News

The 2019 Parliamentary Budget Officer (PBO) report has indicated that the Canadian Surface Combatant (CSC) programme will now cost C$69.8bn ($52.7bn) over 26 years. The previous report, 2017 PBO, estimated the programme would cost $61.8bn ($46.84bn). Canada plans to acquire a fleet of 15 new naval warships that will serve as the country's major surface component of maritime combat power. The revision in the total programme cost is a reflection of inflated costs due to construction delay and an increase in the size of the CSC. The break-up of the cost structure includes C$5.3bn ($4.01bn) in pre-production costs, along with C$53.2bn ($40.32bn) for production, and C$11.4bn ($8.64bn) in project-wide expenses. A major driver of costs is the increase in the displacement of the ship. The 2017 estimate was calculated on the basis of a 5,400t lightship weight, which was an estimate based on available designs for the CSC programme at the time. Following selection of the BAE Systems Type 26 Global Combat Ship design, the weight increased to 6,790t. This increase has significantly contributed to the C$8bn ($6.06bn) difference in the two project cost estimates. The updated plan cost includes project development, production, two years of spare parts and ammunition, training, government programme management, and upgrades to existing facilities. Irving Shipbuilding is the prime contractor of the surface combatant project. The company awarded a subcontract to Lockheed Martin Canada to design the CSC vessels for the Royal Canadian Navy. The Combat Ship Team responsible for design includes Lockheed Martin, BAE Systems, CAE, L3 Technologies, MDA, and Ultra Electronics Maritime Systems. Construction of the first ship under the CSC project is scheduled to take place in the early 2020s. https://www.naval-technology.com/news/canadian-surface-combatant-project-found-to-cost-more-than-52-7bn/

By Allen Cone June 25 (UPI) -- L3 Technologies Inc. was awarded a $73.7 million contract for repair, upgrades and overall services for the U.S. Navy's submarine photonics mast programs. Ninety-eight percent of the work will be performed at the company's plant in Northampton, Mass., the Department of Defense announced Monday, and is expected to be completed by June 2025. Naval fiscal 2019 other procurement funding in the amount of $2.1 million will be obligated on the first delivery order at time of award and will not expire at the end of the current fiscal year. A photonics mast is a sensor on a submarine that functions much like a periscope but without requiring a periscope tube. This prevents water leakage in the event of damage. Virginia-class submarines include two photonics masts that host visible and infrared digital cameras atop telescoping arms, allowing the ship's control room to moved down one deck and away from the hull's curvature, according to the Navy. The non hull-penetrating device significantly reduces the signature of the periscope, "making it less identifiable as a U.S. Navy submarine because it appears similar to existing periscopes," according to L3. In 2013, L-3 was awarded a $48.7 million contract from the Naval Sea Systems Command to develop and build a new, slimmer version of its photonics mast for use on Virginia-class submarines. L-3 was contracted to produce up to 29 photonics masts over a subsequent four-year period, as well as engineering services and provisioning item orders with a contract maximum ceiling value of $157 million. The newest variant is the Block 4, including the Vermont, which was christened in 2018 and became the 19th in the Virginia class. Nine other subs are currently under construction, according to the Navy. L-3, which is one the leading submarine imaging providers in the world, will officially merge with Harris Corporation in an all-stock deal that will close on Saturday after receiving regulatory approval. "Receiving these approvals marks the successful completion of a thorough regulatory review process - clearing the way for one of the largest mergers in defense industry history," William M. Brown, Chairman, CEO and president of Harris, said in a statement. The company will be named L3Harris Technologies, Inc. Harris provides services in three business segments: communication, electronic, and space and intelligence. https://www.upi.com/Defense-News/2019/06/25/L3-awarded-737M-for-Navy-submarine-photonics-mast-programs/4961561472563/

