Back to news

September 20, 2018 | International, Naval

Navy divers to have automated logging from worn dive computers

By Bobby Cummings, Office of Naval Research,

ARLINGTON, Virginia (NNS) -- For U.S. Navy deep-sea divers, time is of the essence. While operating 100 feet down, with little to no natural light—often in frigid temperatures and limited oxygen—time is everything.

But for divers, time remains a precious commodity on the surface as well.

For years, military divers have had to manually write and log information from dives while at sea into a system known as the Dive/Jump Reporting System (DJRS). Manual entries can be time-consuming and allow human error.

Enter the Office of Naval Research (ONR) Global TechSolutions program, a rapid-response science and technology program focused on solutions to problems submitted by Sailors and Marines.

ONR TechSolutions and industry partners have created a new tool called the Scuba Binary Dive Application (SBDA) 100 to digitally plan, record and report dive-profile information to DJRS. The application will accelerate the process of logging and uploading dive information, and will help eliminate potential data-entry mistakes.

The idea originated from Force Master Diver Scott Brodeur, Naval Expeditionary Combat Command.

“Scott has completed over a thousand dives during his career and he recognized the need to make the logging and reporting process more efficient for his peers,” said Jason Payne, TechSolutions acting program manager.

The SBDA 100 is a software application on a ruggedized tablet used to log, compute and accurately compile dive-profile data.

The data, collected from a wrist watch that divers wear during operations called a Navy Diver Computer, includes dive site conditions, equipment used by the divers, dive events, such as, when a diver left the surface or left the bottom of the ocean floor, and if the dive required decompression stops. SBDA 100 syncs this information and automatically uploads it to DJRS.

“For years, I witnessed how many hours it takes to manually log dives—watching the young guys that have to—at the end of a long 12 to 14-hour-day—come back and manually go through the dive logs and write everything down, and double check it and triple check it,” said Brodeur.

During a recent training exercise in the Gulf of Mexico, Brodeur, the Naval Experimental Dive Unit and other U.S. Navy divers stationed around the globe had the opportunity to test the technology for the first time.

“The designers gave me a crash course on how to operate the technology,” said Chief Navy Diver Marshall Goble, ship repair facility, Yokosuka, Japan. “I used the device as a primary but still used the ‘old school' way and wrote down the information as well. Both calculations came out 100 percent accurate. I found the tablet easier to use, and I have no doubt it's going to streamline efficiency.”

Throughout the process of the development of the SBDA 100, ONR TechSolutions has worked in conjunction with Space and Naval Warfare Systems Command (SPAWAR) Atlantic; industry partner Intelligent Automation Inc.; and Naval Surface Warfare Center (NSWC) Panama City, which is the home of the U.S. Naval Diving and Salvage Training Center. SPAWAR served as the principal investigator and NSWC Panama City provided technical support and hosted the training and demonstration of the SBDA 100 at sea.

“The technology has tested very well,” Brodeur said. “It's a testament to the value of the ONR TechSolutions program and everyone who worked on this project. Witnessing this idea come to fruition and have it be built, demonstrated, designed and ready for use is pretty exciting.”

Watch a video of the demonstration.

Bobby Cummings is a contractor for ONR Corporate Strategic Communications.

Get more information about the Navy from US Navy facebook or twitter.

For more news from Office of Naval Research, visit www.navy.mil/local/onr/.

