13 avril 2023 | International, C4ISR

Comply-to-Connect: The roadmap for the Pentagon’s Zero Trust mission

C2C leverages zero trust’s least privilege principles to safeguard access to data.

https://www.c4isrnet.com/thought-leadership/2023/04/13/comply-to-connect-the-roadmap-for-the-pentagons-zero-trust-mission/

Sur le même sujet

  • Government watchdog finds more problems with F-35’s spare parts pipeline

    26 avril 2019 | International, Aérospatial

    Government watchdog finds more problems with F-35’s spare parts pipeline

    By: Valerie Insinna WASHINGTON — Only about half of the F-35s worldwide were ready to flyduring an eight-month period in 2018, with the wait for spare parts keeping jets on the ground nearly 30 percent of the time, according to a new report by the Government Accountability Office. Over the past several years, the Defense Department has sought to improve mission capable rates by making improvements to the way it and F-35 contractor Lockheed Martin order, stockpile and repair spare parts. However, GAO's findings imply that the situation may have gotten worse. The GAO's report, released April 25, investigated how spare parts shortages impacted F-35 availability and mission capable rates in 2018, with most data gathered between a May and November sustainment contract period. “In 2017, we reported that DOD was experiencing sustainment challenges that were reducing warfighter readiness, including delays of 6 years in standing up repair capabilities for F-35 parts at its depots and significant spare parts shortages that were preventing the F-35 fleet from flying about 20 percent of the time,” GAO said in the report. “According to prime contractor data, from May through November 2018, F-35 aircraft across the fleet were unable to fly 29.7 percent of the time due to spare parts shortages,” it said. “Specifically, the F-35 supply chain does not have enough spare parts available to keep aircraft flying enough of the time necessary to meet warfighter requirements.” That lack of improvement may make it more difficult for the U.S. Air Force, Navy and Marine Corps to hit an 80 percent mission capable rate by the end of fiscal year 2019, as mandated by then-Defense Secretary Jim Mattis last fall. The military services stopped providing mission capable rates for aircraft last year, citing operational sensitivities. However, the data put forth by the GAO indicates that progress stagnated in the lead up to Mattis' order. From May to November 2018, mission capable rates — which measure how many planes possessed by a squadron can perform at least one of its missions — hovered around 50 percent for all versions of the F-35. But when GAO assessed how many planes were fully mission capable — meaning that they were ready to fulfill all of their mission sets — all variants were far from meeting the 60 percent target. Only 2 percent of F-35C carrier takeoff and landing versions hit the fully mission capable mark, with the F-35Bs slightly better at 16 percent and the F-35A at 34 percent. The GAO is skeptical that the services will be able to hit the 80 percent mission capable rate goal this year, and it is even more critical of the Defense Department's plans to fund spares in future years. The department intends to buy “only enough parts to enable about 80 percent of its aircraft to be mission-capable based on the availability of parts.” However, that planning construct will likely only yield a 70 percent mission capable rate at best, the GAO said, because it only accounts for the aircraft on the flight line and not jets that are in the depot for longer term maintenance. No silver bullet for parts shortage issues Like all complicated problems, there is no single solution for the F-35 spare parts shortage, which is driven by a number of factors. GAO indicated that the Defense Department still has “a limited capacity” to repair broken parts, creating a backlog of 4,300 parts still needing to be addressed. Between September and November, it took more than six months to fix parts that should have been repaired in a window of two to three months. The F-35's much-maligned Autonomic Logistics Information System (ALIS) was designed to be able to track parts and automate the process of generating and expediting work orders, however, GAO notes that the system still requires manual workarounds from users in order to accomplish tasks. Supply and maintenance personnel cited challenges such as “missing or corrupted electronic spare parts data,” limited automation and problems caused by ALIS's subsystems not communicating with each other properly, it said. As the F-35 is still a relatively new platform, it has taken time for the program to assess which parts have been failing more often than previously estimated — but that is an area where the Defense Department is making progress, the GAO stated. “DOD has identified specific parts shortages that are causing the greatest aircraft capability degradation, and it is developing short-term and long-term mitigation strategies to increase the quantity and reliability of these parts,” the report said. One such component is a coating used on the F-35's canopy to help it maintain its stealth characteristics, which has been found to peel off at an unexpected rate, creating a heightened demand for canopies. “To address these challenges, the program is looking for additional manufacturing sources for the canopy and is considering design changes,” the GAO stated. But — somewhat paradoxically — the F-35 has been flying for a long enough time that there is significant parts differences between the first jets that rolled off the production line to the most recently manufactured planes. The GAO found “at least 39 different part combinations across the fleet” on top of variations in software. “According to the program office, DOD spent more than $15 billion to purchase F-35 aircraft from the earliest lots of production, specifically lots 2 through 5 ... but it faces challenges in providing enough spare parts for these aircraft,” the report stated. One problem — the cannibalization of F-35 aircraft for parts — is partially user-inflicted. “From May through November 2018, F-35 squadrons cannibalized (that is, took) parts from other aircraft at rates that were more than six times greater than the services' objective,” the GAO stated. “These high rates of cannibalization mask even greater parts shortages, because personnel at F-35 squadrons are pulling parts off of other aircraft that are already unable to fly instead of waiting for new parts to be delivered through the supply chain.” During an interview this February, Lt. Col. Toby Walker, deputy commander of the 33rd Maintenance Group, told Defense News that F-35 maintainers at Eglin Air Force Base, Fla., had stopped pulling parts off a cannibalized F-35 and had seen some improvements to mission capable rates as a result. “We're not continually moving parts from one aircraft to another. We're relying on the program to provide our parts,” he said. “It was a very strategic plan to do that to increase aircraft availability by not sitting an aircraft down.” In a statement, Lockheed Martin said that it had taken key steps to improve parts availability, such as transitioning some suppliers to performance based logistics contracts that incentivize companies to meet certain targets, as well as “master repair agreements” that will allow other suppliers to make longer term investments in their production capability. “These actions are beginning to deliver results and we're forecasting additional improvement. Newer production aircraft are averaging greater than 60 percent mission capable rates, with some operational squadrons consistently at 70 percent,” the company said. “From a cost perspective, Lockheed Martin has reduced its portion of cost per aircraft per year by 15 percent since 2015. Our goal is to further reduce costs to $25,000 cost per flight hour by 2025, which is comparable to legacy aircraft while providing a generational leap in capability.” https://www.defensenews.com/air/2019/04/25/government-watchdog-finds-more-problems-with-f-35s-spare-parts-pipeline