ARMY Sikorsky Aircraft Corp., Stratford, Connecticut, was awarded a $91,291,064 hybrid (cost-plus-fixed-fee and firm-fixed-price) contract to provide engineering and other support services for all versions of the H-60 Blackhawk. One bid was solicited with one bid received. Work locations and funding will be determined with each order, with an estimated completion date of June 27, 2024. U.S. Army Contracting Command, Redstone Arsenal, Alabama, is the contracting activity (W58RGZ-19-D-0079). DynCorp International LLC, Fort Worth, Texas, was awarded a $12,337,211 modification (P00034) to contract W58RGZ-17-C-0011 for modification of five C-12R aircraft to a C-12V. Work will be performed in Fort Worth, Texas, with an estimated completion date of May 31, 2023. Fiscal 2019 aircraft procurement, Army funds in the amount of $12,337,211 were obligated at the time of the award. U.S. Army Contracting Command, Redstone Arsenal, Alabama, is the contracting activity. MCR Federal LLC,* McLean, Virginia, was awarded an $8,135,050 modification (0001 20) to contract W31P4Q-16-A-0016 for technical engineering support services. Work will be performed in Redstone Arsenal, Alabama, with an estimated completion date of June 29, 2020. Fiscal 2019 foreign military sales admin and other procurement, Army funds in the amount of $8,135,050 were obligated at the time of the award. U.S. Army Contracting Command, Redstone Arsenal, Alabama, is the contracting activity. NAVY Leidos Inc., Reston, Virginia, is awarded a $62,975,474 cost-plus-fixed-fee, indefinite-delivery/indefinite-quantity contract for engineering and technical services to meet fleet requirements for Synthetic Signature Generation based training systems. This contract will provide scientific, engineering, and technical services required for the design, development, fabrication, integration, test, fleet implementation and maintenance. Work will be performed in Bethesda, Maryland, and is expected to be complete by December 2022. Fiscal 2019 other procurement (Navy), fiscal 2017 shipbuilding and conversion (Navy), and fiscal 2019 research, development, test and evaluation (Navy) funding in the amount of $10,762,779 will be obligated at time of award and will not expire at the end of the current fiscal year. This contract was competitively procured via the Federal Business Opportunities website, with one offer received. The Naval Surface Warfare Center, Carderock Division, West Bethesda, Maryland, is the contracting activity (N00167-19-D-0004). L3 Systems Co., Camden, New Jersey, is awarded an estimated $41,518,454 indefinite-delivery/indefinite-quantity, firm-fixed-price, cost-plus fixed-fee contract. The Battle Force Tactical Network program requires the procurement and integration of commercial, off-the-shelf (COTS) high frequency internet protocol and subnet relay hardware, COTS software and government off-the-shelf software into a specified configuration for the Program Executive Office Command, Control, Communications, Computers and Intelligence. This contract has a five-year ordering period up to the contract award amount. There are no options. Work will be performed in Camden, New Jersey, and work is expected to be completed by June 2024. No funding is being placed on contract and obligated at the time of award. Contract actions will be issued and funds obligated as individual delivery orders. This contract was competitively procured as a full and open competition with proposals solicited via the Federal Business Opportunities website, with three offers received. The Naval Information Warfare Systems Command, San Diego, California, is the contracting activity (N00039-19-D-0035). Wyle Laboratories Inc. (aka, KBRwyle), Huntsville, Alabama, is awarded a $41,081,160 cost-plus-fixed-fee, indefinite-delivery/indefinite-quantity contract to provide engineering, technical, operational, test and logistics services in support of the Naval Air Warfare Center Aircraft Division's (NAWCAD's) Surface/Aviation Interoperability Laboratory. In addition, this contract provides for facilities testing and laboratory equipment, installed avionics and ship-combat systems maintenance. Work will be performed at NAWCAD, Patuxent River, Maryland, and is expected to be completed in July 2024. No funds will be obligated at time of award; funds will be obligated on individual orders as they are issued. This contract was competitively procured via an electronic request for proposals; four offers were received. The Naval Air Warfare Center Aircraft Division, Patuxent River, Maryland, is the contracting activity (N00421-19-D-0070). Gilbane Federal, Concord, California, is awarded a $31,683,336 firm-fixed-price contract for unaccompanied enlisted housing at the Naval Base Guam. Buildings 5, 6, 18 and 20, will undergo conversion and alteration of each structure to house double-occupancy, permanent-party housing units and building common areas including multipurpose spaces, shared kitchens, vending areas, shared laundries and other miscellaneous support spaces. This project will also include the full renovation of the second floor existing double-occupancy permanent-party housing units in Building 18. The contract also contains one unexercised option, which if exercised, would increase cumulative contract value to $32,966,436. Work will be performed in Joint Region Marianas, Guam, and is expected to be completed by October 2022. Fiscal 2019 military construction (Navy) contract funds in the amount of $31,683,336 are obligated on this award and will not expire at the end of the current fiscal year. This contract was competitively procured via the Navy Electronic Commerce Online website, with four proposals received. The Naval Facilities Engineering Command, Pacific, Joint Base Pearl Harbor-Hickam, Hawaii, is the contracting activity (N62742-19-C-1310). BAE Systems Land & Armaments L.P., Louisville, Kentucky, is awarded $14,134,492 for a firm-fixed-price, cost-plus-fixed-fee modification to previously awarded contract N00174-19-C-0004 for one overhauled/upgraded MK45 Mod 4 gun mount, and their associated components. The 5-inch MK 45 light weight gun mount system provides an effective weapon for anti-surface, naval surface fire support, and anti-air warfare missions, and is installed aboard DDG- 51 and CG-47 class ships. This contract is to provide all necessary material and services required to overhaul and upgrade MK 45 gun mounts to support AEGIS Modernization and Arleigh Burke new construction requirements. Work will be performed in Louisville, Kentucky, and is expected to be complete by October 2023. Fiscal 2019 shipbuilding and conversion (Navy) funding in the amount of $14,134,492 will be obligated at time of award and not expire at the end of the current fiscal year. The Naval Surface Warfare Center, Indian Head Explosive Ordnance Disposal Technology Division, Indian Head, Maryland, is the contracting activity. AIR FORCE Innovative Technologies International Inc., Lynchburg, Virginia, has been awarded a $7,000,000 indefinite-delivery/indefinite-quantity contract for Katana Hardware Fabrication effort. The contract provides for concept design analysis and advanced fabrication capabilities to rapidly manufacture products meeting specific characteristics through a partnering arrangement by fulfilling research, development, test and evaluation requirements for Eglin Air Force Base, Florida, with organization-specific tasks. Work will be performed at Lynchburg, Virginia, and is expected to be completed by June 25, 2024. This contract is the result of a sole source award. Fiscal 2018 research and development funds in the amount of $24,897.00 are being obligated at the time of award. The Air Force Research Laboratory, Eglin Air Force Base, Florida, is the contracting activity, Eglin AFB, Florida (FA8651-19). *Small business https://dod.defense.gov/News/Contracts/Contract-View/Article/1887115/source/GovDelivery/

DAVID PUGLIESE The US Navy is moving ahead with its frigate program but the ship design selected by Canada, the United Kingdom and Australia won't be considered as the Americans are only considering proven vessels. Because the U.S. FFG(X) future frigate competition will only accept proven, at-sea designs, BAE Systems of the United Kingdom has decided not to enter its Type 26 Global Combat Ship in the competition, the U.S. Naval Institute's publication, USNI News, reports. The Canadian government plans to buy 15 Type 26 warships in a project now estimated by the Parliamentary Budget Officer to cost $70 billion. The project, known as Canadian Surface Combatant, is the largest single expenditure in Canadian government history. The Liberal government announced in February that it had entered into a contract with Irving Shipbuilding to acquire new warships based on the Type 26 design being built in the United Kingdom. With Canada ordering 15 of the warships, the Royal Canadian Navy will be the number one user of the Type 26 in the world. The United Kingdom had planned to buy 13 of the ships for its Royal Navy but cut that down to eight. Australia plans to buy nine of the vessels designed by BAE. But the Type 26 design is unproven. Construction of the first ship for the Royal Navy began in the summer of 2017 but that vessel is not expected to be accepted into service until 2025. Canada hopes to begin construction of its first Type 26 in the early 2020s. Alan Baribeau, a spokesman for U.S. Naval Sea Systems Command, told USNI News, the U.S. Navy requires a proven, in-the-water design for its future frigate program. “To promote and provide for full and open competition, the Navy will consider any hull form — foreign and domestic — that meets the requirements, will be built in a U.S. shipyard and has a parent design that has been through production and demonstrated (full scale) at sea,” Baribeau told USNI News. The entry of the BAE Type 26 warship in the Canadian competition was controversial from the start and sparked complaints the procurement process was skewed to favour that vessel. Previously the Liberal government had said only mature existing designs or designs of ships already in service with other navies would be accepted, on the grounds they could be built faster and would be less risky. Unproven designs can face challenges as problems are found once the vessel is in the water and operating. But the requirement for