Filter Results:

All sectors

All categories

    7635 news articles

    You can refine the results using the filters above.

  • Contract Awards by US Department of Defense - July 3, 2019

    July 4, 2019 | International, Aerospace, Naval, Land, C4ISR, Security, Other Defence

    Contract Awards by US Department of Defense - July 3, 2019

    AIR FORCE DynCorp International, Fort Worth, Texas, has been awarded a $308,616,183 firm-fixed-price contract for aviation command and control operations and maintenance services. This contract provides for air traffic control, airfield management and associated maintenance support. Work will be performed in the Air Force Central Command's area of responsibility and is expected to be completed by July 31, 2024. This award is the result of a competitive acquisition with four offers received. Fiscal 2019 operations and maintenance funds in the amount of $379,576 are being obligated at the time of award. The Air Combat Command's Acquisitions management and integration center, Langley Air Force Base, Hampton, Virginia, is the contracting activity (FA4890-19-C-A013). AAR Supply Chain Inc., doing business as AAR Defense Systems & Logistics, Wood Dale, Illinois, has been awarded a $209,986,676 ceiling indefinite-delivery/indefinite-quantity contract for C-130H contractor logistics support for the Afghanistan Air Force. This contract will provide the Afghanistan Air Force with full C-130H contractor logistics support to include maintenance and repair, as well as on the job training for local Afghan nationals. Work will be performed Kabul, Afghanistan, and is expected to be completed by Jan. 29, 2025. This contract involves foreign military sales to Afghanistan. Foreign Military Sales funds in the amount of $12,011 are being obligated at the time of award. This award is the result of a competitive acquisition and one offer was received. Air Force Life Cycle Management Center, Robins Air Force Base, Georgia, is the contracting activity (FA8553-19-D-0006). The University of Dayton Research Institute, Dayton, Ohio, has been awarded a $28,527,970 firm-fixed price, labor hour and cost reimbursement-no-fee contract for F-15 sustainment engineering studies. This contract provides for systems/structural engineering field and programmed depot maintenance support, reliability and maintainability analysis and aircraft structural integrity program capability development and sustainment. Work will be performed at Dayton, Ohio; and Robins Air Force Base, Georgia, and is expected to be completed by June 28, 2029. This award is the result of a competitive acquisition and three offers were received. Fiscal 2019 operations and maintenance funds in the amount of $2,464,648 are being obligated at the time of award. The contracting activity is Air Force Life Cycle Management System, Robins AFB, Georgia (FA8505-19-D-0003). The Rockhill Group Inc., Moline, Florida, has been awarded a $12,211,850 firm-fixed-price contract for Air Force Special Operations Command (AFSOC) aircrew instruction instructor support required by the 492 Special Operations Wing and operational wings. This contract provides for critical flying training unit support instruction (platform, simulator and flight) to all students going through AFSOC's initial and mission qualification school and continuation training for combat aircrews. Work will be performed at Hurlburt Field, Florida; Duke Field, Florida; Cannon Air Force Base, New Mexico; and Royal Air Force Mildenhall, United Kingdom, and is expected to be completed by Dec. 31, 2019. This award is the result of sole source acquisition. Fiscal 2019 operations and maintenance funds in the amount of $12,211,850 are being obligated at the time of award. The 765th Specialized Contracting Flight, Air Force Installation Contracting Center, Hurlburt Field, Florida, is the contracting activity (FA0021-19-C-A003). NAVY Lockheed Martin Corp., Orlando, Florida, is awarded an undefinitized contract action established under delivery order (N00019-19-F-4037) with a not-to-exceed value of $174,970,959. This delivery order against a previously issued basic ordering agreement (N00019-19-G-0011) provides for engineering, testing, product support and ancillary support to update the current Long Range Anti-Ship Missile components and systems required to achieve objective requirements in the Offensive Anti-Surface Warfare Increment 1 Capability Description Document. Work will be performed in Orlando, Florida (58%); Wayne, New Jersey (20%); Nashua, New Hampshire (15%); Troy, Alabama (6%); and Ocala, Florida (1%), and is expected to be completed in November 2022. Fiscal 2019 research, development, test and evaluation (Navy) funds in the amount of $40,000,000 will be obligated at time of award, none of which will expire at the end of the fiscal year. The Naval Air Systems Command, Patuxent River, Maryland, is the contracting activity. Construction Development Services Inc.,* Norfolk, Virginia (N40085-16-D-6348); Cram Roofing Co.,* San Antonio, Texas (N40085-16-D-6349); Gallaher Management Group Inc.,* Greenville, North Carolina (N40085-16-D-6350); Industrial Contract Service Corp.,* Wilmington, North Carolina (N40085-16-D-6351); Quality Roofers & Guttering, Inc.,* Jacksonville, North Carolina (N40085-16-D-6352); and Service Disabled Contracting Group, Inc.,* Norfolk, Virginia (N40085-16-D-6353), are awarded a combined amount $50,000,000 firm-fixed-price modification to increase the maximum dollar value of indefinite-delivery/indefinite-quantity multiple award construction contracts for roofing construction services within the Marine Corps installations east area of responsibility. The work to be performed provides for replacement and installation of roofs and associated materials. Projects include roof repair and replacement of new and existing roofs. Projects may require new construction, design, alteration or maintenance and repair of existing roofs. Roofs may be sloped or flat. After award of this modification, the total maximum dollar value for all six contracts combined will be $95,000,000. Work will be performed at Navy and Marine Corps installations at various locations including, but not limited to, North Carolina (90%); Georgia (3%); South Carolina (3%); Virginia (3%); and other areas of the U.S. (1%), and is expected to be completed by February 2021. No funds will be obligated at the time of award; funds will be obligated on individual task orders as they are issued. Future task orders will be primarily funded by operation and maintenance (Marine Corps); and military construction funds. The Naval Facilities Engineering Command, Mid-Atlantic, Norfolk, Virginia, is the contracting activity. Heffler Contracting Group Inc.,* El Cajon, California, is awarded a maximum amount $25,000,000 indefinite-delivery/indefinite-quantity contract for other specialty trade contractors construction alterations, renovations and repair projects at Marine Corps Air Ground Combat Center, Twentynine Palms, Marine Corps Logistics Base, Barstow, and Mountain Warfare Training Center, Bridgeport. Projects will be primarily design-bid-build (fully designed) task orders or task order with minimal design effort (e.g. shop drawings). Projects may include, but are not limited to, alterations, repairs and construction of electrical, mechanical, painting, engineering/design, paving (asphaltic and concrete), flooring (tile work/carpeting), roofing, structural repair, fencing, heating, ventilation, air and cooling and