  • Spatial militaire : «Nous avons les moyens de nos ambitions», selon le général Friedling (CDE)

    26 novembre 2020 | International, Aérospatial

    Spatial militaire : «Nous avons les moyens de nos ambitions», selon le général Friedling (CDE)

    DEFENSE Spatial militaire : «Nous avons les moyens de nos ambitions», selon le général Friedling (CDE) Dans le cadre du Paris Air Forum, le général Michel Friedling, Commandant du CDE (Commandement de l'Espace) au sein de l'armée de l'Air et de l'Espace, Emmanuel Chiva, directeur de l'Agence de l'innovation de défense, Franck Poirrier, PDG de Sodern, représentant des équipementiers au Cospace, et Philippe Gautier, président d'Hemeria, ont échangé au sujet de la stratégie spatiale de défense française. «L'espace joue un rôle essentiel et est au cœur d'une compétition sans précédent. C'est un thé'tre de confrontation avec ses enjeux propres», rappelle le général Michel Friedling. «Nous avons les moyens de nos ambitions, et nous avons déjà des résultats. Nous avons signé les premiers contrats de service pour la surveillance de l'espace. Nous avons formé nos premiers opérateurs spatiaux. Nous aurons nos premières infrastructures à Toulouse en 2023 et premier centre de commandement en 2025», relève-t-il. L'industrie travaille à mettre au point des démonstrateurs pour la capacité d'intervention en orbite, qui devraient voler dès 2023 et 2024. Sodern travaille ainsi sur des «capteurs d'intrus», qui détecteront les objets approchant des satellites Syracuse 4, basés sur sa technologie de viseurs d'étoiles, tandis que Hemeria étudie des petits satellites patrouilleurs Yoda, pour la protection rapprochée des grands satellites géostationnaires, à partir de son expérience sur le nanosatellite Angels. Franck Poirrier, PDG de Sodern, souligne : «l'industrie est là pour servir la souveraineté et c'est pour cela qu'il faut inclure la politique industrielle dans notre réflexion autour de la maîtrise de l'espace». Un «plan équipementier» a déjà été avalisé par Airbus Defence & Space, Thales Alenia Space et les trois ministères de tutelle : le ministère de l'Économie, des Finances et de la Relance, le ministère de l'Enseignement Supérieur et de la Recherche et le ministère des Armées. L'Agence de l'innovation de défense (AID) joue un rôle majeur : «Nous sommes une usine à accélérer les projets, avec un budget d'environ 1 milliard d'euros», explique Emmanuel Chiva. «Nous sommes là pour piloter et orienter l'innovation de défense, mais également pour capter dans le civil les innovations pertinentes, car le monde spatial est éminemment dual». La Tribune du 26 novembre

