5 septembre 2019 | International, Aérospatial
Leonardo, through its industrial pillar in the Polish helicopter sector PZL-Świdnik, and the Polish Armaments Group, jointly with the Polish aviation industry and R&D centers, is presenting a next-generation multirole military helicopter concept based on a legacy W-3 Sokół platform at MSPO 2019.
The new concept comprises state-of-the-art technologies offered by the Polish aviation industry. In the future this solution could meet the requirements of the Polish Armed Forces for a new generation of battlefield support helicopters. The collaborative project oversees a major modification of the W-3 platform which is the basis of the helicopter fleet of the Polish Armed Forces. Only the latest and already tested technologies available on the market have been used for the new concept, without compromising the Polish military needs through the guarantee of shorter delivery times, high level of reliability and savings in terms of the acquisition and operating costs.
The helicopter will be equipped with new blades and main rotor and a fully digital avionics system, covering a glass cockpit, flight management system (FMS), synthetic vision system (SVS), digital maps and terrain avoidance warning system (TAWS), as well as a four-axis digital autopilot, new communication system, an engine FADEC and health & usage monitoring system (HUMS).
All of this, combined with mission equipment and additional 200 kg of useful load (owing to an increase from 6,400 kg to 6,600 kg MTOW) will offer remarkable improvement in terms of performance and the operational capability of the helicopter.
On display at MSPO 2019 there will be a mock-up of the new generation W-3 concept helicopter's cockpit. This concept further highlights the stringent global standard capabilities of the Polish aviation industry and how it can meet the battlefield demands of the Polish Armed Forces as well as the mission needs of the Polish military end-users. The type will meet latest requirements of NATO countries to remain in service for another 30 years and overcome a design generation gap between previous and latest generation systems. The venture will also see a significant technology transfer from Leonardo to PZL-Świdnik which, in turn, will enable the Polish aviation industry to further consolidate its growth domestically.
Gian Piero Cutillo, Leonardo Helicopters' MD, said: “A key significance in the development of the new generation W-3 concept helicopter is through the transfer of technology with a view to guarantee to clients the operational autonomy and the broadest possible involvement of Polish industry. Particularly, the major role of our long-term partner, i.e. the Polish Armaments Group and companies belonging to it, which will be involved to a high degree in all phases of the project starting with the design, through to development, and the production which will support the helicopter into the future.”
Sebastian Chwałek, vice president of the Polish Armaments Group, said, “Companies of our group bring into the modernization project several state-of-art solutions and competencies, including among others weapon systems equipped with guided and unguided missiles and firearms. Integration of those solutions on W-3 helicopter will allow this rotorcraft to support effectively soldiers in deployment of the tasks set on them, at the same time guaranteeing to the Armed Forces permanent access to munitions that can be used also by other armies of the NATO.”
The next generation W-3 helicopter will provide the Polish Armed Forces with advanced battlefield support capabilities through a wide range of mission equipment, covering fully integrated armaments system (air-to-air missiles, anti-tank missiles, 70mm rocket pods, cannon pods (12.7/20 mm), machine gun installed in a cabin) and an integrated defensive aids system, an electro optical surveillance system, NVG compatibility and head up display.
The helicopter will be able to perform a wide range of missions, including troop transport, special forces insertion/extraction, CSAR, intelligence, surveillance and armed reconnaissance, and medevac/casevac.
20 août 2024 | International, C4ISR, Sécurité
Blind Eagle targets Latin American nations with spear-phishing attacks, delivering Remote Access Trojans for espionage and financial theft.
8 décembre 2020 | International, Terrestre
The DoD Small Business and Technology Partnerships Office announces the opening of the following Broad Agency Announcement (BAA): Army SBIR 21.4 • A214-001: Identifying and Enabling Emerging Technology Leaders IMPORTANT DATES: • December 8, 2020: BAA opens, begin submitting proposals in DSIP • December 23, 2020: Topic Q&A (formerly SITIS) closes to new questions at 12:00 p.m. ET • January 12, 2021: BAA closes, full proposals must be submitted in DSIP no later than 12:00 p.m. ET The instructions and topics for these BAAs are available on DSIP at https://www.dodsbirsttr.mil/submissions/login and at https://rt.cto.mil/rtl-small-business-resources/sbir-sttr/. Please be sure to submit your proposals as early as possible in order to avoid unexpected delays due to high volume of traffic during the final hours before BAA close. Report system difficulties to the DSIP Help Desk IMMEDIATELY and include screenshots of any error messages received [NEW!] DSIP Registration and Login Effective August 13, 2020: The DoD SBIR/STTR Innovation Portal (DSIP) is now integrated with Login.gov – a government-wide registration platform that provides a seamless login experience. ALL Small Business Concerns (SBCs) are required to register for a Login.gov account and link it to your DSIP account. If you already have a Login.gov account, simply link your existing account to DSIP. To set up your Login.gov account, click the “Login/Register” button on the DSIP homepage, here: https://www.dodsbirsttr.mil/submissions/login. NOTE: The email address you use for Login.gov should match the email address associated with your existing DSIP account. If you do not recall the email address associated with your DSIP account, or if you already have an existing Login.gov account using a different email address, you will need your Firm's DUNS number and your Firm PIN in order to link your Login.gov account with your DSIP account. If the email address associated with your existing DSIP account has been used for multiple DSIP accounts within your Firm, you will also need your Firm's DUNS number and your Firm PIN in order to link your Login.gov account with your DSIP account. The Firm PIN can be obtained from your Firm Admin. You can view the Firm Admin's contact information by entering your Firm's DUNS number when prompted. If you are the Firm Admin, please ensure that you contact all DSIP users in your Firm and provide them with the Firm PIN. Job Aids and Help Videos are in the Learning & Support section of DSIP, here: https://www.dodsbirsttr.mil/submissions/learning-support/training-materials. ALL SBCs MUST complete your Login.gov setup as soon as possible to avoid delays in submitting proposals in DSIP. After setting up your Login.gov account, take a few minutes to log in and become familiar with DSIP. • Returning users can log in from the DSIP homepage. • For new program participants, follow the steps for New User Registration to create your account in DSIP. Topic Q&A (formerly SITIS) Proposers may submit technical questions through Topic Q&A page at https://www.dodsbirsttr.mil/submissions/login. All questions and answers are posted electronically for general viewing. Topic Q&A will close to new questions on December 23, 2020 at 12:00 p.m. ET, but will remain active to view questions and answers related to the topics until the BAA close. Proposers are advised to monitor Topic Q&A during the BAA period for questions and answers and frequently monitor DSIP for updates and amendments to the topics. Learning & Support Visit the Learning & Support section for Job Aids and Help Videos to guide you through submitting and viewing questions and answers in the Topic Q&A, preparing and submitting your proposal in DSIP, and more: https://www.dodsbirsttr.mil/submissions/learning-support/training-materials DSIP Help Desk Contact Info • Phone Number: 703-214-1333 • Email: DoDSBIRSupport@reisystems.com • Non-Holiday Hours: Monday – Friday, 9:00 a.m. – 5:00 p.m. ET • Please refer to the DSIP homepage for Help Desk availability on holidays. Thank you for your interest in the DoD SBIR/STTR Program. DoD SBIR/STTR Support Team To sign up and receive upcoming emails, please follow this link: https://secure.campaigner.com/CSB/Public/Form.aspx?fid=667492&ac=g9gk https://rt.cto.mil/rtl-small-business-resources/sbir-sttr/
23 avril 2024 | International, Sécurité
Businesses face massive disruptions from cyberattacks. From revenue losses to strained customer relations. Discover the hidden costs of cyber breaches