fire suppression/protection system installation projects. Work will be performed in Twentynine Palms, California (36%); Barstow, California (36%); and Bridgeport, California (28%). The term of the contract is not to exceed 60 months with an expected completion date of July 2024. Fiscal 2019 operations and maintenance (Navy) contract funds in the amount of $5,000 are obligated on this award and will expire at the end of the current fiscal year. Future task orders will be primarily funded by operations and maintenance (Navy). This contract was competitively procured via the Navy Electronic Commerce Online website, with seven proposals received. The Naval Facilities Engineering Command Southwest, San Diego, California, is the contracting activity (N62473-19-D-2631). Elite Pacific Construction Inc.,* Kaneohe, Hawaii, is awarded $12,665,000 for firm-fixed-price task order N62478-19-F-4158 under a previously awarded multiple award construction contract (N62478-18-D-4022) to overhaul the Drydock No. 2 intermediate caisson to maintain its 10-year certification at Joint Base Pearl Harbor-Hickam (JBPHH). The work to be performed provides for 10-year ultrasonic testing of the caisson structural members and plating in accordance with Military Standard 1625D including, but not limited to, plating of the entire hull, top deck (weather deck), machinery deck, internal strength decks, bulkheads including breast hooks, ballast tank and machinery deck internal structural members such as stiffeners, truss frame members and seachests/ballast piping seaward of the first closure valve. Other repair scope items include sandblasting and preserving interior and exterior surfaces of the caisson, including the weather deck; cleaning, priming and painting all interior and exterior surfaces of the caisson; removing existing non-skid coating from the weather deck; and installing industrial strength adhesive-type non-skid surface material on the weather deck and machinery deck. Work will be performed in Oahu, Hawaii, and is expected to be completed by October 2020. Fiscal 2019 operations and maintenance (Navy) contract funds in the amount of $12,665,000 are obligated on this award and will expire at the end of the current fiscal year. Three proposals were received for this task order. The Naval Facilities Engineering Command, Hawaii, JBPHH, Hawaii, is the contracting activity. Raytheon Co., McKinney, Texas, is awarded an $8,044,102 cost-plus-fixed-fee modification under previously-awarded basic ordering agreement N00164-17-G-JQ02-0004 to extend the period of performance for depot support services in support of life-cycle sustainment of the Multi-Spectral Targeting System for U.S. Navy, Army, Air Force and special operations forces platforms. Work will be performed in McKinney, Texas, and is expected to be completed by September 2021. Fiscal 2019 working capital funds in the amount of $275,000 will be obligated at time of award and will not expire at the end of the current fiscal year. The Naval Surface Warfare Center, Crane Division, Crane, Indiana, is the contracting activity. Tompco Inc.,* Seabeck, Washington, is awarded $8,209,449 for firm-fixed-price task order N44255-19-F-4274 under a previously awarded multiple award construction contract (N44255-17-D-4014). The work will convert the Perch-Pickerel Housing area from family housing to unaccompanied housing consisting of 24 buildings with 18 eight-unit buildings and six four-unit buildings at Naval Base Kitsap, Bangor. The work to be performed includes: replace and install new carpet where required; add exterior lighting to all buildings; change thermostats in each unit; install building and unit number placards at each building and unit; remove existing playgrounds; install two picnic shelters and BBQs; replace entry doors to each unit; remove existing mailboxes; and provide fire protection. The task order also contains two unexercised options, which if exercised, would increase cumulative task order value to $12,689,449. Work will be performed in Silverdale, Washington, and is expected to be completed by Aug. 4, 2020. Fiscal 2019 Commander Navy Installation Command contract funds in the amount of $8,209,449 are obligated on this award and will expire at the end of the current fiscal year. Two proposals were received for this task order. The Naval Facilities Engineering Command, Northwest, Silverdale, Washington, is the contracting activity. ARMY Patton-Tully Marine Inc.,* Memphis, Tennessee (W912EQ-19-D-0002); Luhr Bros. Inc., Columbia, Illinois (W912EQ-19-D-0001); Pine Bluff Sand and Gravel Whitehall, Arizona (W912EQ-19-D-0003); Bertucci Contracting Co.,* Jefferson, Louisiana (W912EQ-19-D-0004); and Choctaw Transportation Co. Inc.,* Dyersburg, Tennessee (W912EQ-19-D-0005), will compete for each order of the $150,000,000 firm-fixed-price contract for maintaining the Mississippi River and tributaries channel improvement project. Bids were solicited via the internet with five received. Work locations and funding will be determined with each order, with an estimated completion date of July 3, 2024. U.S. Army Corps of Engineers, Memphis, Tennessee, is the contracting activity. NCI Information Systems, Reston, Virginia, was awarded a $27,956,232 modification (P00005) to contract W91RUS-18-C-0017 for information technology services for cyber network operations and security support. Work will be performed in Fort Huachuca, Arizona, with an estimated completion date of June 30, 2020. Fiscal 2018 operations and maintenance, Army funds in the amount of $10,251,101 were obligated at the time of the award. U.S. Army Contracting Command, Aberdeen Proving Ground, Maryland, is the contracting activity. RSCI, Boise, Idaho, was awarded a $21,623,000 firm-fixed-price contract to design and construct a 42,000 square foot Red Flag 5th Generation facility addition. Bids were solicited via the internet with eight received. Work will be performed in Nellis Air Force Base, Nevada, with an estimated completion date of June 22, 2021. Fiscal 2019 defense military construction funds in the amount of $21,623,000 were obligated at the time of the award. U.S. Army Corps of Engineers, Los Angeles, California, is the contracting activity (W912PL-19-C-0023). LGC Global Inc., Detroit, Michigan, was awarded an $11,311,046 firm-fixed-price contract for construction of a physical fitness center at Niagara Falls Air Reserve Station, New York. Bids were solicited via the internet with four received. Work will be performed in Niagara Falls, New York, with an estimated completion date of July 15, 2021. Fiscal 2019 Air Force Reserve military construction funds in the amount of $11,311,046 were obligated at the time of the award. U.S. Army Corps of Engineers, Louisville, Kentucky, is the contracting activity (W912QR-19-C-0021). AECOM Management Services Inc., Germantown, Maryland, was awarded a $9,866,058 modification (P00144) to contract W58RGZ-16-C-0001 for aviation maintenance services and limited depot support. Work will be performed in Fort Campbell, Kentucky, with an estimated completion date of Dec. 29, 2019. Fiscal 2017, 2018 and 2019 operations and maintenance, Army; operations and maintenance, Army Reserve; and other procurement, Army funds in the combined amount of $9,866,058 were obligated at the time of the award. U.S. Army Contracting Command, Redstone Arsenal, Alabama, is the contracting activity. *Small business https://dod.defense.gov/News/Contracts/Contract-View/Article/1896502/source/GovDelivery/