a mature design was changed and the government and Irving accepted the BAE design, though at the time it existed only on the drawing board. Company claims about what the Type 26 ship can do, including how fast it can go, are based on simulations or projections. The two other bidders in the Canadian program had ships actually in service with other navies so their capabilities were known. The Canadian Surface Combatant program is being run by Irving Shipbuilding to replace the navy's fleet of Halifax-class frigates and the Iroquois-class destroyers the navy previously operated. The updated estimate on the surface combatant program, compiled by the Parliamentary Budget Office and released June 21, covers the cost of project development, production of the ships, two years of spare parts and ammunition, training, government program management, upgrades to existing facilities, and applicable taxes. The previous Conservative government originally estimated the cost of the ships to be around $26 billion. The Department of National Defence now states that its estimate is between $56 billion and $60 billion. BAE Systems told USNI News that it would not be submitting any proposals for the U.S. FFG(X) program unless the U.S. Navy dumps its requirements for a proven hull design. The U.S. does not have any intention of changing its requirements. Four companies are expected to submit bids for the U.S. program– Austal USA, Fincantieri Marine, General Dynamics Bath Iron Works and Ingalls Shipbuilding – with deadlines of August 22 for technical proposals and September 26 for pricing proposals, the USNI News reported. The Canadian Surface Combatant program is currently in the development phase. The government projects the acquisition phase to begin in the early 2020s with deliveries to begin in the mid-2020s. The delivery of the 15th ship, slated for the late 2040s, will mark the end of that project. https://ottawacitizen.com/news/national/defence-watch/warship-selected-by-canada-wont-be-in-u-s-competition-americans-accepting-only-proven-designs

By Ed Adamczyk June 24 (UPI) -- Leidos Inc. was awarded a $72.8 million contract for work on submarine detection sonar for the U.S. Navy, the Defense Department announced. The company, based in Reston, Va., will perform work on the Transformational Reliable Acoustic Path System, or TRAPS, one of two prototypes developed by the Defense Advanced Research Projects Agency, the Defense Department agency responsible for the development of emerging technologies military applications. Leidos' Leidos' work on TRAPS comes under an indefinite quantity, cost-plus-fixed-fee contract with a three-year ordering period and no options, the Defense Department announced on Friday. The TRAPS system uses a fixed sonar mode placed on the ocean floor, exploiting advantages of operating from the seafloor, to achieve large-area surveillance of the area surrounding the submarine. Each node communicates back to a floating "stationary surface node" through a wireless acoustic modem when the ocean floor node detects a sound. The other prototype, called Submarine Hold at Risk [SHARK], has an unmanned underwater vehicle as a mobile platform to track enemy submarines. Both are part of DARPA's Distributed Agile Submarine Hunting [DASH] program. Leidos' work on the contract will be done at the company's Long Beach, Miss., facility, with an expected completion date of June 2022. https://www.upi.com/Defense-News/2019/06/24/Leidos-awarded-728M-for-Navys-TRAPS-sub-detection-system/9201561393132/

By Ed Adamczyk June 24 (UPI) -- Lockheed Martin's Rotary and Missions Systems division received a $16.2 million contract to build elements of Virginia-class submarines, the Defense Department announced. The company will manufacture multifunction modular masts for the submarines' Block V hull, which can be extended by sections, depending on the requirements of the vessels' strike capabilities. Virginia-class submarines with Block V armaments are capable of carrying Tomahawk cruise missiles. The vessels typically carry eight masts, which include a snorkel mast, two photonic masts as replacements for periscopes, high-data-rate satellite communication masts, a radar mast and an electronic warfare mast. The contract was competitively procured through the Federal Business Opportunities website and announced on Friday. It specifies options which can boost it value to $97.8 million. Work on the contract will be done at Lockheed Martin facilities in Nashua, N.H., and Syracuse, N.Y., and is expected to be completed by June 2020. If all options are exercised, the deadline will be extended to June 2024. The Naval Sea Systems Command at Washington Navy Yard in Washington, D.C., was the contracting agent. https://www.upi.com/Defense-News/2019/06/24/Lockheed-nets-162M-contract-for-Virginia-class-sub-masts/1891561390409/

