28 septembre 2018 | International, Aérospatial

LOCKHEED MARTIN SELECTS HARRIS CORPORATION TO DELIVER F-35'S NEXT GENERATION COMPUTER PROCESSOR

Supply Chain Competition Continues to Reduce Cost and Enhance Capability

FORT WORTH, Texas, Sept. 27, 2018 /PRNewswire/ -- Lockheed Martin (NYSE: LMT) has selected Harris Corporation (NYSE: HRS) to develop and deliver the next generation Integrated Core Processor (ICP) for the F-35 fighter jet. The Lockheed Martin-led competition within the F-35 supply chain will significantly reduce cost and enhance capability.

The F-35's ICP acts as the brains of the F-35, processing data for the aircraft's communications, sensors, electronic warfare, guidance and control, cockpit and helmet displays.

"We are aggressively pursuing cost reduction across the F-35 enterprise and, after conducting a thorough review and robust competition, we're confident the next generation Integrated Core Processor will reduce costs and deliver transformational capabilities for the warfighter," said Greg Ulmer, Lockheed Martin vice president and general manager of the F-35 program. "The next generation Integrated Core Processor for the F-35 will have positive benefits for all customers in terms of life cycle cost, capability, reliability and more."

The new Integrated Core Processor is a key element of the planned "Technology Refresh 3" modernization that takes advantage of fast evolving computing power to ensure the advanced F-35 remains ahead of evolving threats. Additional elements in the tech refresh include the Panoramic Cockpit Display Electronic Unit and Aircraft Memory System, which were also recompeted and awarded to Harrislast year.

Reduce Costs, Increased Performance

The Harris-built ICP will be integrated into F-35 aircraft starting with Lot 15 aircraft, expected to begin deliveries in 2023. The next generation ICP system is targeted to generate the following results compared to the current system:

  • 75 percent reduction in unit cost
  • 25 times increase in computing power to support planned capability enhancements
  • Greater software stability, higher reliability, and increased diagnostics resulting in lower sustainment costs
  • An Open System Architecture to enable the flexibility to add, upgrade and update future capabilities

"The new F-35 ICP will pave the way for system scalability well into the future," said Ed Zoiss, president, Harris Electronic Systems. "Open systems are the future of avionics and Harris has invested substantial R&D to deliver more affordable and higher performance solutions than would have been possible using proprietary technology."

Supply Chain Optimization

The ICP selection comes on the heels of Lockheed Martin's selection of Raytheon for the Next Gen Distributed Aperture System, which will reduce lifecycle costs by more than $3 billion, enhance reliability and increased capability.

"With production ramping up and the operational fleet growing fast, we are looking at every layer of our global supply chain to find opportunities to increase capacity, reduce production and sustainment costs, improve parts reliability and enhance capabilities," said Ulmer.

In addition to competition, the company is transitioning several F-35 suppliers to longer term Performance Based Logistics contracts to enhance parts availability and reduce sustainment costs. Previously under annual contracts, the new 5-year PBLs allow each supplier to make longer term investments and actions to reduce costs and improve efficiencies.

With radar evading stealth technology, advanced sensors, enhanced weapons capacity, supersonic speed and superior range, the F-35 is the most lethal, survivable and connected fighter aircraft ever built. More than a fighter jet, the F-35's ability to collect, analyze and share data is a powerful force multiplier enhancing all airborne, surface and ground-based assets in the battlespace and enabling men and women in uniform to execute their mission and come home safe.

For additional information, visit www.f35.com.

About Lockheed Martin
Headquartered in Bethesda, Maryland, Lockheed Martin is a global security and aerospace company that employs approximately 100,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. This year the company received three Edison Awards for ground-breaking innovations in autonomy, satellite technology and directed energy.

About Harris Corporation
Harris Corporation is a leading technology innovator, solving customers' toughest mission-critical challenges by providing solutions that connect, inform and protect. Harris supports government and commercial customers in more than 100 countries and has approximately $6 billion in annual revenue. The company is organized into three business segments: Communication Systems, Space and Intelligence Systems, and Electronic Systems. Learn more at harris.com.

SOURCE Lockheed Martin Aeronautics Company

https://news.lockheedmartin.com/2018-09-27-Lockheed-Martin-Selects-Harris-Corporation-to-Deliver-F-35s-Next-Generation-Computer-Processor