  • The Pentagon’s new space agency has an idea about the future

    July 4, 2019 | International, Aerospace, C4ISR

    The Pentagon’s new space agency has an idea about the future

    By: Nathan Strout The Defense Department's next generation space architecture would consist of several layers based around a mesh network of small communications satellites, according to a document released by the Space Development Agency July 1. A request for information lays out an early outline of what that new satellite architecture would look like and how the commercial sector can contribute to the effort. The SDA is a new entity that the Pentagon established less than four months ago as part of the Trump administration's focus on reorganizing the military's space structure. The agency's initial goal is to develop a next generation space architecture for military satellites in the face of near-peer adversaries' growing interest in space. “In an era of renewed great power competition with an emergent China and a resurgent Russia, maintaining our advantage in space is critical to winning these long-term strategic competitions,” read a request for information posted to the Federal Business Opportunities web site. “These potential adversaries are developing and demonstrating multi-domain threats to national security much faster than we can deploy responsive, space-based capabilities.” The agency wants the new architecture to provide eight essential capabilities identified in a 2018 Pentagon report. In addition, the Pentagon wants to include development of deterrent capability, space situational awareness, a resilient common ground-based space support infrastructure, command and control systems and artificial intelligence-enabled global surveillance. The Space Development Agency's notional architecture is made up of several layers, each of which would contribute to at least one of the eight essential capabilities. They include: A space transport layer: A global mesh network providing 24/7 data and communications. A tracking layer: Provides tracking, targeting and advanced warning of missile threats. A custody layer: Provides “all-weather custody of all identified time-critical targets.” A deterrence layer: Provides space situational awareness—detecting and tracking objects in space to help satellites avoid collisions. A navigation layer: Provides alternative positioning, navigation and timing services in case GPS is blocked or unavailable. A battle management layer: A command, control and communications network augmented by artificial intelligence that provides self-tasking, self-prioritization, on-board processing and dissemination. A support layer: Ground command and control facilities and user terminals, as well as rapid-response launch services. The SDA's immediate goal is the development of a transport layer consisting of a mesh network for communications and data in low earth orbit. As the agency has stated previously, that effort will rely heavily on DARPA's Blackjack program - a project that will establish an initial transport layer with a 20 satellite constellation. The SDA wants to build sub-constellations around the Blackjack program to meet some of the needs it has identified, such as missile defense warnings and targeting, alternative positioning, navigation and timing services, and more. The constellation and associated sub-constellations will be made up of small mass-produced satellites in the agency's vision, ranging from 50 to 500kg. The next-generation space architecture posting is the first request for information that the agency has posted in its brief existence, and sets a tone for what it's looking for from the commercial sector. Specifically, the SDA wants to know what capabilities and concepts the commercial sector can bring to bear on satellite buses, payloads, appliques and launches. Any proposal should fall into at least one of the suggested layers, the SDA stated. “SDA intends to leverage investments made by the private sector in space capabilities (...), as well as industry best practices (e.g., mass production techniques for spacecraft buses, sensors, and user terminals),” stated the agency. Among other things, the agency wants proposals for the following items: Small and cheap payloads that can provide high-bandwidth links between satellites; software that can track missiles from low earth orbit; software that can facilitate autonomous space sensor collection, processing and dissemination, and alternative methods for positioning, navigation and timing in case GPS is unavailable. In addition, the SDA wants feedback on the overall structure of its notional architecture. The SDA is also interested in industry concerns about data rights, security and protection, acquisition approaches and more. In building this new architecture, the SDA is clear that it wants to be agile and flexible in adapting to new technology and threats, meaning it wants to be able to integrate upgrades within two year windows. While it's not clear in the document how quickly the SDA wants to have the new architecture in place, the agency does emphasize that it is looking for efforts that can be demonstrated in less than 18 months. Responses are due on August 5. The SDA plans to hold an Industry Day to connect with the commercial sector in the near future. The document's release comes shortly on the heels of Space Development Agency Director Fred Kennedy's resignation in late June. Kennedy was the agency's first director, having been originally appointed to the position by acting Defense Secretary Patrick Shanahan when the agency was stood up March 12. Derek Tournear, the assistant director for space within the Office of the Under Secretary of Defense for Research & Engineering, was named the acting director of the agency June 24. Prior to taking the assistant director position, Tournear was the director of Harris Space and Intelligence research and development. He has also served stints at the Intelligence Advanced Research Projects Activity and the Defense Advanced Research Projects Agency. A Department of Defense spokesperson stated that Kennedy stepping down would not change the mission of activities of the agency. All of this comes as the U.S. military has worked to revamp its efforts in space. In addition to the stand up of the SDA, the Trump administration is also pushing for the creation of Space Force, a proposed sixth branch of the military that would be housed within the Air Force. While the Senate Armed Services Committee endorsed a version of Space Force, the House Armed Services Committee proposed a Space Corps, which would not be an independent branch of the military. https://www.c4isrnet.com/battlefield-tech/2019/07/03/the-pentagons-new-space-agency-has-an-idea-about-the-future/

  • Karem Aircraft announces FARA Competitive Prototype team

    July 4, 2019 | International, Aerospace

    Karem Aircraft announces FARA Competitive Prototype team

    Karem Aircraft Press Release Karem Aircraft, Northrop Grumman Corporation, and Raytheon Company have formed a team to execute the U.S. Army Future Attack Reconnaissance Aircraft Competitive Prototype (FARA CP) development contract. FARA CP will provide the U.S. Army with a new armed scout aircraft. The three companies will apply decades of combined knowledge, skills, and abilities to bring the best of vehicle and systems technologies and processes to the first aircraft within the Future Vertical Lift family of systems. Karem's unique active variable speed rotor technologies have been developed over the last decade through extensive collaboration with the U.S. Army. “Karem has enjoyed a strong partnership with the U.S. Army over the last decade collaboratively developing VTOL technologies and we look forward to leveraging the U.S. Army's investment by applying these innovative technologies to our FARA aircraft,” said Thomas Berger, Karem's program manager for FARA CP. “With our two exceptional partners, each with a strong track record of delivering combat capability in support of the warfighter, we are now able to provide a complete solution for the U.S. Army that maintains battlefield superiority into the future.” This expertise will be augmented with Northrop Grumman's manned and autonomous military aircraft development, system integration, production, and support expertise and Raytheon's systems architecture, mission equipment, and weapons capabilities. The Karem Aircraft-Northrop Grumman-Raytheon team will work collaboratively with the U.S. Army's multidisciplinary team to meet the needs of the FARA CP program. https://www.verticalmag.com/press-releases/karem-aircraft-announces-fara-competitive-prototype-team/

