5 septembre 2019 | International, Aérospatial
KIELCE, Poland, Sept. 4, 2019 /PRNewswire/ -- During the MSPO International Defence Industry Exhibition, PZL Mielec, a Lockheed Martin company (NYSE: LMT) displayed an S-70i™ Armed Black Hawk® helicopter fitted with a single-station external stores pylon. Designed at PZL Mielec as a lighter weight, lower cost alternative to currently fielded dual-station external wings, a single-station pylon attached to one or both sides of the aircraft will be compatible with the advanced weapon system that allows Black Hawk pilot gunners to support battlefield operations using forward firing guns, rockets and air-to-ground missiles.
"We're developing the single-station pylon in response to requests by militaries across Europe, Latin America and Asia for a battlefield support helicopter that can be armed for different types of missions that may not always need four weapons stations," said Janusz Zakręcki, president, general director of PZL Mielec. "Operators can arm the aircraft for suppressive fire, surveillance, armed reconnaissance, armed escort and air assault missions, and still carry out other utility roles whenever pylons and stores must remain on the aircraft."
At a quarter the cost and weight of a dual-station wing, a pylon can be removed or attached by two people in 15 minutes, produces less drag during flight, offers a wider field of fire to window or door gunners, and opens more space to hoist a litter into the aircraft while in a hover.
For large targets, a pylon will be able to carry HELLFIRE™ or Spike air-to-ground missile launchers. A pylon also can extend aircraft range with an 80-gallon external fuel tank.
As a complementary option for the S-70i / S-70M Armed Black Hawk with dual-station wings, the single station pylon will integrate with the aircraft's weapons management system that calculates the range and complex ballistics required for pilot gunners to engage targets with high accuracy and reliability from stand-off distances during day and night operations.
PZL Mielec expects to begin airworthiness flight testing of the prototype pylon design in 2020.
About Lockheed Martin
Headquartered in Bethesda, Maryland, Lockheed Martin is a global security and aerospace company that employs approximately 105,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services.
16 décembre 2024 | International, C4ISR, Sécurité
Malvertising campaign DeceptionAds exploited 3,000+ sites, delivering 1M+ daily impressions via fake CAPTCHA redirects, leading to account and financi
9 octobre 2018 | International, Terrestre
By: Jen Judson WASHINGTON — The Lynx 41 infantry fighting vehicle made its public debut in the springtime drizzle at a Parisian land warfare exposition in June this year. German defense company Rheinmetall took pains to show its vehicle on scene was not a mock-up, but a real vehicle that came with available footage of its rigorous test campaigns. Ben Hudson, the head of the company's vehicle systems division, told Defense News at the expo that Rheinmetall was “highly interested” in the U.S. Army's Next-Generation Combat Vehicle program, and said to stay tuned on how Lynx might break into the U.S. market as a serious competitor for NGCV. Fast-forward four months, and Rheinmetall has found a high-profile partner in Raytheon to bring Lynx to the U.S. They will participate in what is shaping up to be a competitive prototyping effort with the NGCV program, to replace the Bradley Infantry Fighting Vehicle with an Optionally Manned Fighting Vehicle. Developing a family of next-generation combat vehicles is a top priority of the U.S. Army as part of its modernization strategy focused on multi-domain operations. In fact, it's the second highest priority, underneath bringing Long-Range Precision Fires into the force. “We knew we wouldn't be able to compete for a program as prestigious and large in the U.S. without a strong U.S. partner,” Hudson told Defense News in an interview leading up to the Association of the United States Army's annual conference. “Since Eurosatory, we have been working through that.” The partnership gets after “essentially the best of both of our companies,” Hudson said. It “brings together the world's leading infantry fighting vehicle technology, the vehicle and turret from Rheinmetall,” with Raytheon's capabilities from a systems integration standpoint, he said. “A lot of the gaps that we had in our business to really create that next-generation solution are easily covered by the strengths and capabilities Raytheon has, and some of those things are electronic warfare, signals intelligences, missiles capabilities ... and sensor systems like the third-generation FLIR that are a key plan of the Army going forward,” Hudson said. To bring on Raytheon's technology, the vehicle won't have to be changed much because it was designed from day one to be modular and adaptable. In fact, the company switched configurations at Eurosatory to a hybrid command variant in a matter of hours. The vehicle will be “a U.S. product, U.S. made and, ultimately, we will move to a U.S. engineered platform,” Hudson said. The fact that the Army is ready to dive head first into replacing the Bradley, with plans to have companies compete for a chance to rapidly build prototypes for the OMFV program, makes the partnership with Rheinmetall attractive, said Kim Ernzen, Raytheon's vice president of land warfare systems. Because Lynx already “exists, that is one of the most compelling pieces to this relationship,” she said. But Raytheon and Rheinmetall also share the same philosophies when it comes to company culture and innovation and “how we look at technology that comes to play not only today but, more importantly, has that growth path for the future,” Ernzen said. This aligns with the Army's path to get a next-gen combat vehicle to the field quickly but continue to evolve its technical capabilities to keep pace with evolving threats. This isn't the first time Raytheon and Rheinmetall have partnered on programs. Most