https://www.navy.mil/submit/display.asp?story_id=107125

On the same subject

  • Artillery Seeks Robot Ammo Haulers

    January 29, 2020 | International, Land

    Artillery Seeks Robot Ammo Haulers

    Six companies got $150,000 Field Artillery Autonomous Resupply contracts to study everything from exoskeletons that strengthen human ammo handlers to robots that might replace them. UPDATED to clarify contract details WASHINGTON: After 100 years of hauling 100-pound howitzer shells by hand, Army gunners are about to get some high-tech help. Last week, representatives from six small and mid-size tech companies trudged through the mud with soldiers at Fort Bliss, Tex., so they could watch close-up as troops moved 155 mm shells from pallets to their M109 Paladins. The six firms are under 12-week, $150,000 contracts to refine their ideas to augment or replace human muscle at every stage of the loading process, part of the Field Artillery Autonomous Resupply (FAAR) initiative run by Austin-based Army Futures Command. “For every projectile that goes down range, that projectile is picked up no less than five different times by a soldier and moved manually – and each one of those projectiles is 100 pounds,” Maj. Chris Isch told the Army's in-house news service. “We are looking for ways to automate that as much as possible.” Robotic logistics, from self-driving supply trucks to AI predicting engine breakdowns, lacks the ominous glamour of so-called killer robots. But the sheer complexity of identifying friend or foe amidst the chaos of combat, and deep-rooted Pentagon policy on human control of lethal force, mean that autonomous weapons will take much longer to develop than autonomous supply and support systems, some of which are already in field-tests. That said, Field Artillery Autonomous Resupply would definitely mark the Army more deadly. Artillery historically kills more troops than any other branch, and after years of letting Russia pull ahead in range and volume of fire, the Army is urgently upgrading its guns. The service's No. 1 modernization priority is what it calls Long-Range Precision Fires, and while hypersonics and post-INF Treaty missiles have dominated the headlines, the LRPF portfolio also includes conventional howitzers. The Army had already begun upgrading the hull and automotive systems of its venerable M109 armored howitzer vehicle under its Paladin Integrated Management (PIM) program. Now it's looking to upgrade the gun and turret under what's called Extended Range Cannon Artillery. A New Beast To Feed Between a longer barrel, precision guidance and new rocket-boosted shells, ERCA has already doubled the Paladin's range, from 30 km (19 miles) to 62 km (39 miles) in test-shots at Yuma Proving Ground. The goal is to double it again, to over 120 km (75 miles). ERCA also plans to add an autoloader mechanism to feed the gun, instead of humans manhandling shells into the breech. That should increase the rate of fire from four shells a minute to 10. Assuming standard high-explosive rounds, that means the ERCA gun can go through 950 pounds of ammo in 60 seconds and a ton in just over two minutes. How do you feed such a beast? Currently, ammo is shipped in crates and pallets to (relatively) safe supply dumps in the rear, where troops load the individual shells into a purpose-built armored vehicle for transport to the front. That M992 ammo hauler has an extendable conveyer belt to transfer shells directly into the howitzer vehicle, but the belt doesn't always work that well in the field. Besides, the ammo hauler holds 95 rounds of high explosive and propellant, which would blow up horrifically if hit, so a standard tactic is to park the ammo transport under cover, well away from the guns, and have soldiers schlep the shells. The Army's multidisciplinary Cross Functional Team for Long-Range Precision Fires, already working on multiple missiles at once, couldn't develop the ERCA gun and a new loading system at the same time, an officer explained at an AUSA robotics conference last fall. So the team turned to a sister organization within Army Futures Command, the Army Applications Lab, whose in-house Army Capabilities Accelerator reaches out beyond traditional defense contractors to universities, startups, and smaller firms, especially ones which have little experience working with the military. Five Functions, Six Firms, 12 Weeks The Applications Lab came up with the Field Artillery Autonomous Resupply concept and sought proposals to revolutionize every step of the process. An online solicitation lists five key functions: Robotic ammo handling and transport for the supply depot to move shells from crates & pallets to the ammo vehicle, or even carry it directly to the gun; Small unmanned ground vehicles or even drones to drive or fly a few shells at a time – at least 150 pounds payload, i.e. one