  • Northrop to upgrade aircraft mission computers for US and Bahrain

    July 3, 2019 | International, Aerospace

    Northrop to upgrade aircraft mission computers for US and Bahrain

    Northrop Grumman has secured a contract to perform the technical upgrade of UH-1Y, AH-1Z and UH-60V mission computers for the US and Bahrain. The $104m indefinite-delivery, indefinite-quantity (IDIQ) award will see Northrop Grumman deliver production, retrofit and spare units. Under the Foreign Military Sales Act, these units will be supplied for the US Marine Corps, the Defense Logistics Agency, and Bahrain's military. The company noted that by bringing together several mission computer customers, the contract will help deliver greater cost-efficiency while lowering the logistics footprint. The contract has the potential for placing task or delivery order awards up to the ceiling amount. Northrop Grumman is expected to complete the contract work in December 2023. Northrop Grumman land and avionics C4ISR vice-president James Conroy said: “Northrop Grumman's mission computer delivers mission-critical capability to the warfighter. The system provides improved situational understanding in the rapidly changing threat environment.” The mission computer manufactured by the firm can integrate advanced mission, weapons and video processing capabilities into a high-performance airborne computer. The computer's open architecture enables the centralised display and control of all integrated avionics system functions. These include aircraft performance and flight instruments, on-board sensor and survivability displays, in addition to improved situational awareness and health monitoring information. Furthermore, the mission computer is capable of providing improved capability, commonality, reliability and maintainability to the warfighter. Northrop Grumman will supply up to 503 technical refresh mission computers for the three helicopter models. In 2017, The US Marine Corps fielded the Northrop Grumman's Tech Refresh Mission Computer (TRMC) for the first time on the UH‑1Y and AH-1Z helicopters. Equipment was deployed under the H-1 Upgrade programme that involved replacing the UH-1N and AH-1W helicopters with revamped aircraft. https://www.naval-technology.com/news/northrop-to-upgrade-aircraft-mission-computers-for-us-and-bahrain/

  • Canada spends more than double for special forces aircraft but the reason why is a mystery so far

    July 3, 2019 | Local, Aerospace

    Canada spends more than double for special forces aircraft but the reason why is a mystery so far

    DAVID PUGLIESE Canadian special forces will receive three new surveillance aircraft from the U.S. with the planes expected to arrive in 2022. But the cost is substantially more than what the U.S. Air Force spends to buy the same or similar aircraft. The three Beechcraft King Air planes, to be based at CFB Trenton in Ontario, will be outfitted with sensors and equipment to intercept cell phone and other electronic transmissions. Canadian special forces and, potentially, other government departments will use them for missions overseas and in Canada. The agreement for the aircraft was finalized on April 26 with the U.S. government. Three aircraft and equipment will be delivered in the spring of 2022, the Canadian Forces noted. The agreement signed with the U.S. government is for $188 million (CAN). The U.S. Air Force lists the cost of the MC-12W surveillance aircraft as $17 million each or around $23 million Canadian. That includes communications/sensors and modification of the aircraft for that equipment. So three aircraft should cost in total about $70 million Canadian, give or take. It is not clear why Canada is spending more than double the cost of the aircraft than the U.S. Air Force. It could be that the aircraft are not exactly the same but does that account for more than double the cost? Postmedia asked the Canadian Forces for an explanation last week but there has been no response. If an answer is provided then this article will be updated. The main contractor for the planes is Beechcraft in Wichita, Kan. https://ottawacitizen.com/news/national/defence-watch/canada-spends-more-than-double-for-special-forces-aircraft-but-the-reason-why-is-a-mystery-so-far

  • These 4 technologies are big problems for US military space

    July 3, 2019 | International, Aerospace

    These 4 technologies are big problems for US military space

    By: Nathan Strout A recent report highlights the fact that the commercial space sector is an increasingly important part of the military's efforts in space, but there are places where industry falls short. The national security space arena is a niche market, characterized by low production runs paired with a need for high-quality products. That combination makes it a difficult area for the commercial sector. While national security space increasingly relies on industry to provide components for space vehicles, the fact remains that in some key areas there are no domestic suppliers for critical technologies, leaving the United States dependent on foreign suppliers. Here are four such technologies singled out in a recent report on the United States military's industrial base: Solar cells According to the report, the commercial sector is not investing in the research and development needed to improve solar cells, which are used to power satellites. Businesses have maxed out the capacity for triple-junction solar cells, but do not appear capable of pushing forward to four- or five-junction solar cell technology. The Pentagon also wants solar cells that are able to withstand more radiation for longer than current products on the market. Improving solar cells to get the same or more power out of even slightly smaller panels could have a major impact when it comes to launching a satellite into space, meaning that reducing solar panel size is highly valuable. Tube amplifiers Starting in the 1990s, the domestic supplier market share for traveling-wave tube amplifiers — electronic devices used to amplify radio frequency signals to high power — dropped from 50 percent to just 12 percent. While that market has shown a slight recovery, the presence of heavily subsidized companies like Thales in France make it difficult for American companies to compete. Gyroscopes Precision gyroscopes are used in spacecraft to determine altitude and are essential to providing inertial navigation systems. According to the Department of Defense, there is only one domestic supplier of hemispherical resonating gyroscopes, resulting in long lead times — the report claims that the company can only produce one to two units per month. Fiber optic gyroscopes fair better with three domestic suppliers currently manufacturing them, but those companies are themselves vulnerable to overseas supply issues with their subcomponents. Infrared detectors Just one foreign manufacturer produces the substrates necessary for space infrared detectors, and the Pentagon warns that a disruption of any more than a few months of production of the substrates could negatively impact the quality and completion of American satellites. Because of this, the U.S. government has used a Defense Production Act of 1950 provision that allows it to offer economic incentives to either develop, sustain or expand domestic production of technology critical to national defense, and an Industrial Base Analysis and Sustainment program is in the works to support the remaining two American foundries for one type of substrate. https://www.c4isrnet.com/battlefield-tech/space/2019/07/02/these-4-technologies-are-big-problems-for-us-military-space/

