July 11, 2019 | Local, Aerospace
The Royal Canadian Air Force (RCAF) is asking for industry help to develop a road map for the modernization of its fighter aircraft training ranges.
Public Services and Procurement Canada on July 8 issued a request for proposals (RFP) for a plan that would capitalize on Live-Virtual-Constructive (LVC) training and experimental environments at the two primary air weapons ranges in Cold Lake, Alta., and Bagotville, Que., as well as other ranges in Gagetown, N.B., Wainwright and Suffield, Alta, and Valcartier, Que., and at the Canadian Forces Maritime Experimental and Test Range in Nanoose Bay, B.C.
The Cold Lake Air Weapons Range (CLAWR), in particular, is considered a strategic asset that is vital to RCAF individual and collective training, as well as integrated training with the Canadian Army, Canadian Special Operations Forces Command, and allies. It regularly hosts the multinational Maple Flag exercises.
But the ranges were last upgraded almost 20 years ago and no longer provide sufficient representation of current threats or the connectivity to work with advanced next-generation fighter jets. They have also become expensive to maintain.
“Obsolescence, threat replication, and other land use stakeholders challenge the CLAWR's current utility to training fighter forces, while its future training environment must enable rehearsing the integration of future capabilities against emerging peer adversaries,” explained Stephan Kummel, director general of Fighter Capability, told Skies in a statement.
“The RCAF requires airspace designed for advanced air platforms, target arrays suitable for modern weapons, modern training instrumentation, and low-level communications to monitor and control training, and a selective security classification system to permit challenging simultaneous training at different classification levels so participants can share data within their approved national caveats.”
The RFP noted that RCAF investments in various virtual constructive capabilities over the past decades “were delivered through discrete projects where interconnectivity with the spectrum of RCAF LVC capabilities was not a requirement.”
As part of the road map, the Air Force is asking industry to “consider” the current modelling and simulation environment, virtual proving grounds, and all current RCAF platform simulators — including an eventual remotely piloted air system — as well as air traffic control, air weapons, and air and space control simulators.
The aim is a report that “recommended way forward to modernize the ranges and integrate all RCAF LVC capabilities ... Ranges, simulators and virtual environments need to be developed in a manner that supports collective training, but solutions must also support collective and distributed research and experimentation. The proposed investment strategy for the LVC modernization program must enable a seamless transition of equipment and environments between training and force development activities,” according to the RFP.
The 12-month contract, which includes a one-year optional extension, is divided into three phases: initial scoping, design and lifecycle support. The initial scoping report is expected to identify shortfalls in “critical range infrastructure such as: threat replication, briefing and de-briefing capability and facilities, communication, Air Combat Maneuvering Instrumentation (ACMI), EM spectrum management, A/G target design, specialist support personnel and security.”
“This roadmap is the first step in a multi-stage process that will ensure the long-term viability of force generation efforts, training, testing and evaluation, and the execution of large-scale multinational exercises such as Maple Flag,” said Kummel.
https://www.skiesmag.com/news/rcaf-seeks-proposals-on-air-weapons-range-upgrades/
February 11, 2022 | Local, Aerospace, Naval, Land, C4ISR, Security
OTTAWA - New figures show the Department of National Defence failed to spend more than $1.2 billion of its allotted budget in the last fiscal year, th...
