Back to news

September 3, 2019 | International, Aerospace, C4ISR

Virtual reality pilot training program graduates latest class, including Brits

By: Stephen Losey

Fourteen students graduated Thursday from the Air Force's Pilot Training Next program, which includes using virtual reality systems to teach aspiring aviators to fly.

The latest class, which is the second iteration of Pilot Training Next and began this January, included some students from the U.S. Navy and the United Kingdom's Royal Air Force.

In a Thursday release, the Air Force said the graduates include two Air National Guardsmen who were selected to fly airframes including the F-35 Lightning II, the F-15E Strike Eagle, the F-16 Fighting Falcon, the C-17 Globemaster III, the B-2 Spirit, and others.

The two Navy graduates will fly the T-45A Goshawk, and the lone RAF graduate will fly the Typhoon.

“It definitely made the process more difficult having to push through burgeoning technology, but I am glad that I could be a part of the development process towards a more efficient and thorough version of learning for the future,” said 2nd Lt. Aaron Sless, a distinguished graduate of the program and winner of the Warrior Award, who is slated to become an F-35 pilot. “I am excited to see how PTN progresses technology and learning in the future and how it will be applied to undergraduate pilot training, and the Air Force at large.”

Air Force Recruiting Service Commander Brig. Gen. Jeannie Leavitt, who made history as the Air Force's first female fighter pilot, said at the graduation that the students represent the future of aviation and are on the “leading edge” of a new way to learn to fly.

“The fact is, we are looking at a whole new way of learning in a non-standard way from the Air Force perspective,” Leavitt said. “Remember, dream big, be bold and learn to take calculated risk.”

Pilot Training Next uses advanced biometrics, artificial intelligence and virtual reality systems to try to find ways to streamline how the Air Force trains new pilots. The program uses off-the-shelf VIVE Pro VR headsets and stations with sticks, throttles and other equipment to simulate virtual cockpit and practice maneuvers. The AI tracks students' biometrics, including stress, to tailor the simulation environment and train them most efficiently. The program also includes time flying actual aircraft.

The Air Force's first PTN class began in April 2018 in the Armed Forces Reserve Center in Austin, Texas. In May, the program moved to Joint Base San Antonio-Randolph in Texas.

The third class is scheduled to begin in January, the Air Force said.

The Air Force eventually wants similar VR training programs to more efficiently teach airmen to be maintainers or go through other technical training programs.

https://www.airforcetimes.com/news/your-air-force/2019/08/30/virtual-reality-pilot-training-program-graduates-latest-class-including-brits