  • United Technologies’ F-35 Engines Chronically Late, Pentagon Says

    July 3, 2019 | International, Aerospace

    United Technologies’ F-35 Engines Chronically Late, Pentagon Says

    By Anthony Capaccio United Technologies Corp.'s Pratt & Whitney unit is chronically late delivering engines for the Pentagon's costliest program, the F-35, raising questions about whether the company is ready for a surge to full-rate production scheduled for next year. Pratt remains under a previously unreported “Corrective Action Request” from the Defense Contract Management Agency that cites “poor delivery performance” on its current batch of engines for the fighter jet, including for the most complicated version used by the Marine Corps and the U.K. for vertical takeoffs and landings. The agency's action is likely to be watched not only by the Pentagon and international buyers of the F-35 but also by shareholders and investors assessing United Technologies' planned merger with Raytheon Co., which would fortify the combined company's standing as one of the top U.S. defense contractors. The F-35 engines would be one of the new company's top revenue producers. United Technologies Corp.'s Pratt & Whitney unit is chronically late delivering engines for the Pentagon's costliest program, the F-35, raising questions about whether the company is ready for a surge to full-rate production scheduled for next year. Pratt remains under a previously unreported “Corrective Action Request” from the Defense Contract Management Agency that cites “poor delivery performance” on its current batch of engines for the fighter jet, including for the most complicated version used by the Marine Corps and the U.K. for vertical takeoffs and landings. The agency's action is likely to be watched not only by the Pentagon and international buyers of the F-35 but also by shareholders and investors assessing United Technologies' planned merger with Raytheon Co., which would fortify the combined company's standing as one of the top U.S. defense contractors. The F-35 engines would be one of the new company's top revenue producers. The company, which is the sole supplier of engines for the fighter built by Lockheed Martin Corp., must demonstrate by year-end that it has delivered on promised improvements to solve the problems that led to the agency's formal request in December, spokesman Mark Woodbury said in a statement outlining the issues. Full Production The $428 billion F-35 program is scheduled for approval next year to enter full-rate production, the most lucrative phase of a weapons program for contractors. The decision is contingent on an assessment during the aircraft's current round of intensive combat testing that it's effective and can be maintained. Of the $428 billion, as much as $66 billion is to be spent on at least 2,470 engines -- designated the F135 -- for U.S. jets, including $53.4 billion in procurement, according to the Defense Department's latest Selected Acquisition Report on the F-35. Pentagon budget documents indicate the engine program is valued at about $2 billion annually for Pratt, according to Bloomberg Intelligence analyst Douglas Rothacker. John Thomas, a spokesman for Pratt, said in an emailed statement that “we take seriously our responsibility to meet F135 production commitments. The corrective action plan submitted earlier this year lays out how we are doing that. Over the past year, we have invested more than $200 million for additional capacity, and currently have over 100 Pratt & Whitney employees deployed to our supplier facilities in support of production obligations.” Revenue Potential Pratt & Whitney President Bob Leduc underscored the engine's revenue potential to analysts June 17 at the Paris Air Show. United Technologies Corp.'s Pratt & Whitney unit is chronically late delivering engines for the Pentagon's costliest program, the F-35, raising questions about whether the company is ready for a surge to full-rate production scheduled for next year. Pratt remains under a previously unreported “Corrective Action Request” from the Defense Contract Management Agency that cites “poor delivery performance” on its current batch of engines for the fighter jet, including for the most complicated version used by the Marine Corps and the U.K. for vertical takeoffs and landings. The agency's action is likely to be watched not only by the Pentagon and international buyers of the F-35 but also by shareholders and investors assessing United Technologies' planned merger with Raytheon Co., which would fortify the combined company's standing as one of the top U.S. defense contractors. The F-35 engines would be one of the new company's top revenue producers. The company, which is the sole supplier of engines for the fighter built by Lockheed Martin Corp., must demonstrate by year-end that it has delivered on promised improvements to solve the problems that led to the agency's formal request in December, spokesman Mark Woodbury said in a statement outlining the issues. Full Production The $428 billion F-35 program is scheduled for approval next year to enter full-rate production, the most lucrative phase of a weapons program for contractors. The decision is contingent on an assessment during the aircraft's current round of intensive combat testing that it's effective and can be maintained. Of the $428 billion, as much as $66 billion is to be spent on at least 2,470 engines -- designated the F135 -- for U.S. jets, including $53.4 billion in procurement, according to the Defense Department's latest Selected Acquisition Report on the F-35. Pentagon budget documents indicate the engine program is valued at about $2 billion annually for Pratt, according to Bloomberg Intelligence analyst Douglas Rothacker. John Thomas, a spokesman for Pratt, said in an emailed statement that “we take seriously our responsibility to meet F135 production commitments. The corrective action plan submitted earlier this year lays out how we are doing that. Over the past year, we have invested more than $200 million for additional capacity, and currently have over 100 Pratt & Whitney employees deployed to our supplier facilities in support of production obligations.” Revenue Potential Pratt & Whitney President Bob Leduc underscored the engine's revenue potential to analysts June 17 at the Paris Air Show. “So another way to think about the F135 is a year ago we made about eight engines a month,” he said. “Right now we are between 13 and 14 engines a month. But when you think about the F135, it's 16 engines a month for the next 30 years. There will be over 4,000 of these airplanes when it's all said and done,” including foreign sales. The primary issues resulting in late engine deliveries “have been related to supply-chain capacity, material shortages” and production issues, according to the contract management agency. “Engine test failures due to high vibrations and foreign object debris continues to plague” production, the agency said in an internal quarterly assessment for January through March. Deliveries of the Marine Corps model engines “have been consistently late,” it said. As of early June, Pratt & Whitney was contractually required to deliver 108 engines in the latest production contract, the program's 11th. Of the 90 delivered, 88 were “late by an average of 40 days,” Woodbury said in his statement. The Pentagon is close to finalizing the award of the 12th and largest F-35 contract to date with Lockheed and Pratt. Spotty Record The current delays add to Pratt & Whitney's spotty track record. Even as deliveries increased to 81 in 2018 from 48 in 2012, 86% of those were delivered late, up from 48% in late 2017, according to an April report from the Government Accountability Office. Asked whether the contract management agency has confidence Pratt will be ready for a full-production decision, Woodbury said the agency is monitoring milestones in Pratt's corrective action plan and needs to see progress before making that judgment. The agency's assessment said that in light of Pratt & Whitney's track record it believes the company “will encounter issues keeping up with demand for any future low-rate and full-rate production contract” that increases quantities. — With assistance by Rick Clough https://www.bloomberg.com/news/articles/2019-07-02/united-technologies-pratt-slow-on-f-35-engines-pentagon-says

  • Contract Awards by US Department of Defense - July 2, 2019

    July 3, 2019 | International, Aerospace, Naval, Land, C4ISR, Security, Other Defence