December 7, 2022 | Local, Naval
Dartmouth, Nova Scotia - Following an illustrious 59 years of service supporting ocean science work in Canada and around the world, the CCGS Hudson is taking its final voyage and is set for deconstruction and environmentally-responsible disposal. On November 28, 2022, after an open competitive process, Public Services and Procurement Canada, on behalf of the Canadian Coast Guard (CCG), awarded the contract for the vessel’s deconstruction to Antigonish-based marine contracting company R.J. MacIsaac Construction Ltd (RJMI). The cost for this environmentally-responsible disposal contract is $1.6 million. In the coming weeks, the Canadian Coast Guard will sign over the care and custody of the decommissioned vessel to RJMI. The vessel will then be towed from the Bedford Institute of Oceanography in Dartmouth, Nova Scotia to a temporary storage site in Halifax Harbour for a few months. In Spring 2023, RJMI will tow the vessel to their Sheet Harbour facility where the hazardous material remediation and disposal process will be performed. By Fall 2023, the vessel will be removed from water and the hull and superstructure will be disassembled. The overall project is expected to be completed by the end of Fall 2023. RJMI will ensure that any steel, stainless steel, aluminum, or other recyclable materials onboard the vessel are recycled while non-recyclable materials are disposed of in an environmentally-responsible manner, in compliance with federal, provincial, and municipal regulations. As well, the contractor will salvage and return the CCGS Hudson’s hull transducers and propellers to the CCG. Quotes “Today is a bittersweet day as the Canadian Coast Guard responsibly disposes of the CCGS Hudson, a trailblazing vessel that has served Canadians and Canadian scientists for nearly 60 years. The Canadian Coast Guard taking this step serves as a reminder to all vessel owners across the country to have a plan to dispose of their ships in an environmentally responsible way to protect our lands and oceans.” The Honourable Joyce Murray, Minister of Fisheries, Oceans and the Canadian Coast Guard "For over half a century, the CCGS Hudson has proudly served our country. As this vessel retires, I’m thrilled to see a local company in Sheet Harbour receive the contract to deconstruct the vessel which will create jobs in Sheet Harbour and support the local economy." The Honourable Sean Fraser, Minister of Immigration, Refugees and Citizenship “As we mark the final chapter of CCGS Hudson’s illustrious history, I’m reminded of all of the Canadian Coast Guard personnel that sailed on the ship and left their mark on Canadian ocean science. I am particularly proud that some of the CCGS Hudson’s history will be preserved as a reminder to celebrate the past as we navigate the future in oceanographic science missions.” Mario Pelletier, Commissioner of the Canadian Coast Guard Quick facts Prior to the handover of the ship to R.J. MacIsaac Construction Ltd., Canadian Coast Guard personnel removed a number of items including the ship’s bell, the wheel, chronometer, anchors, and photographs from the CCGS Hudson which are currently being safely stored. The historic items will be archived or donated to maritime museums, installed on the future Offshore Oceanographic Science Vessel currently under construction at Seaspan’s Vancouver Shipyard, installed on other CCG vessels where appropriate, or placed as historical decorative pieces at departmental sites. The CCGS Hudson was a key platform for Fisheries and Oceans Canada’s oceanographic science program. The yet to be named Offshore Oceanographic and Science Vessel, isn’t expected to be delivered until 2025. The Canadian Coast Guard continues to work closely with Fisheries and Oceans Canada to mitigate the impacts on science programming. The future Offshore Oceanographic and Science Vessel is being built as part of the Government of Canada’s National Shipbuilding Strategy (NSS). The Offshore Oceanographic Science Vessel (OOSV), the second class of Canadian Coast Guard vessels being built by Seaspan’s Vancouver Shipyards, is a critical step in the renewal of the Coast Guard Fleet. The OOSV will support the Government of Canada’s next 30 plus years of cutting edge scientific research that will help inform decisions about protecting our fisheries, oceans and coastal areas. https://www.canada.ca/en/canadian-coast-guard/news/2022/12/ccgs-hudson-to-be-responsibly-deconstructed.html
April 21, 2021 | Local, Aerospace, Naval, Land, C4ISR, Security
Defence contractors, perhaps one in particular, were served notice in Monday's budget that the Liberal government will penalize companies that try to do the country economic harm. The policy was a feature of a nasty trade dispute between Ottawa and U.S.-based Boeing over three years ago. Its resurrection comes as Boeing is one of the bidders for the replacement of the RCAF's fighters.