By: Ben Werner WASHINGTON, D.C. – Extending the lifespans of existing ships using data-driven maintenance efforts is the best strategy for achieving a 355- ship navy, said the Naval Sea Systems Command chief engineer. The key to maintaining ships and enabling the Navy to extend their lifespans is data analytics, Rear Adm. Lorin Selby, the chief engineer and deputy commander of ship design, integration and naval engineering at NAVSEA, said Thursday at the American Society of Naval Engineers' annual Technology, Systems & Ship symposium. “I have ships with a number of sensors on them, measuring things like reduction gears, showering components, turbines, generators, water jets, air conditioning plants, high packs, a number of components, and we're actually pulling data off those ships, in data acquisition systems,” Selby said. At the Naval Surface Warfare Center Philadelphia Division, Selby's team is analyzing data gleaned from smaller ship component operations to determine how often such components need servicing, oil changes, filter changes, other maintenance actions and replacement. The process is called condition-based maintenance plus (CBM+), and Selby wants CBM to drive improvements in maintaining ships. “That's one of the things we're doing to get after utilizing the technology we have today to operate the ships we have today more efficiently and more effectively,” Selby said. The Navy has dabbled with CBM for years. A 2008 Department of Defense Conditions Based Maintenance Plus guidebook mentions NAVSEA efforts. However, two years ago at the ASNE TSS symposium, NAVSEA Commander Vice Adm. Tom Moore told USNI News that the Navy's use of CBM had perhaps gone too far and was disrupting the shipyards' ability to plan for large maintenance jobs properly. During previous attempts at incorporating CBM, there was a thought that, if major efforts like refurbishing tanks were only done when needed, rather than on a predetermined timetable, the Navy could avoid spending time and money on work ahead of need. However, that also meant that shipyards wouldn't have a clear work package before a ship showed up at the pier, adding uncertainty and, ultimately, more time and cost into the maintenance availability. This time around, Selby sees condition-based maintenance as a way to address smaller maintenance items in such a way that data analysis points a ship crew to components that are experiencing minor performance issues or otherwise showing signs they are about to fail before the failure actually occurs. This summer, a pilot program using enterprise remote monitoring will occur on an Arleigh Burke-class destroyer, he said. Data collected will be sent for analysis, and operators will learn how to use the data to understand how their systems are performing and if maintenance or repairs are needed. Selby wants to have a system of apps the Navy can use to collect data from ship components, analyze the data, share it with operators and schedule work. He wants to hold a competition for app developers to create apps the Navy will test for use in the fleet. Describing his vision, Selby said, “the systems that will be monitoring, say the turbine; it will tell the operators when a work procedure has to be performed and it will also then tap into the work package side of the house and generate a work package that gets sent to the ship, to the work center, to do the work. And if there's a part involved, it will be able to pull a part from the supply system.” Testing is occurring now, but Selby concedes there are some obstacles the Navy has to overcome before large-scale deployment. The Navy is struggling with how to transmit data securely, something Selby discussed during an earlier session at the symposium. The data also has to be secured. “The performance of any given asset is something we want to hold close. So I think what you have to do is you have to architect this from kind of the get-go with that kind of security mindset in mind,” Selby said. “You can harvest that data and you could potentially discover vulnerabilities, so you have to protect that. That's part of my project: as I do this, we're bringing that security aspect into the program.” Extending the lifespan of the Navy's current fleet is essential if the Navy is going to grow to 355-ships, Moore said during his keynote address after Selby spoke Thursday. The Navy, military planners at the Pentagon, the White House and lawmakers are all anxious to reach 355 ships as soon as possible because Moore said current forces are stretched too thin. “We in the Navy, we don't have enough forces to go everywhere we need to go, and we have a pretty fragile mix of ships, so that when we miss an availability coming out on time, or we don't build something to the schedule they're supposed to build to, there are real-world consequences to that,” Moore said. The true determining factor of whether a ship's lifespan can be extended, Moore said, is the platform's flexibility. The Arleigh Burke-class is the Navy's