    Contract Awards by US Department of Defense - July 2, 2019

    NAVY Lockheed Martin Corp., Lockheed Martin Aeronautics Co., Fort Worth, Texas, is awarded $348,223,161 for modification P00019 to a previously awarded cost-plus-fixed-fee contract (N00019-17-C-0001). This modification is for production non-recurring, special tooling and special test equipment in support of low-rate initial production Lot 12 F-35 Lightning II aircraft for the Air Force, Navy, Marine Corps, non-U.S. Department of Defense (DoD) partners and foreign military sales (FMS) customers. Work will be performed in Fort Worth, Texas (23.80%); El Segundo, California (23.86%); San Diego, California (17.03%); Samlesbury, United Kingdom (7.65%); Orlando, Florida (6.63%); Cedar Rapids, Iowa (3.44%); Nashua, New Hampshire (2.71%); Clearfield, Utah (2.15%); Marietta, Georgia (1.77%); East Aurora, New York (1.59%); Palmdale, California (1.40%); Cheltenham, United Kingdom (0.96%); Turin, Italy (0.81%); Clearwater, Florida (0.79%); Melbourne, Florida (0.60%); Irvine, California (0.58%); Kongsberg, Norway (0.53%); Arlington, Texas (0.48%); Rolling Meadows, Illinois (0.46%); Tempe, Arizona (0.38%); Inglewood, California (0.33%); Papendrecht, Netherlands (0.28); Garden Grove, California (0.21%); Montmorency, Australia (0.20%); Marion, Virginia (0.17%); Independence, Ohio (0.14%); Amesbury, Massachusetts (0.13%); Rome, New York (0.13%); Los Angeles, California (0.10%); Hot Springs, Arkansas (0.10%); Lystrup, Denmark (0.09%); Grand Rapids, Michigan (0.09%); Owego, New York (0.07%); Sharon, Massachusetts (0.06%); Wichita, Kansas (0.06%); Boulder, Colorado (0.05%); Carlsbad, California (0.04%); Ontario, California (0.04%); Delta, British Columbia, Canada (0.03%); Long Beach, California (0.01%); Lindenhurst, New York (0.01%); Eskisehr, Turkey (0.01%); Saint Peters, Missouri (0.01%); Santa Fe Springs, California (0.01%); and Rancho Cucamonga, California (0.01%). Work is expected to be completed in August 2022. Fiscal 2017 aircraft procurement (Navy and Marine Corps); fiscal 2018 and 2019 aircraft procurement (Air Force, Navy and Marine Corps); non-U.S. DoD partner and FMS funds in the amount of $348,223,161 are being obligated at time of award, $17,899,115 of which will expire at the end of the current fiscal year. This modification combines purchases for the Air Force ($129,642,270; 38%); Navy ($69,738,685; 20%); Marine Corps ($61,001,500; 17%); non-U.S. DoD partners ($60,840,706; 17%) and FMS customers ($27,000,000; 8%). The Naval Air Systems Command, Patuxent River, Maryland, is the contracting activity. Anchor Innovation Inc.,* Virginia Beach, Virginia (N50054-19-D-1901); Beach Marine Services Inc.,* Portsmouth, Virginia (N50054-19-D-1902); Colonna's Shipyard Inc.,* Norfolk Virginia (N50054-19-D-1903); East Coast Repair & Fabrication LLC,* Norfolk, Virginia (N50054-19-D-1904); Fairlead Boatworks Inc.,* Newport News, Virginia (N50054-19-D-1905); Lyon Shipyard Inc.,* Norfolk, Virginia (N50054-19-D-1906); Q.E.D. Systems, Inc.,* Virginia Beach, Virginia (N50054-19-D-1907); United States Marine Inc.,* Gulfport, Mississippi (N50054-19-D-1908); and Willard Marine Inc.,* Virginia Beach, Virginia (N50054-19-D-1909) for Mid-Atlantic Regional Maintenance Center Marine Boatyard and Industrial Support for Lot I, and Colonna's Shipyard Inc.,* Norfolk, Virginia (N50054-19-D-1910); East Coast Repair and Fabrication LLC,* Norfolk, Virginia (N50054-19-D-1911); Fairlead Boatworks Inc.,* Newport News, Virginia (N50054-19-D-1912); and Lyon Shipyard Inc.,* Norfolk, Virginia (N50054-19-D-1913) for Mid-Atlantic Regional Maintenance Center Marine Boatyard and Industrial Support for Lot II, are each awarded firm-fixed-price, indefinite-delivery/indefinite-quantity, multiple award contracts to furnish the management, material support services, labor, supplies and equipment deemed necessary to provide marine boatyard and industrial support which includes modifications, upgrades, service life extension and repairs to non-commissioned boats, crafts, lighterage and service craft and/or their associated systems and periodic maintenance. These contracts include options which, if exercised, would bring the cumulative ceiling value to $216,979,810. These nine small businesses will have the opportunity to provide offers for individual delivery orders. Work will be performed in the Hampton Roads, Virginia, area and is expected to be complete by July 2020, and work is expected to be completed by July 2024, if all options are exercised. Fiscal 2019 operations and maintenance (Navy) funding in the amount of $32,500 ($2,500 minimum guarantee per contract) was obligated under each contract's initial delivery order and expires at the end of the current fiscal year. These contracts were competitively procured via the Federal Business Opportunities website with nine offers received. The Navy's Mid-Atlantic Regional Maintenance Center, Norfolk, Virginia, is the contracting activity. Leidos Inc., Reston, Virginia, is awarded a maximum $99,000,000 cost-plus-fixed-fee, indefinite-delivery/indefinite-quantity, single award task order contract for aerospace medical and environmental health research support services at the Naval Medical Research Unit-Dayton. Work will be performed in Dayton, Ohio, and is expected to be completed by July 7, 2024. Fiscal 2019 research, development, testing and evaluation (Navy) funding in the amount of $1,000,000 will be obligated upon award under an initial incrementally funded task order and the funds will not expire at the end of the current fiscal year. This contract was competitively procured via the Federal Business Opportunities website, with six offers received. The Naval Medical Logistics Command, Fort Detrick, Maryland, is the contracting activity (N62645-19-D-5005). RWG (Repair & Overhauls) USA Inc., Houston, Texas (N64498-19-D-4019); and the Canadian Commercial Corp. representing Standard Aero Energy Co. (SAE) Winnipeg, Manitoba (N64498-19-D-4020) are each awarded an indefinite-delivery/indefinite-quantity, firm-fixed-price contract for depot level overhaul of Navy 501-K34 marine gas turbine engines for a program cumulative value of $70,000,000. The 501-K34 marine gas turbine engines are used on the Navy ship class DDG-51. Orders will be competed between both offerors. Work under N64498-19-D-4019 will be performed in Houston, Texas, and work under N64498-19-D-4020 will be performed in Winnipeg, Manitoba, and is expected to be completed by March 2024. No funding will be obligated at time of award. Funds will be obligated as individual orders are issued. These contracts were not competitively procured, in accordance with 10 U.S. Code 2304(c)(1), Limited Number of Responsible Sources. The Naval Surface Warfare Center, Philadelphia Division, Philadelphia, Pennsylvania, is the contracting activity. Sikorsky Aircraft Corp., a Lockheed Martin Co., Stratford, Connecticut, is awarded a $21,689,142 cost-plus-fixed-fee delivery order (N00019-19-F-2972) against a previously issued basic ordering agreement (N00019-19-G-0029). This order procures the CH-53K Data Transfer Unit and Defensive Electronic Countermeasure System Replacement program and includes necessary Non Recurring Engineering (NRE) to replace existing subsystems within the CH-53K production aircraft. NRE tasks include investigation, systems engineering support, risk analysis, integration development, weight impact and publication updates. Work will be performed in Stratford, Connecticut (44.02%); Cedar Rapids, Iowa (41.74%); Fort Worth, Texas (7.41%); Vergennes, Vermont (2.81%); City of Industry, California (1.9%); Costa Mesa, California (1.18%); and various locations within the continental U.S. (.94%), and is expected to be completed in January 2021. Fiscal 2017 aircraft procurement (Navy) funds in the amount of $21,689,142 will be obligated at time of award, all of which will expire at the end of the current fiscal year. The Naval Air Systems Command, Patuxent River, Maryland, is the contracting activity. Epsilon Systems Solutions Inc.,* Portsmouth, Virginia, is awarded a $14,589,487 firm-fixed-price, indefinite-delivery/indefinite-quantity contract for the repair, restoration, overhaul, assembly and test services of the Naval Submarine Universal Modular Mast (UMM). The UMM systems will be completely overhauled off-hull at the vendor's facility to a ready-for-issue status to support the fleet during maintenance availabilities. Required services will be determined on an individual task order level. Work will be performed in Portsmouth, Virginia, and is expected to be completed by July 2024. Fiscal 2019 operation and maintenance (Navy) funding in the amount