22 juillet 2020 | International, Aérospatial
Seattle, July 20, 2020 /PRNewswire/ - Boeing [NYSE:BA] and Etihad Airways will use a 787-10 Dreamliner to test ways to reduce emissions and noise as part of the aerospace company's ecoDemonstrator program before the airline accepts delivery of the airplane this fall. The collaboration, which includes extensive sound measurement testing with industry partners, builds on a strategic sustainability alliance Boeing and Etihad formed in November 2019.
"This is the latest program under Etihad's industry-leading strategic partnership with Boeing, focusing on innovating real-world solutions to the key sustainability challenges facing the aviation industry," Etihad Aviation Group Chief Executive Officer Tony Douglas said. "The ecoDemonstrator program is founded on innovation and sustainability — and these are core values for Etihad Airways, Abu Dhabi and the United Arab Emirates. Etihad and Boeing see a great opportunity to collaborate and share knowledge to minimize the impact of aviation on the environment."
The ecoDemonstrator program utilizes commercial aircraft to test technologies that can make aviation safer and more sustainable now and into the future. The 2020 program, which will begin testing in August, is the first to use a Boeing 787-10.
"Industry collaboration is a key aspect of Boeing's ecoDemonstrator program that enables us to accelerate innovation," said Stan Deal, Boeing Commercial Airplanes president and CEO. "We're proud to broaden our sustainability partnership with Etihad Airways by testing promising technologies that can reduce emissions, help commercial aviation meet our climate goals, and allow the industry to grow in a responsible manner that respects our planet and its natural resources."
Boeing and Etihad will work with industry-leading partners, including NASA and Safran Landing Systems, to conduct aircraft noise measurements from sensors on the airplane and the ground. The data will be used to validate aircraft noise prediction processes and the sound reduction potential of aircraft designs, including landing gear, that are modified for quieter operations.
In addition, a flight will be conducted during which pilots, air traffic controllers and an airline's operations center will simultaneously share digital information to optimize routing efficiency and enhance safety by reducing workload and radio frequency congestion.
Test flights will be flown on a blend of sustainable fuel, which significantly lowers aviation's environmental footprint. The testing program is expected to last about four weeks before Etihad enters its Boeing 787-10 into service.
Contact
Saffana Michael
Boeing Communications
saffana.michael2@boeing.com
Mobile: +97150 4590651
Paul McElroy
Boeing Communications
paul.mcelroy2@boeing.com
Mobile: +1 425-283-7740
SOURCE Boeing
View source version on Boeing Newsroom: https://boeing.mediaroom.com/2020-07-20-Boeing-and-Etihad-Broaden-Sustainability-Alliance-by-Testing-Innovations-on-ecoDemonstrator-787
21 octobre 2023 | International, Terrestre
“Soldiers need to shoot, move and communicate,” the Army chief of staff said. “Technology should facilitate those fundamentals, not encumber them.”
13 octobre 2021 | International, Aérospatial
The new undersecretary of defense for research and engineering, Heidi Shyu, laid out some of her top priorities for the Pentagon in its innovation race with China at the Association of the U.S. Army's annual meeting on Tuesday.
6 mai 2019 | International, Aérospatial, Naval, Terrestre, C4ISR, Sécurité, Autre défense
Military systems are increasingly using software to support functionality, new capabilities, and beyond. Before a new piece of software can be deployed within a system however, its functional safety and compliance with certain standards must be verified and ultimately receive certification. As the rapid rate of software usage continues to grow, it is becoming exceedingly difficult to assure that all software considered for military use is coded correctly and then tested, verified, and documented appropriately. “Software requires a certain level of certification – or approval that it will work as intended with minimal risks – before receiving approval for use within military systems and platforms,” said Dr. Ray Richards, a program manager in DARPA's Information Innovation Office (I2O). “However, the effort required to certify software is an impediment to expeditiously developing and fielding new capabilities within the defense community.” Today, the software certification process is largely manual and relies on human evaluators combing through piles of documentation, or assurance evidence, to determine whether the software meets certain certification criteria. The process is time consuming, costly, and can result in superficial or incomplete evaluations as reviewers bring their own sets of expertise, experiences, and biases to the process. A lack of a principled means of decomposing evaluations makes it difficult to create a balanced and trustworthy process that applies equally to all software. Further, each subsystem and component must be evaluated independently and re-evaluated before it can be used in a new system. “Just because a subsystem is certified for one system or platform does not mean it is unilaterally certified for all,” noted Richards. This creates additional time delays and review cycles. To help accelerate and scale the software certification process, DARPA developed the Automated Rapid Certification Of Software (ARCOS) program. The goal of ARCOS is to create tools and a process that would allow for the automated assessment of software evidence and provide justification for a software's level of assurance that is understandable. Taking advantage of recent advances in model-based design technology, “Big Code” analytics, mathematically rigorous analysis and verification, as well as assurance case languages, ARCOS seeks to develop a capability to automatically evaluate software assurance evidence to enable certifiers to rapidly determine that system risk is acceptable. “This approach to reengineering the software certification process is well timed as it aligns with the DoD Digital Engineering Strategy, which details how the department is looking to move away from document-based engineering processes and towards design models that are to be the authoritative source of truth for systems,” said Richards. To create this automated capability, ARCOS will explore techniques for automating the evidence generation process for new and legacy software; create a means of curating evidence while maintaining its provenance; and develop technologies for the automated construction of assurance cases, as well as technologies that can validate and assess the confidence of an assurance case argument. The evidence generation, curation, and assessment technologies will form the ARCOS tools and processes, working collectively to provide a scalable means of accelerating the pathway to certification. Throughout the program's expected three phases, evaluations and assessments will occur to gauge how the research is progressing. ARCOS researchers will tackle progressively more challenging sets of software systems and associated artifacts. The envisioned evaluation progression will move from a single software module to a set of interacting modules and finally to a realistic military software system. Interested proposers will have an opportunity to learn more during a Proposers Day on May 14, 2019, from 8:30AM to 3:30PM (EST) at the DARPA Conference Center, located at 675 N. Randolph Street, Arlington, Virginia, 22203. The purpose of the Proposers Day is to outline the ARCOS technical goals and challenges, and to promote an understanding of the BAA proposal requirements. For details about the event, including registration requirements, please visit: https://www.fbo.gov/index?s=opportunity&mode=form&id=6a8f03472cf43a3558456b807877f248&tab=core&_cview=0 Additional information will be available in the forthcoming Broad Agency Announcement, which will be posted to www.fbo.gov. https://www.darpa.mil/news-events/2019-05-03