12 juillet 2018 | International, Naval

Destroyers Maxed Out, Navy Looks To New Hulls: Power For Radars & Lasers

By

ARLINGTON: The Navy has crammed as much electronics as it can into its new DDG-51 Flight III destroyers now beginning construction, Rear Adm. William Galinis said this morning. That drives the service towards a new Large Surface Combatant that can comfortably accommodate the same high-powered radars, as well as future weapons such as lasers, on either a modified DDG-51 hull or an entirely new design.

“It's going to be more of an evolutionary approach as we migrate from the DDG-51 Flight IIIs to the Large Surface Combatant,” said Galinis, the Navy's Program Executive Officer for Ships. (LSC evolved from the Future Surface Combatant concept and will serve along a new frigate and unmanned surface vessels). “(We) start with a DDG-51 flight III combat system and we build off of that, probably bringing in a new HME (Hull, Mechanical, & Engineering) infrastructure, a new power architecture, to support that system as it then evolves going forward.”

“Before the end of the year, we'll start reaching out to industry to start sharing some of the thoughts we have and where we think we're going,” Galinis told a Navy League breakfast audience. “We'll bring industry into this at the right point, but we're still kind of working a lot of the technology pieces and what the requirements are right now.”

Evolution, Not Revolution

This evolutionary approach is similar to how the current Aegis combat system entered service on the CG-47 Ticonderoga cruisers in 1983 but came into its own on the DDG-51 Arleigh Burke destroyers. (Despite the difference in names, the two classes are virtually the same size). The DDG-51 is now the single most common type in the fleet, a vital part of the hoped-for 355-ship Navy, with some ships expected to serve into the 2070s:

  • There are now 64 Arleigh Burkes of various sub-types in service;
  • nine of the latest Flight IIA variant are in various stages of construction; and
  • work is beginning on the new Flight IIIs in Mississippi (Huntington Ingalls Industries) and Maine (General Dynamics-owned Bath Iron Works).

The Navy is doubling down on long-standing programs to keep its older warships up to date and on par with the newest versions. But the current destroyers just won't be able to keep up with the Flight III, which will have a slightly modified hull and higher-voltage electricity to accommodate Raytheon's massive new Air & Missile Defense Radar. A stripped down version of the AMDR, the Enterprise Air Search Radar (EASR, also by Raytheon) is already going on amphibious ships and might just fit on older Burkes as well, however.

But it's tight. On the Flight III, even with the hull modifications, “you kind of get to the naval architectural limits of the DDG-51 hullform,” Galinis told a Navy League breakfast this morning. “That's going to bring a lot of incredible capabilities to the fleet but there's also a fair amount of technical risk.”

The Navy is laboring mightily to reduce that risk on Flight III with simulations and land-based testing, including a full prototype of the new power plant being built in Philadelphia. But it's clear the combat system is out of room to grow within the limits of the current hull.

So how different does the next ship need to be? “How much more combat capability can we squeeze into the current hullform?” Galinis said. “Do we use the DDG-51 hullform and maybe expand that? Do we build a new hullform?”

“We're looking at all the options, Sydney,” he said when reporters clustered around him after his talk. “(It's in) very, very early stages... to say it'll be one system over another or one power architecture over another, it's way too early.”

“We're still working through what that power architecture looks like,” Galinis told the breakfast. “Do we stay with a more traditional (gas-driven) system... or do we really make that transition to an integrated electric plant — and at some point, probably, bring in energy storage magazines...to support directed energy weapons and things like that?”

The admiral's referring here to anti-missile lasers, railguns, and other high-tech but electricity-hungry systems. Having field-tested a rather jury-rigged 30 kilowatt laseron the converted amphibious ship Ponce, the Navy's next step is a more permanent, properly integrated installation next year on an amphibious ship, LPD-27 Portland. (Subsequent LPDs won't have the laser under current plans). But Portland is part of the relatively roomy LPD-17 San Antonio class, which has plenty of space, weight capacity, power, and cooling capacity (SWAP-C) available, in large part because the Navy never installed a planned 16 Vertical Launch System (VLS) tubes in the bow. By contrast, while the Navy's studying how to fit a laser on the Arleigh Burkes, the space and electricity available are much tighter.

The DDG-1000 Digression

The larger DDG-1000 Zumwalt class does have integrated electric drive that's performing well in sea trials, Galinis said. (That said, the brand-new DDG-1001, Michael Monsoor, has had glitches with the harmonic filter that manages the power and, more recently, with its turbine engine blades). “We've learned a lot from DDG-1000” that the Navy's now applying both to its highest priority program, the Columbia-class nuclear missile submarine, and potentially to the future Large Surface Combatant as well.

In other ways, DDG-1000 is a dead end, too large and expensive for the Navy to afford in quantity. The Navy truncated the class to just three ships and restarted Arleigh Burke production, which it had halted on the assumption the Zumwalts would be built in bulk.

Today, the Zumwalt‘s very mission is in doubt. The ship was designed around a 155 mm gun with revolutionary rocket-boosted shells, but ammunition technology hasn't reached the ranges the Navy wanted for the original mission of bombarding targets ashore. With the resurgence of the Russian fleet and the rise of China's, the Navy now wants to turn the DDG-1000s into ship-killers, which requires even longer ranges because modern naval battle is a duel of missiles.

The gun's place in ship-to-ship combat is “probably not a significant role, at least not at the ranges we're interested in,” Galinis told reporters. While the Navy could invest in long-range cannon ammunition, he said, it's paused work on several potential shells it test-fired last summer, awaiting the final mission review. If the Zumwalts do move to the anti-ship mission, which Galinis said they would be well suited for with minor modifications, their guns will be less relevant than their 80 Advanced VLS missile tubes or future weapons such as railguns drawing on their prodigious electric power.