Sur le même sujet

  • DoD IG: Military networks are exposed to ‘unnecessary’ cyber risks

    19 décembre 2018 | International, C4ISR

    DoD IG: Military networks are exposed to ‘unnecessary’ cyber risks

    By: Mark Pomerleau The military services are exposing networks to “unnecessary cybersecurity risks” thanks in part to a lack of visibility over software application inventories, according to a Department of Defense Inspector General report. The IG investigated whether DoD components rationalized their software applications by identifying and eliminating any duplicative or obsolete applications. Rationalizing software applications seeks to improve enterprise IT by identifying all software applications on the network; determining if existing applications are needed, duplicative or obsolete; and determining if applications already existing within the network prior to purchasing new ones. The audit — which focused on Marine Corps, Navy and Air Force commands and divisions — found that the groups examined did not consistently perform this rationalization process. By not having visibility into software application inventories, these organizations were unable to identify the extent of existing vulnerabilities within their applications, the report found. Moreover, such a process could lead to cost savings associated with eliminating duplicative and obsolete applications. Fleet Forces Command was the only command the IG reviewed that had a process in place for eliminating duplicative or obsolete applications. The Air Force did not have a process in place to prevent duplication when purchasing new applications. The report placed blame on the DoD chief information officer for not implementing a solution for software rationalization in response to Federal Information Technology Acquisition Reform Act requirements. The IG made three recommendations for the CIO, who did not provide a response to draft recommendations: Develop an enterprisewide process for conduction software application rationalization throughout DoD; Establish guidance requiring DoD components to conduct rationalization and require DoD component CIOs to develop implementation guidance outlining responsibilities for rationalization. Such a policy should also require components on at least an annual basis to validate the accuracy of their owned and in use software applications inventory; and Conduct periodic review to ensure components are regularly validating the accuracy of their inventory and they are eliminating duplicative and obsolete applications. https://www.fifthdomain.com/dod/2018/12/18/dod-ig-military-networks-are-exposed-to-unnecessary-cyber-risks

  • Les projets d’aérostats, militaires et civils, se multiplient

    10 février 2022 | International, Aérospatial, C4ISR

    Les projets d’aérostats, militaires et civils, se multiplient

    Air & Cosmos observe que les projets d'aérostats militaires et civils se multiplient ces dernières années. En novembre 2021, l'armée de l'Air israélienne a présenté son programme « Sky Dew », un ballon équipé d'un radar de haute précision qui doit être déployé dans le nord du pays. En France, l'entreprise A-NSE produit des aérostats au profit du Bataillon de Marins Pompiers de Marseille, qui a utilisé un appareil (le T-C60L) pour surveiller le risque d'incendie sur le Parc national des Calanques. Frontex a employé un appareil du même constructeur pour surveiller la frontière entre la Grèce et la Turquie, de même que l'armée allemande au Niger. L'entreprise Flying Whales travaille quant à elle avec l'ONF (Office National des Forêts), pour transporter du bois depuis des régions inaccessibles aux moyens classiques. L'armée française a lancé un contrat d'études, confié à Thales et Thales Alenia Space, pour un dirigeable HAPS (High Altitude Platform System), le Stratobus, doté de quatre moteurs électriques et mesurant 140 mètres de long, qui devrait s'élever à 20 km d'altitude et remplir un rôle d'ISR (Intelligence, Surveillance and Reconnaissance), tout en étant capable d'établir un réseau de communication d'urgence. Air & Cosmos du 8 février

  • COVID-19 Forces USN To Expedite USAF Workshare Agreement

    28 avril 2020 | International, Aérospatial

    COVID-19 Forces USN To Expedite USAF Workshare Agreement

    Lee Hudson The U.S. Navy has expedited its component workshare agreement with an Air Force aviation depot because of coronavirus-related workforce shortages. Fleet Readiness Center East (FRCE) located in North Carolina was initially scheduled to begin working on a Boeing F-18 cabin safety valve later this year while the Oklahoma City Air Logistics Complex's test chamber was closed for scheduled maintenance. But the time line was accelerated when Tinker AFB in Oklahoma had a significant number of workers unavailable due to COVID-19 risk mitigation efforts. The cabin safety valve is an integral part of the aircraft's environmental control system, Mary Linton, an aerospace engineer on the Gas Turbine Compressor-Pneumatics Fleet Support Team at FRCE, said in an April 27 statement. The valve is a component on both legacy F/A-18 Hornets and newer Super Hornets that acts as a backup to maintain cabin pressure above 23,000 ft. The part also serves as a supplement to the cabin air pressure regulator when the aircraft is in a rapid dive. “The original intent of bringing this workload to FRCE was to support Tinker Air Force Base through a major support equipment rework effort,” Linton said. “All of the great effort that went into establishing this capability proved even more critical to maintaining the readiness of the F-18 fleet as we navigate through the COVID-19 crisis.” The FRCE team was prepared to begin repairing, checking and testing the cabin safety valves in May, beginning with 20 per month before getting to a monthly rate of 40 by July, said John Miller, a planner and estimator with the Maintenance, Repair and Overhaul Logistics department at FRCE. To date, FRCE has completed 18 of the 40 units inducted so far, with plans to funnel 10 more into the pipeline. Once those first units are completed, the team must wait for additional valves to maintain the workflow. “The availability of components is still in flux due to COVID-19 and other factors, but the transition should move smoothly,” Miller said. https://aviationweek.com/defense-space/budget-policy-operations/covid-19-forces-usn-expedite-usaf-workshare-agreement

Toutes les nouvelles