recently, the pair unveiled an integrated suite of air-defense capabilities they think could meet the entire portfolio of German air-defense needs, going up against Germany's current development plans to buy a missile defense system from Lockheed Martin. And the duo has also worked to integrate Raytheon's Patriot air-and-missile defense system on Rheinmetall trucks for an unnamed Scandinavian country, among several other efforts. The impact of emerging threats and new requirements drove Rheinmetall to build Lynx to fill a gap in the market. Defeating today's and tomorrow's threats means having a vehicle that weighs well above 50,000 kilos — or more than 110,200 pounds — or one that is rapidly reconfigurable to support different missions. The Lynx KF41 with a Lance 2.0 turret “rebalances the key requirements in the areas of survivability, mobility, lethality, capacity, adaptability and transportability,” Hudson said in June, and is reconfigurable using open-architecture systems and a modular and open mechanical architecture. The vehicle design is “highly scalable,” Hudson said, with more than 18,000 kilos, or more than 39,000 pounds, of reconfigurable payload and an internal volume that allows for the turret and up to nine seats in the back. The new vehicle is fitted with an 850-kilowatt power pack that uses the Liebherr engine and Renk transmission. Additionally, in order to power the digital backbone and all the other weapons systems, more than 20 kilowatts of electrical power is stored on board. The turret also has two flexible mission pods on either side, to allow customizable subsystems such as anti-tank guided missiles, non-line-of-sight loitering munitions, UAVs or an electronic warfare package. Raytheon will provide the third-generation FLIR, fielded on Abrams tanks and also meant for the Bradley A5 upgrade, which has since been canceled to make way for the OMFV. The company also plans to provide other sensor suites, particularly an active protection system that is already being developed and built to be compliant with the Army's future APS system. While Rheinmetall has its own APS — the Active Defense System — that it's been trying to break into the U.S. market as an interim solution for combat vehicles now, the company sees Raytheon's APS offering as “unparalleled” and the plan is to incorporate the capability into the offering. Raytheon and Rheinmetall plan to submit a proposal when the Army's draft request for proposals drops — potentially as soon as this month, but it could slip to November or December, according to Ernzen. Proposals are due in May. The Army plans to follow a similar procurement route as it did with the Armored Multi-Purpose Vehicle and downselect to two competitors who will build 14 prototypes in an engineering and manufacturing development phase in the first quarter of fiscal 2020. https://www.defensenews.com/digital-show-dailies/ausa/2018/10/08/raytheon-rheinmetall-partner-to-offer-new-lynx-fighting-vehicle-to-us-army
4 février 2020 | International, Aérospatial
Tucson will become the new headquarters for a combined business unit made up of Tucson-based Raytheon Missile Systems and a Massachusetts-based Raytheon business when parent Raytheon Co. and United Technologies Corp. finalize their merger. A Raytheon Missile Systems spokesman confirmed Friday that Tucson will become headquarters for the new Raytheon Missiles & Defense business, which will combine Missile Systems and Raytheon Integrated Defense, now headquartered in Tewksbury, Massachusetts. “We shared with our employees that upon merger close, our consolidated businesses will be named Raytheon Missiles & Defense and Raytheon Intelligence & Space," Raytheon spokesman John Patterson said. "They'll be headquartered in Tucson, Arizona and Arlington, Virginia respectively. We look forward to sharing more information once the merger closes — anticipated early in the second quarter of this year.” Raytheon — Southern Arizona's largest employer — announced in late October that Wes Kremer, president of Raytheon Missile Systems since last March, will become president of the combined missile and integrated defense unit as part of the merged parent company, which will be called Raytheon Technologies Corp. Raytheon Intelligence & Space will be formed from Raytheon's Space and Airborne Systems and Intelligence, Information and Services units, and UTC Mission Systems and Raytheon's Forcepoint cybersecurity unit. Together with two of UTC's current businesses — engine maker Pratt & Whitney and Collins Aerospace — they will form the four main business units of the merged company. But the company said it would not announce the headquarters location of the new business units until the merger was finalized. The so-called "merger of equals" will create an aerospace and defense behemoth with annual revenues of $74 billion, second only to Boeing in the industry. Raytheon and United Technologies shareholders have approved the merger of the two companies, which is also contingent on United Technologies' successful spinoff of its Carrier heating, ventilation and air-conditioning business and its Otis Elevator subsidiary. The deal is also subject to federal anti-trust approval, which is expected after the Defense Department said it had few concerns about the merger. Raytheon is the Tucson region's largest employer with about 13,000 local workers. The company has been working to expand its campus at Tucson International Airport amid a plan to add more than 2,000 jobs. Raytheon also has significant operations at the University of Arizona Tech Park. The company makes many of the nation's front-line defense systems, including the Tomahawk cruise missile and the Standard Missile series of ship-defense and ballistic missile interceptors, and more recently has been working on hypersonic missiles and laser weapons to defeat drones and other threats. https://tucson.com/news/local/raytheon-chooses-tucson-for-headquarters-of-combined-missiles-defense-unit/article_ee884dfe-4489-11ea-8617-6b5185c6107b.html