of $566,676 will be obligated at time of award via the first task order and will expire at the end of the current fiscal year. This contract was competitively procured via the Federal Business Opportunities website, with two offers received. The Naval Surface Warfare Center, Philadelphia Division, Philadelphia, Pennsylvania, is the contracting activity (N64498-19-D-4027). Frequentis Defense Inc., Columbia, Maryland, is awarded an $8,454,481 firm-fixed-price contract for non-recurring engineering and logistics for the design, development, test, manufacture and repair of the MD-5A Unmanned Carrier Aviation Mission Control System, which will support the MQ-25 Stingray unmanned air vehicle. The integrated computer system will transport voice communications from carrier-based air vehicle operators to local audio switches, local radio terminals and remote radio terminals. Work will be performed in Columbia, Maryland, and is expected to be completed in March 2021. Fiscal 2019 research, development, test and evaluation (Navy) funds in the amount of $8,454,481 will be obligated at time of award, none of which will expire at the end of the current fiscal year. This contract was not competitively procured pursuant to Federal Acquisition Regulation 6.302-1. The Naval Air Warfare Center Aircraft Division, Lakehurst, New Jersey, is the contracting activity (N68335-19-C-0276). Tompco Inc.,* Seabeck, Washington, is awarded $8,221,449 for firm-fixed-price task order N44255-19-F-4283 under a previously awarded multiple award construction contract (N44255-17-D-4014) for the RM #19-0166 asbestos abatement and replacement of steam condensate and high pressure drain systems, Naval Base Kitsap, Puget Sound, Naval Shipyard and Intermediate Maintenance Facility, Bremerton, Washington. Scope of work includes the abatement of asbestos and replacement of systems throughout the steam distribution system to improve worker safety. This project consists of High Efficiency Particulate Air (HEPA) vacuuming all surfaces, wet wiping, scraping, shoveling, scrubbing and/or mopping where HEPA vacuuming is inadequate to containment and removal of any mud, sand, soil and dust/debris from surfaces including floors, abandoned piping removal and replacement of piping and insulation. The project area is DD5 service gallery and all connected laterals, trenches, utilidors, etc. The work will be performed in Bremerton, Washington, and is expected to be completed by Feb. 3, 2020. Fiscal 2019 working capital contract funds in the amount of $8,221,449 are obligated on this award and will not expire at the end of the current fiscal year. Five solicitation emails were sent and four proposals were received for this task order. The Naval Facilities Engineering Command (NAVFAC), Northwest, Silverdale, Washington, is the contracting activity for the basic contract and the NAVFAC Bremerton Field Engineering, Acquisition Department is the contracting activity for the task order. Sikorsky Aircraft Corp., a Lockheed Martin Co., Stratford, Connecticut, is awarded $7,103,403 for cost-plus-fixed-fee order N00019-19-F-2555 against a previously issued basic ordering agreement N00019-19-G-0029. This order procures non-recurring engineering, development, tooling, manufacturing, qualification, reporting and delivery of the nose, main, intermediate and tail gearbox gears in support of the low rate initial production of the CH-53K aircraft. Work will be performed in Stratford, Connecticut, and is expected to be completed in October 2020. Fiscal 2018 aircraft procurement (Navy) funds in the amount of $7,103,403 will be obligated at time of award, none of which will expire at the end of the current fiscal year. The Naval Air Systems Command, Patuxent River, Maryland, is the contracting activity. ARMY Yulista Support Services,* Huntsville, Alabama, was awarded a $226,911,155 cost-plus-fixed-fee contract for maintenance and modifications of C5ISR flight activity platforms. Bids were solicited via the internet with zero received. Work locations and funding will be determined with each order, with an estimated completion date of June 19, 2024. U.S. Army Contracting Command, Aberdeen Proving Ground, Maryland, is the contracting activity (W56KGU-19-D-0002). Cornforth Consultants Inc.,* Portland, Oregon (W91237-19-D-0016); K S Ware & Associates LLC,* Nashville, Tennessee (W91237-19-D-0017); and Aterra-Schnabel JV,* Ambler, Pennsylvania (W91237-19-D-0015), will compete for each order of the $15,000,000 firm-fixed-price contract for national dam safety engineering and design services. Bids were solicited via the internet with 10 received. Work locations and funding will be determined with each order, with an estimated completion date of July 1, 2024. U.S. Army Corps of Engineers, Huntington, West Virginia, is the contracting activity. AIR FORCE Leidos Inc., Reston, Virginia, has been awarded a $66,752,500 cost-plus-fixed-fee contract for rapid technology development and demonstrations. This contract provides for the development of new/novel concepts for sensor and systems of sensor systems across the multiple domains and spectrums that aid in command, control, communications, computers, intelligence, surveillance and reconnaissance and battlespace awareness. Work will performed in Reston, Virginia, with base support at Wright-Patterson Air Force Base, Ohio, and is expected to be completed by June 12, 2024. This award is a result of a competitive acquisition and two offers were received. Fiscal 2019 research, development, test and evaluation funds in the amount of $546,050 are being obligated at the time of award. Contracting activity is the U.S. Air Force, Air Force Materiel Command, Air Force Research Laboratory, Wright-Patterson AFB, Ohio (FA8650-19-C-1941). Engility Corp., Andover, Massachusetts, has been awarded a $40,000,000 firm-fixed-price/cost reimbursement/cost-plus-fixed-fee, indefinite-delivery/indefinite-quantity contract for services supporting the Space and Missile Systems Center, Advanced Systems and Development Directorate, Ground Systems and Space Operations Division at Kirtland Air Force Base, New Mexico. This contract provides engineering, development, integration and sustainment services supporting the current ground system enterprise throughout its evolution, including the transition to and buildout of enterprise ground services. Work will be performed at Kirtland AFB, New Mexico; Schriever AFB, Colorado; Buckley AFB, Colorado; Colorado Springs, Colorado; Space Based Infrared Radar Payload On-Orbit Test Station facility, Azusa, California; the Space Management Battle Lab, Colorado Springs, Colorado; Vandenberg AFB, California, as well as future sites at Naval Research Laboratory, Blossom Point, Maryland, and is expected to be completed by Sept. 20, 2019. This award is the result of a sole source acquisition. Space and Missile Systems Center, Advanced Systems & Development Directorate, Kirtland AFB, New Mexico, is the contracting activity (FA8818-19-D-0004). General Dynamics Information Technology Inc., doing business as General Dynamics Mission Systems, Fairfax, Virginia, have been awarded a $35,683,952, cost-plus-incentive-fee modification (P00015) to previously awarded FA8307-17-F-0004 for next generation GEO overhead persistent infrared (NGG-OPIR). The contract modification provides for additional Medium/LargeSat Common Solutions (MLCS) variants for the NGG-OPIR program, additional MLCS engineering development modules, increased tempest testing and to fund an overrun. Work will be performed at General Dynamics Mission System, Scottsdale, Arizona, and is expected to be completed by March 31, 2022. Fiscal 2019 research and development funds in the amount of $12,726,494.04 are being obligated at the time of award. The Air Force Life Cycle Management Center, Cryptologic Systems Division, Contracting Division, Joint Base San Antonio, Texas, is the contracting activity. DEFENSE LOGISTICS AGENCY Valley Apparel, LLC,* Knoxville, Tennessee, has been awarded a maximum $10,794,000 firm-fixed-price, indefinite-delivery/indefinite-quantity contract for Navy working uniform parkas. This was a competitive acquisition with two responses received. This is a one-year base contract with two one-year option periods. Location of performance is Tennessee, with a July 1, 2020 performance completion date. Using military service is Navy. Type of appropriation is fiscal 2019 through 2020 defense working capital funds. The contracting activity is the Defense Logistics Agency, Troop Support, Philadelphia, Pennsylvania (SPE1C1-19-D-1172). *Small business https://dod.defense.gov/News/Contracts/Contract-View/Article/1895053/source/GovDelivery/

