July 3, 2019 | International, Aerospace

GA-ASI Announces Streamlined ISR Tools for UAS

Author: Mike Rees

General Atomics Aeronautical Systems, Inc. (GA-ASI) has unveiled its new Integrated Intelligence Center (I2C), which presents innovative ways to improve the user experience for operators of Remotely Piloted Aircraft (RPA) using automation and user experience-based design (UX).

“I2C will rapidly transform data into actionable intelligence,” said David R. Alexander, president, GA-ASI. “We see benefits to the warfighter on many fronts, including the reduction of operational cost – whether it's Ground Ops, Air Ops, or Intel Ops. By combining XC2, Automatic Takeoff and Landing, MMC and our single-seat Certifiable Ground Control Station, we will reduce manning by 50 percent.”

GA-ASI's modular and open software architecture designs promote horizontal integration of third party software and rapid integration of new capabilities, making the following developments the ideal set of Intelligence, Surveillance and Reconnaissance (ISR) tools for streamlined and improved collaboration:

eXpeditionary Command & Control (XC2): XC2 laptop leverages GA-ASI's Advanced Cockpit development by porting select capabilities to a ruggedized laptop. A forward-deployed maintainer can use the laptop to employ automated pre-flight and post-flight checklists that reduce setup times by up to 50 percent, and reduces the airlift requirements by eliminating the need for a forward-deployed Ground Control Station (GCS).
Certifiable Ground Control Station (CGCS): The CGCS enables single-seat operations to reduce manpower requirements. Its tactical situation display unifies ISR and C4ISR data, as well as mission planning into a single Common Operating Picture (COP). The integrated Collins Pro Line Fusion enables CGCS certifiability for operation in national airspace.
Multi-Mission Controller (MMC): The MMC enables a single user to safely control multiple aircraft and perform transit and routine ISR missions using a hand controller. When an aircraft is tasked with performing more dynamic ISR or a strike mission, MMC allows a rapid handoff of the aircraft to a dedicated GCS, where a mission crew can take control.
Metis – Automated intelligence Collection Management: Metis is a map-based interface that enables a pre-approved Metis user to request ISR products from the RPA, similar to ordering a car from Uber. Once the Metis user sends a task, it's transmitted to MMC in real time. The MMC user selects the task and an integrated third party auto-router automatically generates a safe route to the requested target.
STARE Imagery: The System for Tactical Archival, Retrieval, and Exploitation's (STARE) Common Operation Picture shows aircraft locations, where the operator can look and what they are looking at. The Multi-INT exploitation tool ingests, archives, disseminates and makes ISR data discoverable for imagery analysts to utilize. STARE reduces data exploitation tasks from hours to minutes.
Automation of Intel Ops: I2C integrates third party capabilities and software services to make Intel analysts more effective. Automated Activity Alerts – based on Multi-INT data correlation – reduces the need for eyes-on RPA sensor data to pick out significant activity. GA-ASI is partnering with best-of-breed companies specializing in Artificial Intelligence (AI) and Machine Learning with proven AI-based systems deployed across multiple commercial sectors. GA-ASI works with these businesses to train their AI capability with MQ-9, MQ-1C and Predator ISR data.

These tools and capabilities are either operationally deployed, undergoing customer operational assessment or are actively flying aircraft.

https://www.unmannedsystemstechnology.com/2019/06/ga-asi-announces-streamlined-isr-tools-for-uas/