That power plant might evolve into the electric heart of the future Large Surface Combatant — or it might not.

“We're going to have the requirements discussion with Navy leadership and then we're going to want to engage industry as we start thinking about what options might be available,” Galinis said. “Frankly industry's probably best suited to try to help us with the technology piece, especially if we start thinking (that) we want an innovative electric plant.....We'd go to probably the big power electronics/power system vendors, who really work in that field and have the best information on where technology's going.”

https://breakingdefense.com/2018/07/destroyers-maxed-out-navy-looks-to-new-hulls-power-for-radars-lasers/

Sur le même sujet

  • How Nanotech Will Help the U.S. Military Reach Mach 5

    25 novembre 2019 | International, Aérospatial

    How Nanotech Will Help the U.S. Military Reach Mach 5

    The U.S. government is pushing into hypersonic weapons in a big way, with at least five different weapons programs currently in development. Nanotechnology is shaping up to be a key tech that will enable delivery systems to survive traveling through the atmosphere at Mach 5 and above, with carbon nanotubes showing promise as strong, lightweight material that rapidly sheds heat. Hypersonic weapons are weapons that travel at incredible speeds through the atmosphere. Hypersonics start at Mach 5 (3,836 miles an hour), or five times the speed of sound. Pushing an object through the air at really, really fast speeds creates a unique problem: as speed increases, the friction from the object passing through air also increases. This friction generates heat. The skin of the SR-71 Blackbird strategic reconnaissance jet and the fasted manned airplane ever built regularly warmed to up to 500 degrees Fahrenheit at Mach 3. The X-15 rocket plane, flown during the 1960s, reached temperatures of 1200 Fahrenheit as it flew to Mach 6. At Mach 10, the friction is enough to “melt the toughest steel,” while at Mach 20, the temperature reaches an astounding 17,000 Fahrenheit. Eventually, hypersonic weapons could reach Mach 24. Scientists and engineers understand how to handle traditional air friction problems thanks to the technical challenges of spacecraft and nuclear warheads re-entering the atmosphere. But a missile warhead de-orbiting over an enemy target is only exposed to heat for a handful of minutes, as it transitions from space to the atmosphere and finally smashes into its target. A hypersonic weapon, on the other hand, spends its entire flight within the atmosphere and is exposed to high heat the entire time. An article at DefenseOne describes how scientists are working with carbon nanotubes to solve the heat issue. Scientists at Florida State University's High-Performance Materials Institute are looking into using carbon nanotubes as a construction material for hypersonic weapons. Carbon nanotubes are a synthetic material consisting of carbon tubes with a diameter as small as one nanometer. Carbon nanotubes are stronger than steel and insulate against heat. Now, researchers have discovered that soaking carbon nanotubes in phenol can increase their ability to disperse heat by one-sixth, allowing less nanomaterials to be used for the same job. What does this mean for hypersonic weapons? It means that materials that can stand the heat and stresses of hypersonic, atmospheric travel are on the way, and that hypersonic weapon designers could even safely achieve higher speeds by using thicker layers of the stuff. https://www.popularmechanics.com/military/research/a29847271/us-military-nanotech/

  • At Defence Expo 2020, Make-in-India achievement; Rafale engine doors, Falcon front cockpit. Here’s all Dassault aviation will show

    5 février 2020 | International, Aérospatial

    At Defence Expo 2020, Make-in-India achievement; Rafale engine doors, Falcon front cockpit. Here’s all Dassault aviation will show

    For the first time Dassault Aviation of France will be exhibiting at the Defence Expo and the main attraction besides other displays will be the Rafale mock-up with the Indian colours. Defence Expo 2020 is being held at Lucknow, Uttar Pradesh The Rafale fighter aircraft which were handed over to the defence minister Rajnath Singh last October will be arriving in India early summer. The mock-up in the colours of the IAF is to illustrate the determination of the French company's commitment to meet all future additional fighter aircraft needs. Also, a mock-up of Rafale M (Naval variant) will be on display to present capabilities of the variant taking part in the tender of 57 aircraft to equip Indian Navy aircraft carriers. There will also be a Mirage 2000 I/TI mock-up on display. Highlighting its “Make in India” achievements on display will be Rafale engine doors manufactured in the Dassault Reliance Aerospace Ltd (DRAL) 15000 square meters the facility in Nagpur, and the first Falcon 2000 cockpit front section manufactured at Dassault Reliance Aerospace Limited facility at MIHAN, Nagpur. Eric Trappier, Chairman and Chief Executive Officer of Dassault Aviation has said, “Our participation in the DefExpo is the expression of the company's full dedication to contribute to India's outreach”. According to the company larger infrastructures are being developed which will help in ramping up of DRAL capabilities towards the taking-off of an entire line of Falcon 2000 fully manufactured and assembled in India. This will pave the way for the future manufacturing and assembly of Rafale in India. And these will help to build up an Indian aerospace manufacturing eco-system, both in civil and military fields, which will position India as an international reference in the global aerospace market. The company has played a very important role in helping India to establish a state-of-the-art manufacturing facilities with cutting edge technologies. https://www.financialexpress.com/defence/defence-expo-2020-rafale-mirage-2000-make-in-india-achievement-engine-door-cockpit-dassault-aviation-dral/1855850/

  • Top USAF general urges support for Next-Gen fighter - Skies Mag

    11 mars 2021 | International, Aérospatial

    Top USAF general urges support for Next-Gen fighter - Skies Mag

    Air Combat Command chief talks NGAD, Tacair study, and acknowledges current F-35 problems.

Toutes les nouvelles