workhorse today because, during the past 30 years, the Navy has successfully updated its operating systems. Moving forward, Moore said extending the life of the ships in this class means back-fitting many of the older Flight I and Flight II with a scaled-back version of the AN/SPY-6(V) Air and Missile Defense Radar (AMDR) to keep these ships relevant to current and future mission needs. “If you're willing to do the maintenance on the ships, from a hull and mechanical perspective, you absolutely can keep them longer,” Moore said. “The issue is really not can you keep them 50 years; the issue is can they maintain combat relevance. If they can maintain combat relevance, we know we can keep them longer.” https://news.usni.org/2019/06/24/navy-refining-how-data-analytics-could-predict-ship-maintenance-needs

ARMY TCOM L.P., Columbia, Maryland, was awarded a $978,946,631 hybrid (cost-no-fee, cost-plus-fixed-fee, and firm-fixed-price) contract for the Persistent Surveillance Systems - Tethered engineering, logistics, operations and program management support. Bids were solicited via the internet with three received. Work locations and funding will be determined with each order, with an estimated completion date of June 19, 2024. U.S. Army Contracting Command, Aberdeen Proving Ground, Maryland, is the contracting activity (W56KGY-19-D-0020). Lockheed Martin Corp., Grand Prairie, Texas, was awarded a $561,802,200 hybrid (cost-plus-fixed-fee and fixed-price-incentive) foreign military sales (Bahrain, Poland and Romania) contract for production of Army tactical missile guided missile and launching assembly service life extension program production 3. Bids were solicited via the internet with one received. Work will be performed in Grand Prairie, Texas; Camden, Arizona; Boulder, Colorado; Clearwater, Florida; St. Louis, Missouri; Lufkin, Texas; Windsor Locks, Connecticut; and Williston, Vermont, with an estimated completion date of June 30, 2022. Fiscal 2018 and 2019 missile procurement, Army and foreign military sales funds in the combined amount of $561,802,200 were obligated at the time of the award. U.S. Army Contracting Command, Redstone Arsenal, Alabama, is the contracting activity (W31P4Q-19-C-0092). Donjon Marine, Hillside, New Jersey, was awarded a $12,170,000 firm-fixed-price contract for maintenance dredging of portions of the Newark Bay, New Jersey Federal Navigation Project. Bids were solicited via the internet with three received. Work will be performed in Newark, New Jersey, with an estimated completion date of Sept. 30, 2019. Fiscal 2019 civil works funds in the amount of $12,170,000 were obligated at the time of the award. U.S. Army Corps of Engineers, New York, New York, is the contracting activity (W912DS-19-C-0013). DEFENSE LOGISTICS AGENCY Texas Power & Associates,* Palm Harbor, Florida (SPE8EG-19-D-0117); Atlantic Diving Supply, doing business as ADS,* Virginia Beach, Virginia (SPE8EG-19-D-0112); Berger/Cummins, Washington, District of Columbia (SPE8EG-19-D-0113); Caterpillar Defense, Peoria, Illinois (SPE8EG-19-D-0114); Inglett & Stubbs International, Atlanta, Georgia (SPE8EG-19-D-0115); and QGSI-USA Emergency Power, Houston, Texas (SPE8EG-19-D-0116), are sharing a maximum $900,000,0000 fixed-price, indefinite-delivery/indefinite-quantity contract under solicitation SPE8EG-18-R-0007 for generators. This was a competitive acquisition with eight offers received. These are five-year contracts with no option periods. Locations of performance are Florida, Virginia, Washington, District of Columbia, Illinois, Georgia and Texas, with a June 19, 2024, performance completion date. Using customer is Federal Emergency Management Agency. Type of appropriation is fiscal 2019 through 2024 defense working capital funds. The contracting activity is the Defense Logistics Agency Troop Support, Philadelphia, Pennsylvania. Welch Allyn Inc., Skaneateles Falls, New York, has been awarded a maximum $100,000,000 firm‐fixed‐price, indefinite‐delivery/indefinite‐quantity contract for patient monitoring systems, accessories and training. This is a five-year base contract with one five‐year option period. This was a competitive acquisition with 36 responses received. Location of performance is New York, with a June 24, 2024, performance completion date. Using customers are Army, Navy, Air Force, Marine Corps and federal civilian agencies. Type of appropriation is fiscal 2019 through 2024 defense working capital funds. The contracting activity is the Defense Logistics Agency Troop Support, Philadelphia, Pennsylvania (SPE2D1‐19‐D‐0019). Hamilton Sundstrand, Windsor Locks, Connecticut, is to be awarded a $16,532,250 firm-fixed price contract for helicopter flight control computers. This was a sole-source acquisition using justification 10 U.S. Code 2304 (c)(1), as stated in Federal Acquisition Regulation 6.302-1. Location of performance is Arizona. Using military service is the Army. Type