5 novembre 2020 | International, Aérospatial

Here’s how the Pentagon will test industry’s counter-drone tech for an enduring capability

By:

WASHINGTON — Beginning early next year, the Pentagon will host the first opportunity for industry to demonstrate counter-drone technology aimed at small systems, the next step in a plan to test out new capabilities twice a year at common test ranges, according to Army officials in charge of the effort.

Pentagon leaders approved in late September a set of requirements to help counter small drones, laying a path for how industry can develop technology to plug into a single command-and-control system.

The Joint Counter-Small Unmanned Aircraft Systems Office, or JCO, kicked off the pursuit with an industry open house Oct. 30.

The defense secretary delegated the Army in November 2019 to lead the effort to consolidate the wide range of counter-small unmanned aerial system, or C-sUAS, capabilities into a select group of interim systems. Those systems have now been chosen, with the JCO turning its sights toward establishing an enduring collection of capabilities — while acknowledging that there's no silver bullet and that a layered approach is needed, using both kinetic and non-kinetic means, to defeat small drones.

The JCO has identified three sites for common test ranges to conduct evaluation and testing of promising counter-drone technology, according to Col. Greg Soule, resources director for the Army's Rapid Capabilities and Critical Technologies Office. The RCCTO is supporting the JCO by helping identify material solutions for C-sUAS, and it is leveraging its work on directed-energy and high-power microwave technologies to roll into a solution.

A decision memo on locations is awaiting approval by Army Vice Chief Gen. Joseph Martin. Soule said those locations will be shared “when the time is right.”

The JCO also set up a working group to look into testing C-sUAS capabilities in an urban environment, according to Soule.

To ensure the JCO is comparing apples to apples when it comes to counter-drone technology, it also stood up a working group with representatives across all the armed services to establish joint test protocols. That protocol is out for signature and should be in hand by Nov. 6.

Additionally, Ellen Lord, the undersecretary of defense for acquisition and sustainment, has asked the JCO to look at the feasibility of establishing a single source for training targets “to help reduce costs, reduce lead times and streamline the waiver process,” Soule said. “All services already have sources for where they go now. So potentially we could find a way to find some synergies and efficiencies.”

Industry interest

Industry is eager to get technology in front of both the JCO and RCCTO. Many defense companies participating in the Association of the U.S. Army's annual virtual conference last month highlighted counter-drone capability.

General Dynamics Mission Systems featured its recent partnership with Dedrone, a leader in drone detection and defeat technologies using machine-learning software, sensors and electronic attack methods.

Lockheed Martin showcased its MoRFIUS C-sUAS capability that it is working on with the RCCTO. MoRFIUS uses high-power microwave technology in an aerial platform. That capability can be used to extend the range beyond current counter-drone defeat systems to defeat drone swarms. MoRFIUS is a recoverable and reusable technology.

Leonardo DRS also highlighted its mobile counter-drone capability using Moog's Reconfigurable Integrated-weapons Platform turret with multiple kinetic effectors, different electro-magnetic and infrared sensors, an onboard radar, and electronic warfare technologies.

Raytheon, which has a foothold in the C-sUAS market with its Coyote Block II kinetic effector and its Ku-Band Radio Frequency System, emphasized its track record and upgrades to the system.

The industry open house had roughly 500 industry representatives tune in. The JCO will select industry applicants to show off their capabilities at the first demo, which is to take place in the second quarter of fiscal 2021.

At the demonstration, the JCO will provide instrumentation and threat surrogates as well command-and-control elements. Industry participants will need to bring technology to defeat drones, said Adam Martin, who briefed industry on test ranges and protocols at the open house.

