RCAF aircraft, CAF personnel respond to wildfires in NWT as state of emergency declared - Skies Mag

On the same subject

• 

  November 11, 2019 | Local, Naval

  Halifax Shipyard launches Canada’s second Arctic and Offshore Patrol Ship

  HALIFAX, Nova Scotia, Nov. 10, 2019 (GLOBE NEWSWIRE) -- The Royal Canadian Navy's second Arctic and Offshore Patrol Ship (AOPS), the future HMCS Margaret Brooke, was launched today, Nov. 10, 2019, at Halifax Shipyard. The launch of the second of six AOPS for the Royal Canadian Navy, marks a significant milestone for Canada's National Shipbuilding Strategy (NSS) and the revitalization of the Royal Canadian Navy's combatant fleet. The 103-metre future HMCS Margaret Brooke transitioned from Halifax Shipyard's land level facility to a submersible barge on Nov. 8, 2019 and launched in the Bedford Basin today. The ship is now pier side at Halifax Shipyard where work continues to prepare the ship for sea trials and handover to the Royal Canadian Navy late next year. The future HMCS Margaret Brooke joins Canada's lead AOPS, the future HMCS Harry DeWolf, pier side at Halifax Shipyard. The future HMCS Harry DeWolf is in the final stages of construction and is preparing for initial builder sea trials at the end of November. Inside Halifax Shipyard's facilities, the Royal Canadian Navy's third and fourth AOPS, the future HMCS Max Bernay and the future HMCS William Hall, are under construction. The first two major sections of the future HMCS Max Bernay are scheduled to be moved outside in spring 2020. Canada's NSS was created to replace the current surface fleets of the Royal Canadian Navy and the Canadian Coast Guard. Over the next few decades, Halifax Shipyard will build six AOPS for the Royal Canadian Navy, two AOPS for the Canadian Coast Guard, and 15 Canadian Surface Combatants for the Royal Canadian Navy. As a result of the NSS, Irving Shipbuilding has become one of Atlantic Canada's largest regional employers, with thousands of Canadians now working in skilled, well-paying jobs. Halifax Shipyard, long at the centre of Canadian shipbuilding, is now home to the most modern, innovative shipbuilding facilities, equipment, and processes in North America. Halifax Shipyard is also continuing its legacy as the Halifax-class In-Service Support Centre of Excellence, with HMCS Charlottetown currently in the graving dock for an extensive docking work period. Quote Kevin McCoy, President, Irving Shipbuilding “Congratulations to our more than 2,000 shipbuilders on today's successful launch of the future HMCS Margaret Brooke. It is exciting to have two Arctic and Offshore Patrol Ships in the water and closer to being in use by the Royal Canadian Navy's sailors.” Media Contact: Sean Lewis Director of Communications Irving Shipbuilding Inc. T: 902-484-4595 E: Lewis.Sean@IrvingShipbuilding.com https://www.globenewswire.com/news-release/2019/11/10/1944417/0/en/Halifax-Shipyard-launches-Canada-s-second-Arctic-and-Offshore-Patrol-Ship.html

• 

  April 30, 2020 | Local, Land

  Land Sector Opportunities

  In the coming months, OEMs who have been pre-qualified will be looking for a Canadian supplier in order to optimize their value proposition in order to obtain an important contract with the Canadian Government for the Logistics Vehicle Modernization (LVM) project and the Enhanced Recovery Capability (ERC) project. So there will be business opportunities for Quebec compagnies, especially for those having land vehicle, service support and armor capabilities. If you would like to know more about these opportunities, please contact Mathieu Poirier of Canada Economic Development for Quebec Regions at the following email address: mathieu.poirier@canada.ca For further information : Logistics Vehicle Modernization (LVM https://buyandsell.gc.ca/procurement-data/tender-notice/PW-BW-005-27293 Enhanced Recovery Capability (ERC) project https://buyandsell.gc.ca/procurement-data/tender-notice/PW-BL-316-27602

• 

  May 31, 2019 | Local, C4ISR

  CREAFORM HANDYSCAN 3D SCANNER MEETS BOEING’S REQUIREMENTS

  Metrology-grade 3D laser scanner can now be used to inspect dents and blends on all models of Boeing commercial airplanes Creaform, the worldwide leader in portable 3D measurement solutions and non-destructive testing (NDT) solutions, announced today that its HandySCAN 3D™ metrology-grade 3D laser scanner can now be used for recording physical attributes of aircraft dents and blends on all models of Boeing commercial airplanes. Boeing has released a service letter with guidance on the use of 3D scanners for measuring dents and blends on airplanes. The SmartDENT 3D™ solution and the flagship HandySCAN 3D scanner were used in the process of guiding Boeing's quality requirements for the service letter. “Creaform is proud to see leaders such as Boeing, turn to 3D scanning solutions for surface defect inspection. With SmartDENT 3D, our goal is to provide the most accurate damage assessment to our customers, so they can make informed and safe decisions, while getting their aircraft back flying with minimal down time,” said Jérôme Beaumont, Global NDT Business Manager at Creaform. Overview of SmartDENT 3D benefits: Speed: 80 times faster than the pit gauge technique. It is the fastest and most reliable aircraft surface damage inspection tool available on the market. Metrology-grade measurements for aircraft maintenance: The scanner is accurate to 0.025 mm (0.0009 in.) and has a resolution of up to 0.100 mm (0.0039 in.) with high repeatability and traceable certificate. Intuitive pass/fail assessments: With its intuitive design and real-time software visualization, Creaform's NDT solutions ensure short learning curves and minimal operator experience influence on the accuracy of results. Live visualization and portability: Weighting less than a kilo, the handheld scanner is the perfect tool for work in hangars or directly outdoors. Users can easily perform 3D surface inspection of any part of an aircraft on which they would use manual techniques—including on and under wings. In addition to complying with Boeing's service letter, Creaform HandySCAN 3D scanners are listed in the Airbus Technical Equipment Manual, which is referenced in its Structure Repair Manual. Quality engineers and MRO operators looking to improve their turnaround times and profitability can contact Creaform to find out more about its NDT solutions. https://www.creaform3d.com/en/news/creaform-handyscan-3d-scanner-meets-boeings-requirements