of appropriation is fiscal 2019 Army working capital funds. The contracting activity is Defense Logistics Agency Aviation, Redstone Arsenal, Alabama (SPRPA1-13-G-001X/SPRRA1-19-F-0329). NAVY L3 Technologies Inc., Northampton, Massachusetts, is awarded a $73,743,347 indefinite-delivery/indefinite-quantity contract containing cost-plus-fixed-fee, cost-reimbursement and firm-fixed-price provisions. This contract provides for depot-level repair, upgrade and overhaul services for submarine photonics mast programs. Work will be performed in Northampton, Massachusetts (98%), and at various places in the U.S. below one percent (2%) and is expected to be completed by June 2025. Fiscal 2019 other procurement (Navy) funding in the amount of $2,146,169 will be obligated on the first delivery order at time of award and will not expire at the end of the current fiscal year. This contract was not competitively procured, in accordance with 10 U.S. Code 2304(c)(1) - only one source and no other supplies or services will satisfy agency requirements. The Naval Undersea Warfare Center Division Newport, Newport, Rhode Island, is the contracting activity (N66604-19-D-G900). Katmai Integrated Solutions LLC,* Anchorage, Alaska, is awarded a contract ceiling $21,625,000 indefinite-delivery/indefinite-quantity contract with a three year ordering period to provide subject matter support services for Immersive Training Range Support (ITRS) . Work will be performed at Camp Lejeune, North Carolina (40%), Camp Pendleton, California (40%), and Marine Corps Base, Hawaii (20%), and work is expected to be completed June 24, 2022. Fiscal 2019 operations and maintenance (Marine Corps) funds in the amount of $4,877,737 will be obligated on the first task order immediately following contract award and funds will expire the end of the current fiscal year. This contract was not competitively procured. The contract was prepared in accordance with Federal Acquisition Regulation 6.302-5 and 15 U.S. Code 637. The Marine Corps Systems Command, Quantico, Virginia, is the contract activity (M67854-19-D-7835). Advanced Solutions Inc., Washington, District of Columbia, was awarded $16,863,635 for firm-fixed-price modification to a previously awarded task order N00039-18-F-0069 issued against Blanket Purchase Agreement N00104-08-A-ZF42 and the underlying a multiple award schedule in support of Navy Enterprise Resource Planning. This modification exercises an option for cloud and integration support services. Work will be performed in Loudon, Virginia (50%) and Mechanicsburg, Pennsylvania (50%) and is expected to be completed in June 2020. Fiscal 2019 operation and maintenance (Navy) funds in the amount of $16,863,635 will be obligated at the time of the award, which will expire at the end of the current fiscal year. The Naval Information Warfare Systems Command, San Diego, California, is the contracting activity. (Awarded June 20, 2019) AIR FORCE Concentric Security LLC, Sykesville, Maryland (FA8003-19-D-A001); Nasatka Barrier Inc., Clinton, Maryland, (FA8003-19-D-A002); Cherokee Nation Security & Defense LLC., Tulsa, Oklahoma, (FA8003-19-D-A003); and Perimeter Security Partners LLC., Nashville, Tennessee (FA8003-19-D-A004) have been awarded a $45,000,000 firm-fixed-price, multiple award, indefinite-delivery/indefinite-quantity contract for vehicle barriers maintenance and repair services. This contract provides for all personnel, labor, equipment, supplies, tools, materials, supervision, travel, periodic inspection, minor repair, and other items and services necessary to provide maintenance for Air Force vehicle barrier systems. Work will be performed at all Contiguous United States (CONUS) (excluding Alaska and Hawaii) active duty Air Force installations and is expected to be completed by June 23, 2024. These awards are the result of a competitive acquisition and four offers were received. Fiscal 2019 operations and maintenance funds in the amount of $4,000 ($1,000 per awardee) are being obligated at the time of award. The Air Force Installation Contracting Center, Wright-Patterson Air Force Base, Ohio is the contracting activity. Weldin Construction LLC, Palmer, Alaska, has been awarded a $35,000,000 ceiling increase modification (P00004) to previously awarded contract FA4861-17-D-A200 for simplified acquisition of base engineering requirements. This modification will increase the contract value from $35,000,000 to $70,000,000. Work will be performed at Nellis Air Force Base, Nevada and Creech Air Force Base, Nevada, and is expected to be completed by Dec. 2021. No funds are being obligated at the time of award. The 99th Contracting Squadron, Nellis Air Force Base, Nevada, is the contracting activity. DEFENSE ADVANCED RESEARCH PROJECTS AGENCY Leidos Inc., Reston, Virginia, was awarded a modification to exercise an option totaling $8,825,457 to previously awarded contract HR0011-18-C-0127 for a Defense Advanced Research Projects Agency (DARPA) research project. The modification brings the total cumulative face value of the contract to $13,204,195. Work will be performed in Arlington, Virginia; San Diego, California; and King of Prussia, Pennsylvania, with an expected completion date of September 2020. Fiscal 2019 research, development, test and evaluation funds in the amount of $4,600,000 are being obligated at time of award. The Defense Advanced Research Projects Agency, Arlington, Virginia, is the contracting activity. *Small business https://dod.defense.gov/News/Contracts/Contract-View/Article/1885753/source/GovDelivery/