On the same subject

September 4, 2020 | International, Aerospace, C4ISR

Counter-drone tech and state-of-the-art radar for the RAF
RAF Typhoons are to be equipped with next generation radar thanks to a £317 million investment, Defence Minister Jeremy Quin today announced. The new contract will secure over 600 jobs and make sure the UK remains at the forefront of radar technology development. The RAF is also one step closer in bringing its ORCUS technology into force, which can jam radio signals from drones and has already been successfully deployed during drone sightings at airports. Confirming the news at the Defence Procurement, Research, Technology & Exportability (DPRTE) 2020 event, the Minister, said: It is vital that our Armed Forces are equipped with the latest technology to counter emerging threats from our adversaries. Today we announce the investment in the latest in radar technology for our fighter jets and pioneering new defence systems to counter threats from drones. This demonstrates our commitment to maintaining security in the air whilst supporting highly-skilled jobs across the UK. Typhoon radar The new Typhoon radar investment will ensure the aircraft are equipped with world-class technology. Crown copyright. Typhoon aircraft will be equipped with next-generation radar thanks to £317 million investment that will allow it to locate, identify and suppress enemy air defences using high-powered jamming. The integration of the new European Common Radar System (ECRS) Mk2, which is based on Active Electronically Scanned Array (AESA) technology, will provide a capability edge in the increasingly contested battlespace. Currently fitted with mechanically-scanning radar, the Typhoon is designed to be continuously upgraded to meet operational demand no matter the challenge or threat. The ECRS Mk2 will allow the aircraft to simultaneously detect, identify and track multiple targets in the air and on the ground in the most challenging environments. Planned to be in service by the mid-2020s, the radar development programme will sustain hundreds of highly skilled jobs, including more than 300 at Leonardo's Edinburgh site and 100 at their Luton site; 120 at BAE Systems' site in Lancashire and 100 at their site in Dunfermline, Fife; and 50 at sub-contractor Meggitt in Stevenage. Counter-drone technology ORCUS counter-drone technology is part of the RAF's SYNERGIA research and development programme. Crown copyright. The Royal Air Force's SYNERGIA counter-drone research and development programme has reached a significant milestone with the ORCUS counter-drone capability achieving initial operating capability (IOC). IOC was achieved after ORCUS completed successful testing of a full range of integrated detect, track, ID, and defeat technologies. Vital to protecting UK air bases from hostile drone activity, ORCUS will enable the RAF to evaluate a range of capabilities including advanced radar, electro-optic and radio frequency sensors, plus an electronic attack countermeasure. The device looks similar to a camera module placed on top of a tripod, allowing for unparalleled versatility in operations. The technology is part of the RAF's Counter-Unmanned Aerial System (C-UAS) research and development programme with Leonardo to establish the most effective way to detect, track, identify and defeat hostile drones. Elements of Leonardo's C-UAS equipment played a supporting role in RAF Force Protection in 2018 and 2019, following drone sightings at Gatwick and Heathrow airports, allowing airport operations to resume. The current phase of the programme, which started in 2019, supports more than 50 highly skilled jobs with over 20 at Leonardo, with the primary integration work undertaken at its Basildon and Southampton sites and real-time testing taking place at several MOD locations within the UK. https://www.gov.uk/government/news/counter-drone-tech-and-state-of-the-art-radar-for-the-raf
November 23, 2020 | International, Aerospace, Naval