There will be technology insertion points in the enduring architecture after each demonstration that address gaps, he added.

https://www.defensenews.com/unmanned/2020/11/04/heres-how-the-pentagon-will-test-industrys-counter-drone-tech-for-an-enduring-capability/

Sur le même sujet

  • Saab receives Carl-Gustaf order from U.S. Army

    17 juillet 2020 | International, Aérospatial

    Saab receives Carl-Gustaf order from U.S. Army

    July 16, 2020 - Saab has received an order for Carl-Gustaf® ammunition and AT4 systems from the U.S. Army. The order value is approximately USD 100 million (930 MSEK) and deliveries will take place in 2021. The order was placed within an indefinite delivery and quantity agreement signed in 2019, enabling the customer to place orders for Carl-Gustaf ammunition and AT4 systems during a five-year period to a value of up to USD 445 million. The AT4 systems and the Carl-Gustaf munitions in this order will be operated by the U.S. Army, Marine Corps, and Special Forces Command. “The Saab family of shoulder-fired munitions provides the U.S. Armed Forces with effective capabilities against a wide area of targets. With these systems, soldiers and Marines gain reliable, easy-to-use technology optimized for complex environments and engagements,” says Erik Smith, President and CEO of Saab in the U.S. Since 1987, Saab has delivered more than 600,000 AT4s, both directly and under license, to the U.S. Armed Forces. The Carl-Gustaf system has been a program of record in the U.S. since 2013 and in 2018 the U.S. Army announced it would acquire the latest version of the system – the Carl-Gustaf M4 (designated M3E1 in the U.S.) with a reduced weight of less than 15 pounds (7 kilos). The order was booked in Q2 2020. For further information, please contact: Saab Press Centre, +46 (0)734 180 018, presscentre@saabgroup.com www.saabgroup.com Twitter: @Saab Saab serves the global market with world-leading products, services and solutions within military defence and civil security. Saab has operations and employees on all continents around the world. Through innovative, collaborative and pragmatic thinking, Saab develops, adopts and improves new technology to meet customers' changing needs. View source version on Saab: https://saabgroup.com/media/news-press/news/2020-07/saab-receives-carl-gustaf-order-from-u.-s.-army/

  • Italian firm Leonardo merges 3 divisions, names Brit to head them

    17 décembre 2018 | International, Aérospatial, Naval, Terrestre, C4ISR

    Italian firm Leonardo merges 3 divisions, names Brit to head them

    By: Tom Kington ROME — Italy's Leonardo has announced a major shakeup of its management structure, which will see three of its seven divisions merged and entrusted to one of the firm's top British managers, Norman Bone. Reporting to CEO Alessandro Profumo, Bone will oversee a new Electronics Division, into which its Land & Naval Defence Electronics, Airborne & Space Systems, and Defence Systems divisions will be merged. Bone was previously the head of the Airborne & Space Systems division as well as chairman and managing director of Leonardo's U.K. operation. The Defense Systems division includes Leonardo's torpedo business, formerly known as WASS, and its cannon business, formerly known as Oto Melara. In a statement, Leonardo said the merging of the divisions was designed to “achieve suitable critical mass” in its electronics-related businesses. “This evolution will result in the organizational model being aligned with that of the main players in the market, ensuring an even more integrated development,” the firm said. Additionally, the firm's Air Traffic Control and Automation Systems businesses will be moved from the firm's Security & Information Systems Division to the new Electronics Division. The remainder of the Security & Information Systems division has been renamed the Cyber Security Division, and will be taken over on Jan. 21 by Barbara Poggiali, the firm said. Leonardo's three other divisions are Helicopters, Aircraft and Aerostructures. The shakeup is the latest stage in the consolidation of Leonardo's activities, which formerly existed as separate companies including AgustaWestland and Alenia. They were first transformed into divisions of the firm in 2016 as the company changed its name to Leonardo from Finmeccanica. https://www.defensenews.com/industry/2018/12/14/italian-firm-leonardo-merges-3-divisions-names-brit-to-head-them

  • Northrop Grumman CEO: We Can Build a Next-Generation Fighter

    29 juillet 2022 | International, Aérospatial

    Northrop Grumman CEO: We Can Build a Next-Generation Fighter

    Kathy Warden said the company’s B-21 stealth bomber positions it well to compete for the Next Generation Air Dominance warplane.

Toutes les nouvelles