By Christian Paas-Lang Canada's 15 new warships will cost almost $70 billion over the next quarter-century, according to Parliament's budget watchdog, and the cost could change further depending on the final design of the ships and when they actually get built. The estimate, released in a report by the parliamentary budget office Friday, is up substantially from a Canadian government estimate in 2017 that pegged the price of the project at between $56 billion and $60 billion. The 2017 estimate was itself a revision of the project's original $26-billion price tag. Also in 2017, the PBO estimated the total cost of the ships to be $61.8 billion, but its report released Friday updates that to reflect the design of the ships — frigates known as “Type 26” — which wasn't known at the time. It also accounts for delays in the project. The Canadian government will now pay out $69.8 billion over 26 years, the PBO estimates. In a statement released shortly after the PBO report, the Department of National Defence said it remained “confident” in its 2017 estimate, and that the “vast majority” of the difference between the estimates came from the PBO's choice to include taxes in its projections. Taking away taxes brings the two estimates to within 10 per cent of each other, the DND said. But the department conceded that any small difference means hundreds of millions of dollars in costs for taxpayers. The PBO report says the difference in the estimates is due to a later start date for construction and a heavier ship design. The report assumes ships will start being built by the 2023-2024 fiscal year, three years later than its 2017 projection. As the timeline extends into the future, costs increase due to inflation. The PBO originally projected a displacement, or weight, of 5,400 tonnes for each ship but the Type 26 design is a heftier 6,790 tonnes per ship, an increase of more than 25 per cent. The report also includes an analysis of what effect further significant delays would have on the project. For a one-year delay, the PBO estimates, an extra $2.2 billion will be added to the project cost, and a two-year delay would cost the government $4.5 billion. In an interview Friday, the top bureaucrat in charge of procurement at the DND expressed skepticism that the heavier ships will result in as much increased cost as the PBO suggests, but he did say the potential for delays was something he is “watching more carefully.” “The labour piece is always where uncertainty can remain,” said Pat Finn, the department's associate deputy minister for material, noting labour can make up around 40 per cent of the cost of a ship. Finn said the DND is in the “same place” as the PBO on the cost of “slippage” — delays in the project — but that he is confident the structure of the National Shipbuilding Strategy will mean the project could benefit from a skilled workforce and ongoing expertise. The purchase of additional Arctic patrol ships, announced last month, means there will not be a lapse in efficiency at Irving's Halifax shipyard, which is building the warships, Finn said. He set a goal for start of construction earlier than the PBO assumes in its report. “We would say between mid-2022 and mid-2023, we're in-contract and cutting steel,” Finn said. Potential delays would certainly increase costs, and it would be “absolutely no shock if there was additional delays,” said Dave Perry, a procurement expert with the Canadian Global Affairs Institute. “To this point in time, the government has not been able to meet any of the timelines that have been put forward publicly,” he added. Still, the closer you get to construction, Perry said, the less uncertainty there should be about costs and the potential for further delay. The last thing that might change the final cost of the ships is the specifics of what components are chosen to fill out the design — which radar equipment, for example, Perry said. The DND is deciding on those components as it reconciles the requirements of the ships with costs. “You could potentially get a few-percentage-point swing” in price in either direction based on those choices, said Perry. “But if you're talking about several tens of billions of dollars, a few-percentage-points swing is real money.” https://globalnews.ca/news/5418997/canada-warships-cost/