Retour aux nouvelles

7 août 2020 | International, Aérospatial

Pilots try out new helmet in F-16V flight tests

JERUSALEM — Recent flight tests of the F-16V fighter jet incorporated a new version of the pilot's helmet that introduces a visor with optical inertial trackers and is designed to provide improved durability, accuracy and comfort for long flights.

The Joint Helmet Mounted Cueing System II is manufactured by Collins Elbit Vision Systems, a joint venture between Collins Aerospace and Elbit Systems of America.

The flight tests followed a safety qualification test for the helmet last year meant as a step toward making the JHMCS II the baseline helmet for the F-16 Fighting Falcon Viper (V) Block 70/72, made by Lockheed Martin. The safety test was performed on the ground, and the helmet was subjected to wind blasts.

Jeff Hoberg, a co-general manager with the joint venture, said the helmet was specifically created for aircraft like the F-16V and builds on the legacy of the earlier JHMCS variants used on F-15, F-16 and F-18 jets.

With an optical inertial tracker, the JHMCS II is more accurate than previous models, and its improved center of gravity mitigates pilot fatigue, as the helmet aligns better with the spine, Hoberg said. The optical tracking is made possible by upgrades to algorithms and software, the placement of a tracking part on the front of the helmet above the eyes, and a reference unit on the dashboard console of the aircraft.

“Likewise it has a color display, and when you add color to the display, air crew can absorb more information,” he added.

The next step for the helmet, Hoberg explained, is to continue flight tests this year and through early next year, with the expectation that the new variant will be certified as the baseline helmet for the F-16V. The JHMCS II is the only helmet-mounted display integrated and tested on the F-16V.

“Flight tests is the next milestone as we partner with Collins Elbit Vision Systems on the JHMCS II, and we look forward to continued collaboration,” said Danya Trent, vice president of the F-16 program at Lockheed.

The F-16V aircraft, equipped with an active electronically scanned array radar, are part of a new Lockheed production line in Greenville, South Carolina, announced last year. The company said in a 2019 interview that it expected hundreds of aircraft to be upgraded to the Viper model and up to 500 more to be sold in the next decade, with F-16s estimated to be keep flying into the 2040s. The fourth-generation “V” model first flew in 2015 and is going through a flight test phase. F-16V sales and upgrades to the variant are in the works for Taiwan, Bahrain and Bulgaria, among other countries.

https://www.c4isrnet.com/battlefield-tech/2020/08/06/pilots-try-out-new-helmet-in-f-16v-flight-tests/

Sur le même sujet

  • DARPA contract aims to design circuits in months, not years

    20 septembre 2018 | International, Aérospatial, C4ISR

    DARPA contract aims to design circuits in months, not years

    By: Brandon Knapp The Defense Advanced Research Agency announced an $8 million contract modification for the University of Southern California's Information Sciences Institute to work on a program that develops circuits that be quickly adapted rather than wholesale reinvented. The work is part of DARPA's Circuit Realization at Faster Timescales (CRAFT) research program. The modification brings the total value of the contract to $28 million, according to a Sept. 17 announcement from the Pentagon. The program is designed to dramatically shorten the design cycle and the expense numbers for custom integrated circuits, which are essential in a wide variety of military equipment such as drones and tactically useful 3D imagery production. Currently, it can cost up to $100 million and take more than two years to design these circuits, according to a DARPA release. The CRAFT program aims to cut that timeline down to a matter of months. “Reducing the time and cost for designing and procuring custom, high-efficiency integrated circuits, should drive more of those in the DoD technology community toward best commercial fabrication and design practices,” CRAFT program manager, Dr. Linton Salmon in a program information release. “A primary payoff would be a versatile development environment in which engineers and designers make decisions based on the best technical solutions for the systems they are building, instead of worrying about circuit design delays or costs.” Work will be performed by USC in Marina Del Ray, California, with an expected completion date of December 2019. DARPA has been working on the program since 2015. https://www.c4isrnet.com/industry/2018/09/19/darpa-contract-aims-to-design-circuits-in-months-not-years

  • BAE Tempest : la possible participation japonaise

    29 octobre 2021 | International, Aérospatial

    BAE Tempest : la possible participation japonaise

    Le Japon pourrait devenir partenaire au sein du team Tempest, lequel devrait voir une évolution sous forme de contrats avec les principaux partenaires à savoir la Suède et l'Italie d'ici la fin de cette année. BAE Systems avait déjà proposé ses compétences dans le cadre de l'étude du F-X japonais, le successeur du F-2.

  • Ares, la PME française qui rachète les Mirage du Qatar

    19 novembre 2021 | International, Aérospatial

    Ares, la PME française qui rachète les Mirage du Qatar

    Cette société aéronautique, implantée dans le sud-est de la France, vient de conclure le rachat au Qatar de 12 Mirage 2000-5 d'occasion, afin de développer le marché du « Red Air » en Europe. Soit l'entraînement des forces armées par des flottes privées.

Toutes les nouvelles