shell plus packaging — from the ammo vehicle to a gun at least a kilometer away; Automated ammo handling for inside the M109 howitzer itself, not only auto-loading the shell into the breech, but also setting charges, adjusting propellant loads for range, and more; Exoskeletons, both powered and passive, to help soldiers handle 100-plus-pound objects without fatigue – the main limiting factor on sustained fire – or injury; and Command & Control systems to coordinate munitions delivery when GPS and radio are being jammed, including self-directing robot swarms. The response was vigorous: 83 submissions from 43 states and multiple foreign countries, which the Army weeded down to the six firms that went out to Fort Bliss last week. Each got a $150,000 contract to spend 12 weeks gathering feedback and refining their designs, with a final brief to the Army in Austin on April 1st. (UPDATE: Technically, the six firms are all subcontractors to Alion Science and Technology, which is administering the program for the Army). The Army will then decide which, if any, should advance further towards actual production. The six companies in the current phase? Actuate (formerly Aegis) develops computer vision software that analyzes surveillance feeds in real time to detect intruders and firearms. They're based in New York City, hardly the usual breeding ground for defense contractors. Apptronik builds exoskeletons and “human-centered robotics” designed to work with people. It's a four-year-old spin-off of the University of Texas at Austin. The Army picked Austin to be Futures Command's home town precisely because it's a hub of high-tech innovation with few existing ties to the military. Carnegie Robotics in Pittsburg is a decade-old spin-off of Carnegie Mellon University's National Robotics Engineering Center. CMU has a strong relationship with the Army and is now host to the Army AI Task Force. Neya Systems, also in the Pittsburgh area, develops aerial drones and off-road robots. It's a division of employee-owned defense contractor Applied Research Associates. Hivemapper is a Silicon Valley firm that turns surveillance video – including from drones – into digital maps, automatically updated by change-detection algorithms, for both the private sector and the Pentagon. Pratt & Miller Engineering, based in Detroit and South Carolina, and most famous for its work on race cars, whose seven-ton EMAV robot just won a field-testing contract for the Army's experimental Robotic Combat Vehicle – Light. Now, the RCV is still experimental, and Pratt & Miller's win hardly guarantees a production contract, it makes sense for them to offer a variant of the same robot for the artillery resupply program. It would definitely be simpler and cheaper for Army logisticians to use the same robotic chassis for both armed vehicles and ammo haulers. UPDATE “It's about creating direct, candid engagement between commercial solvers and Army problem owners to open the aperture on the realm of the possible,” said Porter Orr, production innovation lead at the Army Applications Lab, in a statement to Breaking Defense. “The capability presentations ...on April 1st...will be used to help shape thinking and inform future requirements, at a minimum.” “While it's possible that a single, ‘perfect' piece of hardware could come from the FAAR cohort, that's not the marker of success,” Orr continued. “Rather, it's about giving Army stakeholders better access and insight into commercial solutions with a low, upfront investment, while also creating channels that make it easier for non-traditionals to work with the Army. The FAAR cohort is the first to launch as part of this new model, but the intention is that it will not be the last.” Corrected 10pm to remove references to the Small Business Innovation Research (SBIR) process: While the Field Artillery Autonomous Resupply (FAAR) initiative is also exploring the use of the SBIR process, the contracts discussed in this article were awarded under a different vehicle. https://breakingdefense.com/2020/01/artillery-seeks-robot-ammo-haulers

  • Analysis: Japan rushes to rearm with eye on 2027 - and China's Taiwan ambitions

    October 18, 2022 | International, Other Defence

    Analysis: Japan rushes to rearm with eye on 2027 - and China's Taiwan ambitions

    Between China's 20th Communist Party Congress, that began Sunday, and the next one in 2027, Japan will undertake its biggest arms buildup since World War Two in a race to deter Beijing from war in East Asia, according to Japanese government officials and security analysts.

  • Proposed House spending bill would add more F-35s

    June 4, 2024 | International, Aerospace

    Proposed House spending bill would add more F-35s

    The defense appropriations bill would take a different approach than the proposed NDAA, which would cut F-35 purchases.

All news