On the same subject

  • Army wades back into effort to replace Bradley vehicle

    February 10, 2020 | International, Land

    Army wades back into effort to replace Bradley vehicle

    By: Jen Judson WASHINGTON — The Army is wading back into an effort to replace the Bradley Infantry Fighting Vehicle with the release of a market survey on Feb. 7, tapping industry for ideas on what a future Optionally Manned Fighting Vehicle (OMFV) might look like. After receiving only one bid in its previous attempt to develop and procure the OMFV and subsequently deciding to cancel the existing solicitation last month, the Army has a new plan to move forward that seeks to avoid some of the pitfalls encountered during its first try. The market survey itself asks companies to weigh in on what affected their decisions to participate, or not, in the previous OMFV competitive effort and how the Army might better engage with industry this time around. Instead of a laundry list of requirements that when paired together became unachievable — especially when delivered over an ambitious fielding goal of 2026 — the Army will be giving industry roughly nine characteristics, each of which will be laid out simply enough to take up just a page-and-a-half including a signature block, Army Futures Command Commander Gen. Mike Murray told a group of reporters at the Pentagon shortly before the release of the survey. The Army had previously laid out requirements such as the need to transport two vehicles in a C-17, for example, which turned out to be a difficult ask to industry within the timeline the Army was pushing. While the list of characteristics did not post with the market survey, Murray said the vehicle will have to protect soldiers, keep pace in a combined arms formation, be able to upgrade over time through open architecture, and be capable of growth without significant weight increases. It also must be lethal, and able to traverse bridges and main supply routes. Additionally, the vehicle should be transportable by rail, air or sea, and crew members have to fit in the back. An on-board training system would also be nice, Murray said, adding that the Army wants to take a look at different options for power and energy sources. Murray also stressed the document outlining the characteristics would change as the Army learned more down the road. Not required of industry will be physical bid samples as it previously requested. Only General Dynamics Land Systems was able to deliver a bid sample, but it did not meet all the requirements the service had laid out. Defense News first broke the news that a Raytheon-Rheinmetall team was unable to get its Lynx combat vehicle to the United States from Germany in time and was subsequently disqualified and that BAE Systems, the incumbent, wouldn't participate in the competition either. The ability to see what was possible from a technology and integration standpoint “was important to us and so I wouldn't say it was a mistake," Murray said of the decision to require a bid. “Did it lead to some problems we had? Maybe. But I would not characterize that as a mistake.” The Army, instead, will take a more measured approach, holding conversations with industry, requesting white papers and then choosing five prime contractor teams to design rough digital prototypes, according to the Army's acquisition chief, Dr. Bruce Jette. The Army plans to involve “soldier touch points” at every stage of the process and give soldiers a chance to heavily evaluate designs along the way, he said. Murray took pains to emphasize that soldiers would be involved in the design process, calling it “soldier-centered design,” which takes a page from other modernization efforts like the Integrated Visual Augmentation System (IVAS) program. And before ever bending any metal, the service will downselect to a group of three contractors that will provide more refined and detailed digital prototypes akin to a critical design review stage. Then the Army will choose two prime contractors to build prototypes that will be heavily tested and demonstrated in order to potentially choose a winner that would move into a manufacturing contract, Jette explained. While the timeline was ambitious in the previous effort and Army modernization goals dictated that it had to stick to schedule over all else, a schedule or even a benchmark for the first unit equipped isn't defined this time around. Murray said the Army will look to early conversations with industry to inform possible schedules based on what is feasible rather than setting an “arbitrary date” right up front. The Army is also planning to look at up to five vendors for major subsystems or components, Jette said. He also noted the service wants to “encourage companies to bring forth technology” that may not want to be a prime contractor, but have capabilities like automated loaders and fire control systems as well as in-cab wireless connectivity. “The barrier to entry is much lower for their investment,” he said. “By going to a digital design, as most do anyway, it makes it much easier for a company to participate as an [Original Equipment Manufacturer] OEM.” https://www.defensenews.com/land/2020/02/07/army-wades-back-into-effort-to-replace-bradley-vehicle/

  • Mexico's booming aerospace industry not sweating NAFTA

    September 5, 2017 | International, Aerospace

    Mexico's booming aerospace industry not sweating NAFTA

    Arturo Avila toiled and suffered to build his Mexican start-up into a thriving aerospace company -- and the last thing he's going to do now is lose sleep over Donald Trump's NAFTA threats. https://au.news.yahoo.com/world/a/36967051/mexicos-booming-aerospace-industry-not-sweating-nafta/

  • Exportations françaises d’armement : net rebond attendu en 2021

    June 3, 2021 | International, Aerospace, Naval, Land, C4ISR, Security

    Exportations françaises d’armement : net rebond attendu en 2021

    Troisième pays exportateur d'armement en 2020, derrière les États-Unis et la Russie, avec 4,9 milliards d'euros de ventes, la France s'attend à un net rebond en 2021, notamment suite à la signature de contrats qui ont été discutés mais n'ont pas pu aboutir en raison de la crise sanitaire, et surtout à « l'entrée en vigueur des trois contrats de vente de l'avion de combat Rafale pour 7,7 milliards d'euros », comme l'a souligné Hervé Grandjean, porte-parole du ministère des Armées, qui a présenté, ce mercredi, le rapport sur les exportations d'armement en 2020 remis au Parlement. « Le contrat signé avec la Grèce est entré dans le carnet de commandes 2021. Notre objectif est une entrée en vigueur des contrats avec l'Égypte et la Croatie d'ici à fin 2021 », a-t-il ajouté. « Au total, l'Europe est la première destination de nos exportations avec 25% de la valeur, contre 17% en 2017. C'est la seconde fois que nous vendons autant en Europe, hors l'année 2019 (47%) marquée par des contrats exceptionnels», souligne Hervé Grandjean. Le Moyen-Orient a représenté 24% du total, l'Asie-Océanie 22%, et l'Afrique 16%. Le Figaro, La Tribune et L'Usine Nouvelle du 3 juin

All news