Space domain awareness, protection requires more space-based systems

On the same subject

• 

  June 12, 2018 | International, Naval

  Lockheed, Austal USA serve up new batch of LCS amid frigate competition

  The littoral combat ship program continues to push ships to the fleet as the program begins to wind down ahead of the Navy's planned transition to a future frigate. In Marinette, Wisconsin, Lockheed and Fincantieri's latest mono-hull LCS, the Sioux City, completed acceptance trials in Lake Michigan, according to May 31 announcement. That ship is preparing to commission in Annapolis, Maryland, in the Fall after some weather and mechanical delays pushed back trials. The Sioux City is the sixth mono-hull LCS. Austal USA in Mobile, Alabama, in May delivered its eighth trimaran LCS, the Tulsa, and the second LCS delivered by the yard this year. The first one, the Manchester, was commissioned May 26. Both yards are still churning on a backlog of LCS. The ships will be coming fast and furious over the next couple of years as Austal, Lockheed and Fincantieri all pursue strategies to secure the contract to build the Navy's future frigate, known as FFG(X). At Marinette, the yard has seven other ships in production as well as one in long-lead procurement. Austal is working on five other LCS and the last three expeditionary fast transport ships of the 12 ordered. Between the two shipyards, there are no fewer than three proposals for the FFG(X). Fincantieri is pushing hard to make FREMM the Navy's next frigate, which would likely be built at Marinette. You can read all about the FREMM below: Lockheed is also likely eyeing Marinette for its proposal for FFG(X), a variant of the Freedom mono-hull LCS, for which it is the prime contractor. Austal is likewise proposing a variant of its trimaran LCS and the stakes for that shipyard are especially high since it is coming to the end of both its programs. Lockheed and Fincantieri are anticipating an order of a Freedom LCS variant multi-mission surface combatant for Saudi Arabia's naval recapitalization. All three of the contractors are among five competing for the FFG(X) contract. Navantia and Huntington Ingalls are the other two. https://www.defensenews.com/naval/2018/06/11/lockheed-austal-usa-serve-up-new-batch-of-lcs-amid-frigate-competition/

• 

  December 9, 2024 | International, Land

  Portugal calls for joint EU funding for defence spending

• 

  February 28, 2020 | International, Land

  Rheinmetall partners with DST, CSIRO, QUT and RMIT to develop new sovereign automated military vehicle capability

  February 27, 2020 - Rheinmetall is pleased to announce the launch of its first Australian research and technology program. Under the Autonomous Combat Warrior (ACW) program, Rheinmetall's Australian, German and Canadian development teams will work alongside research teams from Defence Science and Technology (DST) group, the Commonwealth Scientific and Industrial Research Organisation (CSIRO), Queensland University of Technology (QUT) and the Royal Melbourne Institute of Technology (RMIT). The aim is to develop advanced sovereign robotics and automated vehicle technologies. This will create a local automated military vehicle capability. Rheinmetall Defence Australia Managing Director Gary Stewart said the program would lead the Australian development of next generation automated combat vehicle technologies for integration into the family of Rheinmetall vehicle platforms. “ACW's goal is to fundamentally change the way in which land vehicles support military operations by transforming a vehicle from tool to teammate to provide currently unachievable levels of soldier protection, support and tactical advantage,” Mr Stewart said. “This will see the Australian development of the next generation of land vehicle systems warfighting capability, with an emphasis on developing trusted automated systems which provide human-machine teaming and optional crewed control.” The program will focus on the automation of driving capabilities. Rheinmetall only develops systems that are strictly compliant with the rules of engagement of its customers. Rheinmetall does not develop, manufacture or market fully autonomous weapon systems. Rather, Rheinmetall is convinced that humans must retain the power of decision and therefore rejects fully autonomous weapon systems that deprive humans of the power to decide whether or not to use weapons against other humans. Rheinmetall's contribution to the program will take place across its Australian, Canadian and German businesses with the focus of research to take place at the company's Melbourne operations and its new Military Vehicle Centre of Excellence in Redbank, Queensland which is due for completion in the second half of 2020. Rheinmetall Defence Australia is working with the DST Group under a 5-year strategic R&D alliance agreement to work collaboratively to advance automated vehicle systems. The agreement builds on Rheinmetall's longstanding relationship with DST in the area of simulation and augmented reality. The partnership also includes R&D around novel concepts and technologies that support the new Boxer 8x8 Combat Reconnaissance Vehicle capability Rheinmetall is delivering to the Australian Defence Force under the $5.2 billion Land 400 Phase 2 program. Rheinmetall Canada has developed Mission Master vehicles that incorporate an eight-wheel drive, skid-steer, electric, unmanned platform operated in either robotic, semi or full autonomous driving modes. These vehicles can be fitted with various payload modules including cargo, protection, medical and surveillance variants. Rheinmetall Landsysteme Germany has over twenty years of experience in the automation of vehicles. Its system safety and system architecture competencies derive from more than ten research projects, and relevant technologies such as drive-by-wire have been developed to a uniquely high level of maturity. This underscores Rheinmetall's status as a leader in automation technologies. The Autonomous driving vehicle capability, or “A-kit”, currently integrated into the Mission Master provides the base software architecture for all future stages of the ACW research program and provides the autonomous capabilities including robotic vehicle control (robotic control or semi-autonomous); “follow me” control (semi-autonomous); simultaneous localisation and mapping); autonomous waypoint navigation (semi or full autonomous); and GPS allowed/denied navigation (semi or full autonomous). Rheinmetall is also upgrading two Wiesel 2 digital vehicles with drive-by-wire architecture and the Rheinmetall Canada autonomous driving A-Kit package. These vehicles, when upgraded with Australian advanced autonomous applied research under the ACW Program, will be used to demonstrate the vehicle-agnostic and integrated payload capabilities of Rheinmetall's Advanced A-Kit. ACW's research and development objectives are to: Develop game-changing autonomous technologies in Australia; Leverage Rheinmetall global research and development efforts and existing vehicle platforms and technologies, to fast track the development of autonomous technologies; Develop a platform agnostic Autonomous Kit (A-kit), suited for integration into a variety of road and off-road military vehicles; Partner with the Australian research community and local industry with deep technical expertise to solve complex development problems; Generate a strong return on investment to the Commonwealth, in the form of employment and sovereign robotics capability; and Work with Army to support its evaluation and strategy development for the use of autonomous vehicles. RHEINMETALL AG Corporate Sector Defence Press and Information Oliver Hoffmann Rheinmetall Platz 1 40476 Düsseldorf Germany Phone: +49 211 473-4748 Fax: +49 211 473-4157 View source version on Rheinmetall : https://www.rheinmetall-defence.com/en/rheinmetall_defence/public_relations/news/latest_news/index_23168.php