be performed at Patuxent River, Maryland (90%); St. Inigoes, Maryland (2%); Lakehurst, New Jersey (2%); Orlando, Florida (1%); China Lake, California (1%); Point Mugu, California (1%); North Island, California (1%); Cherry Point, North Carolina (1%); and Jacksonville, Florida (1%), and is expected to be completed in October 2025. No funds will be obligated at the time of award; funds will be obligated on individual orders as they are issued. This contract was competitively procured as a small business set-aside; two offers were received. The Naval Air Warfare Center, Aircraft Division, Patuxent River, Maryland, is the contracting activity (N00421-21-D-0005). Lockheed Martin Corp., Fort Worth, Texas, is awarded a $12,663,878 modification (P00088) to previously awarded cost-plus-fixed-fee contract N00019-16-C-0033. This modification adds scope in support of the F-35 Lightning II Lot 11 diminishing manufacturing sources redesign of the Electrical Optical Targeting System, 270V Battery Cell Separator and a component for the Helmet Mounted Display System for Navy, Marine Corps, Air Force and non-Department of Defense (DOD) participants. Work will be performed in Fort Worth, Texas, and is expected to be completed in January 2024. Fiscal 2020 aircraft procurement (Navy) funds in the amount of $5,198,654; fiscal 2019 aircraft procurement (Air Force) funds in the amount of $5,198,654; and non-DOD participant funds in the amount of $2,266,570 will be obligated at time of award, none of which will expire at the end of the current fiscal year. The Naval Air Systems Command, Patuxent River, Maryland, is the contracting activity. AIR FORCE Privoro, Tempe, Arizona, has been awarded a $37,100,000 firm-fixed-price agreement for prototyping and pilot work to support the establishment of a trusted platform for secure mobility that will bring the advantages of commercial mobile technology to government agencies. Work will be performed in Phoenix, Arizona, and is expected to be completed Aug. 1, 2024. Fiscal 2019 and 2020 research, development, test and evaluation funds in the amount of $2,668,000 are being obligated at the time of award. The Air Force Research Laboratory, Dayton, Ohio, is the contracting activity (FA8650-19-9-9333). U.S. SPECIAL OPERATIONS COMMAND Trofholz Technologies Inc., Rocklin, California, was awarded a $15,000,000 maximum single award, indefinite-delivery/indefinite-quantity contract (H92240-21-D-0001) with an ordering period of up to five years for contractor-provided non-personal Integrated Electronic Security System services in support of Naval Special Warfare Command (NSWC) enterprise requirements. Fiscal 2021 operations and maintenance funds in the amount of $145,899 are being obligated at the time of award. The work will be performed in various locations inside and outside the U.S. and may continue through fiscal 2026, depending on timing of orders placed by NSWC. The contract was awarded competitively using Federal Acquisition Regulation Part 15 procedures with four proposals received. NSWC, Coronado, California, is the contracting activity. ARMY Sikorsky Aircraft Corp., Stratford, Connecticut, was awarded a $13,739,845 modification (P00152) to contract W58RGZ-17-C-0009 for one UH-60M Black Hawk helicopter. Work will be performed in Stratford, Connecticut, with an estimated completion date of Nov. 30, 2020. Fiscal 2010 Foreign Military Sales (Jordan) funds in the amount of $13,739,845 were obligated at the time of the award. U.S. Army Contracting Command, Redstone Arsenal, Alabama, is the contracting activity. DEFENSE LOGISTICS AGENCY Oshkosh Defense LLC, Oshkosh, Wisconsin, has been awarded an $11,340,637 firm-fixed-price, requirements-type contract for tire and wheel assemblies. This was a competitive acquisition with one offer received. This is a three-year contract with no option periods. Locations of performance are Wisconsin and New Jersey, with an Oct. 20, 2023, ordering period end date. Using military service is Army. Type of appropriation is fiscal 2021 through 2024 Army working capital funds. The contracting activity is the Defense Logistics Agency, Land and Maritime, Warren, Michigan (SPRDL1-21-D-0004). *Small business https://www.defense.gov/Newsroom/Contracts/Contract/Article/2388282/source/GovDelivery/

  • The military is building a space plane. Now it looks to have an engine up to the task

    17 juillet 2018 | International, Aérospatial

    The military is building a space plane. Now it looks to have an engine up to the task

    By SAMANTHA MASUNAGA A decade after the U.S. Air Force commissioned the next generation of GPS satellites, the first of these spacecraft is finally set to launch into orbit later this year. As with other national security missions, a roughly 200-foot-tall rocket will blast the massive satellite to space, fulfilling a contract worth more than $80 million. But as nations develop technology to disable or shoot down satellites — as China did to one of its own satellites with a ground-based ballistic missile in 2007 — the U.S. military has started to look at options for rapidly and cheaply launching smaller crafts into space. An experimental program spearheaded by a Pentagon research agency could eventually be part of that solution. The Defense Advanced Research Projects Agency, along with aerospace giant Boeing Co., is developing a reusable spaceplane expected to launch small satellites 10 times in 10 days. The vehicle's first test flight is set for 2021, which hints at the Defense Department's growing interest in reusable rocket technology, particularly its potential to drive down launch costs and speed up turnaround time. In recent weeks, the spaceplane's rocket engine, known as the AR-22, completed 10 test fires in 240 hours without need for refurbishments or major repairs, said Jeff Haynes, program manager at Aerojet Rocketdyne. The test firing took place at NASA Stennis Space Center in Mississippi from June 26 to July 6. The engine test is “really good progress,” said Claire Leon, director of Loyola Marymount University's graduate program in systems engineering and former director of the launch enterprise directorate at the U.S. Air Force's Space and Missile Systems Center. “SpaceX has had its success,” she said. “I think this engine test also demonstrates that other companies are doing the technology development and having success that will enable reusability.” The title of first reusable system belongs to NASA's Space Shuttle, though more recently, several commercial space firms, including Microsoft co-founder Paul Allen's Stratolaunch and British billionaire Richard Branson's Virgin Orbit, have developed systems that would reuse aircraft to launch satellites from the belly of a plane. https://www.stripes.com/news/the-military-is-building-a-space-plane-now-it-looks-to-have-an-engine-up-to-the-task-1.538009

  • Boeing, Northrop Grumman Join Group Pushing 3D Printing to Small Suppliers

    18 août 2022 | International, Aérospatial

    Boeing, Northrop Grumman Join Group Pushing 3D Printing to Small Suppliers

    The White House-backed compact is also part of an effort to make supply chains more resilient.

Toutes les nouvelles