29 mars 2019 | Local, Naval

No need to lengthen Type 26 warship to meet Canada’s needs, says DND

DAVID PUGLIESE, OTTAWA CITIZEN

Industry representatives have been talking about the possibility that the Type 26 design will need to be altered significantly to meet Canadian requirements. There have been suggestions that the length of the ship will have to be increased by 10 metres to better accommodate a Canadian crew size. Questions about such a possibility were even raised by MPs at a Commons defence committee meeting last month.

But the Department of National Defence says there's nothing to such claims. DND spokeswoman Ashley Lemire points out that Lockheed Martin's proposal, based on the BAE Type 26, meets the requirements outlined in the Canadian government's request for proposal. “Therefore, there is no need to lengthen the proposed design to meet Canada's requirements,” she said.

DND procurement chief Pat Finn also faced similar questions from Conservative MPs during the Commons defence committee meeting last month. The Conservatives raised concerns about about whether the Type 26 had the speed or size to meet Canadian requirements. MPs also asked questions about whether the cost of the Canadian Surface Combatant program was increasing from $60 billion-$65 billion to $77 billion. Finn said there are no issues on speed or size for the Type 26. “The requirement for the Canadian Surface Combatant set standards for speed, berths, etc., so there's no cost increase to the bid because of speed or berth,” Finn explained to MPs. “There's been no documentation prepared and nothing has come across my desk that says there's a cost increase to $77 billion.”

https://ottawacitizen.com/news/national/defence-watch/no-need-to-lengthen-type-26-warship-to-meet-canadas-needs-says-dnd

Sur le même sujet

  • Evolving battlespace triggers training innovation

    4 février 2019 | Local, Autre défense

    Evolving battlespace triggers training innovation

    BY ROBIN BILLINGHAM © 2019 FrontLine (Vol 16, No 1) The global shift to full-spectrum warfare and in-and-out mission fighting have given rise to an evolution in training requirements and methodologies. Previous training technologies were helpful in many ways, including cost savings on operational equipment, but were limited in scope and time-consuming to prepare. Innovative developers have now taken the simulation option to the next level. Digitally-simulated training environments can enhance a soldier's real-time decision-making abilities and improve the likelihood of mission success when confronted by an unconventional enemy – and that was the aim of previous generation technologies. Significant cost-savings are also achieved through these training systems and is a major reason why they have been widely implemented. The evolution of large scale digital training exercises developed quite rapidly once it became feasible to exercise without the huge expense of sending brigades or divisions into the field. Soon, digital exercises were set up to improve responses and efficiencies for all aspects relating to the warfighting effort. Exercise Unified Resolve was initiated in 2012 and has become an annual computer-assisted exercise designed to test command and control capabilities within the Canadian Army. Speaking about Unified Resolve back in 2016, Brigadier-General Trevor Cadieu noted the criticality of simulation exercises for the leadership of the brigade. “It allows us to stress test some of our planning and procedures without needing to pull 4,000 troops into the field, away from their families and other duties,” said then-Commander of 1 Canadian Mechanized Brigade Group. Full article: https://defence.frontline.online/article/2019/1/11101-Evolving-battlespace-triggers-training-innovation

  • Eurosatory 2018: Rheinmetall Canada unveils production-ready Mission Master Cargo unmanned ground vehicle

    12 juin 2018 | Local, Terrestre

    Eurosatory 2018: Rheinmetall Canada unveils production-ready Mission Master Cargo unmanned ground vehicle

    Rheinmetall Canada has unveiled a newly named Mission Master Cargo unmanned ground vehicle (UGV), which is a new version of the Multi-Mission UGV that was first revealed at IDEX in February 2017. The platform is designed for direct support of dismounted troops and is available in a cargo and casualty evacuation version, and a surveillance and reconnaissance version. The new UGV was revealed during Eurosatory 2018 in Paris, and Rheinmetall Canada spoke to Jane's prior to the event. Modules can be swapped in and out as required, so the UGV can fulfil mission sets including logistics support; weaponised; chemical, biological, radiological, and nuclear and explosives (CBRNE); and communications relay. “The end user can buy either a surveillance module, CBRN module or fire suppression module and clip it onto the vehicle itself with no modification required. The software can integrate and interact with any of those mission modules that are already embedded into every single UGV,” Alain Tremblay, vice-president of business development for Rheinmetall Canada, told Jane's. In the weaponised role, the platform is fitted with a remote weapon station featuring a 12.7 mm machine gun. Live fire testing was done at the end of 2017 on a military base in Canada to trial how the UGV could lock onto a target, the target then be confirmed by operators, and the platform fire by itself up to a range of 800 m. Tremblay noted that any type of remote weapon station, regardless of the manufacturer, can be fitted to the platform. “The open architecture of the software allows anything to be mounted, even a Russian type missile which has a different architecture system to the western world,” he said. “Early next year we are going to be starting to work on a medium calibre 20 mm remote weapon station for the same platform which is actually not that difficult to do. http://www.janes.com/article/80789/eurosatory-2018-rheinmetall-canada-unveils-production-ready-mission-master-cargo-unmanned-ground-vehicle