  • GA-ASI Announces Streamlined ISR Tools for UAS

    July 3, 2019 | International, Aerospace

    GA-ASI Announces Streamlined ISR Tools for UAS

    Author: Mike Rees General Atomics Aeronautical Systems, Inc. (GA-ASI) has unveiled its new Integrated Intelligence Center (I2C), which presents innovative ways to improve the user experience for operators of Remotely Piloted Aircraft (RPA) using automation and user experience-based design (UX). “I2C will rapidly transform data into actionable intelligence,” said David R. Alexander, president, GA-ASI. “We see benefits to the warfighter on many fronts, including the reduction of operational cost – whether it's Ground Ops, Air Ops, or Intel Ops. By combining XC2, Automatic Takeoff and Landing, MMC and our single-seat Certifiable Ground Control Station, we will reduce manning by 50 percent.” GA-ASI's modular and open software architecture designs promote horizontal integration of third party software and rapid integration of new capabilities, making the following developments the ideal set of Intelligence, Surveillance and Reconnaissance (ISR) tools for streamlined and improved collaboration: eXpeditionary Command & Control (XC2): XC2 laptop leverages GA-ASI's Advanced Cockpit development by porting select capabilities to a ruggedized laptop. A forward-deployed maintainer can use the laptop to employ automated pre-flight and post-flight checklists that reduce setup times by up to 50 percent, and reduces the airlift requirements by eliminating the need for a forward-deployed Ground Control Station (GCS). Certifiable Ground Control Station (CGCS): The CGCS enables single-seat operations to reduce manpower requirements. Its tactical situation display unifies ISR and C4ISR data, as well as mission planning into a single Common Operating Picture (COP). The integrated Collins Pro Line Fusion enables CGCS certifiability for operation in national airspace. Multi-Mission Controller (MMC): The MMC enables a single user to safely control multiple aircraft and perform transit and routine ISR missions using a hand controller. When an aircraft is tasked with performing more dynamic ISR or a strike mission, MMC allows a rapid handoff of the aircraft to a dedicated GCS, where a mission crew can take control. Metis – Automated intelligence Collection Management: Metis is a map-based interface that enables a pre-approved Metis user to request ISR products from the RPA, similar to ordering a car from Uber. Once the Metis user sends a task, it's transmitted to MMC in real time. The MMC user selects the task and an integrated third party auto-router automatically generates a safe route to the requested target. STARE Imagery: The System for Tactical Archival, Retrieval, and Exploitation's (STARE) Common Operation Picture shows aircraft locations, where the operator can look and what they are looking at. The Multi-INT exploitation tool ingests, archives, disseminates and makes ISR data discoverable for imagery analysts to utilize. STARE reduces data exploitation tasks from hours to minutes. Automation of Intel Ops: I2C integrates third party capabilities and software services to make Intel analysts more effective. Automated Activity Alerts – based on Multi-INT data correlation – reduces the need for eyes-on RPA sensor data to pick out significant activity. GA-ASI is partnering with best-of-breed companies specializing in Artificial Intelligence (AI) and Machine Learning with proven AI-based systems deployed across multiple commercial sectors. GA-ASI works with these businesses to train their AI capability with MQ-9, MQ-1C and Predator ISR data. These tools and capabilities are either operationally deployed, undergoing customer operational assessment or are actively flying aircraft. https://www.unmannedsystemstechnology.com/2019/06/ga-asi-announces-streamlined-isr-tools-for-uas/

Shared by members

  • Share a news article with the community

    It’s very easy, simply copy/paste the link in the textbox below.

Subscribe to our newsletter

to not miss any news from the industry

You can customize your subscriptions in the confirmation email.