  • Polaris Awarded 7-Year Contract To Build U.S. Special Operations Newest Vehicle

    10 juin 2020 | International, Terrestre

    Polaris Awarded 7-Year Contract To Build U.S. Special Operations Newest Vehicle

    Minneapolis, June 4, 2020 – Following a competitive bid process, Government Services Administration (GSA), in support of U.S. Special Operations Command (USSOCOM), awarded Polaris Government and Defense a follow-on contract for the Polaris MRZR Alpha, a new light tactical vehicle. Polaris Government and Defense is a division of global powersports leader Polaris Inc. (NYSE: PII). The seven-year contract has a value of up to $109 million and was awarded on May 29, 2020. “Winning this LTATV award is well-deserved recognition for the dedication of our Polaris Defense team and the performance of our vehicles, but our real victory is the opportunity to continue serving our military customers. They demand – and deserve – the best engineering and technology, and we consider it an honor to leverage our experience as the world's largest Powersports company to design and build the vehicles our warfighters need,” said Scott Wine, chairman and CEO, Polaris. Polaris is the largest ultralight tactical vehicle provider for the U.S. military, with the MRZR Alpha being Polaris' 11th military vehicle produced in 12 years. Their light weight and off-road capabilities make them ideal for transport via helicopter and operation in terrain that would otherwise be traversed on foot. “Polaris has had the privilege of providing vehicles to USSOCOM since 2005 and we take a great deal of pride in delivering and supporting the current LTATV,” said Jed Leonard, vice president, Polaris Government and Defense. “The Polaris MRZR Alpha supports USSOCOM's requirements for durability, performance, payload profile and internal air transportability.” Designed, engineered and produced in Minnesota, the MRZR platform incorporates technology and innovations from across Polaris' broad product portfolio. The MRZR Alpha represents millions in internal technology research and development investments that keep Polaris in front of the highly competitive off-road vehicle market. Defense engineers leveraged learnings from snowmobile chassis design, redesigned sport RZR changes and off-road race team modifications. Vehicle systems were also designed with near-future innovation in mind, with an architecture ready to accept new technologies and capabilities available within Polaris. Combining new and recently proven technologies, delivers a vehicle that has more power, increased payload, ground clearance and durability. The MRZR Alpha will be assembled in Roseau, Minn., one of Polaris' manufacturing plants and R&D centers. A key part of its strong North American manufacturing footprint, Roseau is the birthplace of Polaris, where the company has maintained operations for more than 65 years and currently employs nearly 1500 employees. The MRZR Alpha's versatility is further enhanced by improved exportable power and increased payload. Polaris first introduced the MRZR platform in 2012 and has continued to enhance the vehicle to meet the mission demands of the U.S. military, and over 40 allied forces worldwide. Since their introduction, MRZRs have been outfitted with counter unmanned aerial systems (C-UAS), weapons and high-energy laser systems, intelligence, surveillance and reconnaissance (ISR) systems, expeditionary command and control systems, autonomy packages, litters for medical and casualty evacuation and communication equipment. Throughout the 1980s and 90s, the United States military's rising demand for Polaris off-road vehicles led to Polaris being the first ATV OEM to produce militarized vehicles for U.S. Special Operations Forces and the United States Army. To better serve its military customers, Polaris established Polaris Defense in 2005. Today, Polaris designs, engineers and produces its MV850 ATV, MRZR and DAGOR military vehicles in the U.S. View source version on Polaris Government and Defense: https://www.polaris.com/en-us/news/product/polaris-awarded-7-year-contract-to-build-us-special-operations-newest-vehicle/

Toutes les nouvelles