  • In pursuit of $19B contract, Sweden's Saab offers to build fleet of fighter jets in Canada

    31 mai 2019 | Local, Aérospatial

    In pursuit of $19B contract, Sweden's Saab offers to build fleet of fighter jets in Canada

    David Pugliese, Ottawa Citizen Saab's offer further ups the ante on the competition that will see the federal government purchase 88 new aircraft A Swedish aerospace firm that hopes to supply Canada's new fleet of fighter jets says it could build the aircraft in this country, making maximum use of the expertise of domestic firms and creating high-tech jobs. Saab's pitch to build its Gripen E fighter jet in Canada further ups the ante on the $19-billion competition that will see the federal government purchase 88 new aircraft. The Liberal government has been emphasizing the transfer of new technology and expertise to Canadian aerospace firms as well as the creation of high-tech jobs as among its key goals for the fighter jet program. Another European firm, Airbus, has hinted it could also build its Typhoon fighters in Canada, but Saab said if the federal government wants the planes built on a domestic production line its commitment is solid. For the Canadian program, Saab is hoping to follow the same process that helped it win a recent fighter jet competition in Brazil. The first batch of Gripen E fighter jets are being built in Sweden but the technology is then being transferred to Brazilian firms so they can assemble the remaining aircraft. Certainly if that is what the customer values for Canada that is something that we can easily do “We think that is the model that makes sense for Canada,” Patrick Palmer, senior vice-president of Saab Canada, told Postmedia. “We're going down that path but we're also looking at how the (request for proposals) is written and what the customer values. Certainly if that is what the customer values for Canada that is something that we can easily do.” Aerospace firms have been told that the federal government will request their proposals in mid-July. The fighter jet competition was launched on Dec. 12, 2017 and at this point four aircraft are to be considered. Those include the F-35, the Super Hornet, the Eurofighter Typhoon and the Gripen. The Gripen E is the newest of the fighter jets being offered to Canada. The first Gripen E for the Swedish military is expected to be delivered later this year. The first of the 36 aircraft ordered by Brazil in a $5-billion program will be delivered in 2021. The first delivery of jets for the Canadian program is expected in the mid-2020s with the full capability available in the early 2030s, according to documents produced by the Department of National Defence. The issue of industrial benefits for Canadian companies will have a high profile in the competition. In early May the Canadian government told potential bidders it was making changes to its fighter jet competition to allow the U.S. to enter the F-35 stealth fighter. The changes, which industry sources say allow for a more flexible approach in determining the value of industrial benefits for the competition, came after a series of discussions with the U.S. government and threats by the Pentagon to withdraw the F-35 from consideration. Canada is a partner nation in the development of Lockheed Martin's F-35, and U.S. officials had warned that the agreement Canada had signed prohibits partners from imposing requirements for industrial benefits as firms from those nations compete for work on the jets. Over the last 12 years, Canadian firms have earned more than $1.3 billion in contracts to build F-35 parts. Per Alriksson of Saab Aeronautics said the Gripen is designed specifically for operations in the Arctic, giving it a leg up on other planes. “Sweden has air force bases in what you call the far North,” he added. “We operate there daily. (The Gripen) has Arctic DNA built into it.” Alriksson said the Gripen E can operate from remote airfields in the north, landing and taking off on runways less than 800 metres in length. It has a quick turnaround time for missions, with technicians able to reload and refuel the planes in 10 minutes. “It is pretty good in operating in dispersed locations as you have in Canada,” he added. Alriksson said the company can integrate U.S. and other equipment on the Gripen E so it is interoperable with American forces, another consideration for Canada. “Moving forward with the Gripen E, we see no problem whatsoever to integrate that fighter into a NORAD context.” https://nationalpost.com/news/in-pursuit-of-19b-contract-swedens-saab-offers-to-build-fleet-of-fighter-jets-in-canada

Toutes les nouvelles