La Marine recevra ses trois premiers Airbus Dauphin N3 le 1er décembre
20/11/2020 08:45 | Jean-Marc Tanguy Reconditionnés par Héli-Union, les trois premiers Airbus Dauphin N3 rejoindront la base d'aéronautique navale de Hyères, première équipée. Reconditionnés par Héli-Union Ces Airbus Dauphin N3 sont reconditionnés par Héli-Union en France, en Norvège (deux appareils actuellement) et chez Hélidax dans les Landes. Le reste sera ensuite livré à la cadence de trois appareils par an en métropole (Lanvéoc) et outremer (Antilles, Réunion, Nouvelle-Calédonie, Polynésie). Le contrat de location FLIHPER (pour FLotte Intérimaire HélicoPtères EmbaRqués), couvrant dix ans d'exploitation, inclut un objectif de disponibilité extrêmement élevé (supérieur à 90%) que l'industriel dit pouvoir tenir gr'ce à sa connaissance de l'exploitation de l'offshore. Pas forcément simple avec des configurations différentes, dont certaines très complètes (pilote automatique 4 axes, boule optronique Euroflir 410). MCO partagée Des lots de déploiement sont prévus en ce sens, et Héli-Union interviendra dans le Pacifique pour assurer les visites périodiques de maintenance. Ailleurs, et notamment sur les navires d'emploi de ces appareils, la Marine assurera la maintenance en ligne. Environ 300 heures de vol seront générées par chaque appareil par an. Le contrat couvre aussi la formation initiale des pilotes et mécaniciens. Des QT de navigants ont aussi été assurées par la société dans son centre d'Angoulême. Ce sont des navigants de la Marine qui se chargeront du convoyage. En attendant l'Airbus Guépard A l'issue des dix ans, la Marine disposera de suffisamment d'Airbus Guépard pour pouvoir se passer de ces appareils. Une prolongation sera toujours possible si ce n'est pas le cas. Avec cette location, Héli-Union reconvertit ainsi son parc de Dauphin auparavant utilisés dans l'offshore (à l'exclusion d'un unique appareil), une belle martingale d'avoir réussi à faire d'un passif inutilisé par la crise de l'exploitation pétrolière une flotte de location au profit des Armées. Un exploit également réussi pour les trois H225 destinés à DGA EV. https://www.air-cosmos.com/article/la-marine-recevra-ses-trois-premiers-airbus-dauphin-n3-le-1er-dcembre-23880
February 4, 2020 | International, Aerospace, Naval, Land, C4ISR, Security

Forte présence des industriels français au salon indien Defexpo 2020
Le Pavillon France, fédéré par le Groupement des Industries de Construction et Activités Navales (GICAN) en collaboration avec le Groupement des Industries Françaises Aéronautiques et Spatiales (GIFAS), accueillera 11 entreprises sur Defexpo, salon international qui se déroulera à Lucknow en Inde du 5 au 9 février 2020. La représentation française au salon indien Defexpo est assurée par la présence de 19 entreprises représentantes de l'industrie de défense française. Il s'agit de grands groupes, mais également PME et ETI dynamiques. Cette présence marque ainsi le fort engagement de l'industrie française de la défense pour soutenir les forces armées indiennes. Les entreprises présentes sur le Pavillon France (Hall 3, stands R16 à R24, S18 et S19) sont : Arquus – Etienne Lacroix Group – Lynred – Rafale International – Rafaut Group – Roxel – RTSYS – Safran – Schneider Electric – Thales – Wartsilä Navy France. Par ailleurs, plusieurs sociétés françaises exposeront sur leur propre stand (Airbus – MBDA – Naval Group et Nexter), ou sous pavillon indien (Amphenol Interconnect – Axon'Cable – Nicomatic – Nucon Alkan – Trigo), signe de leur forte implantation dans le pays. Des rencontres entre industriels français et donneurs d'ordre indiens sont programmées tout au long de la semaine. Les industries aéronautiques, spatiales et navales françaises, rassemblées par le GIFAS et le GICAN, soutiennent la politique du «Make in India», dans les domaines de l'aéronautique, de la construction navale et de la défense. Dans cette optique, le GIFAS, le GICAN et la Society of Indian Defence Manufacturers (SIDM) organiseront un séminaire le 5 février à 15h30 dans le Seminar Hall 2. L'intention est de développer davantage le partenariat industriel entre les entreprises françaises et indiennes à tous les niveaux de la chaîne de production. Les relations stratégiques entre la France et l'Inde dans l'industrie aérospatiale sont pérennes (depuis plus de 70 ans). En 2018, une présence permanente du GIFAS en Inde a été établie à New-Delhi pour renforcer ce partenariat stratégique et développer les relations industrielles entre l'Inde et la France. En 2019, 60 membres du GIFAS sont implantés en Inde, représentant plus de 75 établissements, 20 partenariats en joint-venture et plus de 25 sites de production. https://www.aerobuzz.fr/breves-defense/forte-presence-des-industriels-francais-au-salon-indien-defexpo-2020/

All news