June 3, 2020 | International, Aerospace
June 2, 2020 | By John A. Tirpak
The Pentagon awarded Lockheed Martin a $26.7 million contract on June 1 to develop a structural modification for the F-35 strike fighter to improve its Suppression/Destruction of Enemy Air Defenses capability (SEAD/DEAD). The retrofit design will be applied to both U.S. and foreign F-35s in Lots 14 and 15, and will be completed by August 2022.
The contract, issued by Naval Air Systems Command on behalf of all F-35 users, says Lockheed will perform the engineering necessary to modify the aircraft to perform “full up” SEAD and DEAD. When the Air Force declared the F-35 operational in 2016, it described the F-35's SEAD/DEAD suite as able to perform the mission in a “limited” fashion. The need for a structural modification indicates the aircraft will be fitted with new munitions and/or sensors to carry out the role, which usually involves detecting, fixing, and attacking ground-based air defense threats, which can be mobile or stationary.
When the service declared initial operational capability for the F-35A, the aircraft was in the 3i configuration, which gave it capability to release satellite-guided bombs. With the 3F version, the F-35 gained capability for the GBU-39 Small Diameter Bomb and AGM-154 Stand-Off Weapon—both used for SEAD/DEAD. The Block 4 upgrade will enable the F-35 to carry the in-development Stand-in Attack Weapon (SiAW).
The Navy plans to field its AGM-88E Anti-Radiation Guided Missile, a successor to the HARM anti-radiation missile, and the Air Force is considering the weapon, as well. The ARRGM and HARM home in on the last known emissions of a surface-to-air missile radar at high speed; their presence and success in previous conflicts has dissuaded enemies from turning their radars on in some instances, hence “suppression.”
The F-35's ASQ-239 electronic warfare system can passively detect an enemy air defense system's emissions and geo-locate these targets in concert with the F-35's other systems. Air Force leaders have said the F-35, by virtue of its stealth, will become the main platform for the SEAD/DEAD mission in the coming decade. That role is now primarily performed by the F-16 with the HARM.
November 5, 2024 | International, Aerospace
The four E-7 Wedgetails that South Korea can now buy would allow it to modernize its airborne battle management capabilities and integrate with allies.
July 22, 2020 | International, Land, C4ISR
San Diego, CA, (July 20, 2020) - General Atomics Electromagnetic Systems (GA-EMS) announced today that it has been selected as a prime contractor for the U.S. Army Combat Capabilities Development Command (CCDC) Aviation and Missile Center's (AvMC) Digital Guided Missile (DGM) prototype program under the Aviation and Missile Technology Consortium (AMTC). GA-EMS will develop advanced missile conceptual designs in direct support of the Multi-Domain Operations (MDO) for the Army Modernization Campaign. “We are excited to be chosen to help frame the next generation of weapon systems for the U.S. Army,” stated Scott Forney, president of GA-EMS. “GA-EMS has more than a decade's worth of experience developing and advancing hypersonic weapons technologies for the joint service. We develop missile designs that have a digital model grounded with vetted modeling and simulation infrastructures. We are eager to leverage that expertise to develop competitive new ideas that better equip our men and women across a multi-domain battlespace.” GA-EMS will conduct required analysis and design to develop new missile system prototype concepts for the Long Range Precision Fires (LRPF), Next Generation Combat Vehicle (NGCV), Future Vertical Lift (FVL), and Air and Missile Defense (AMD) Cross Functional Teams (CFTs) and their high priority missions. The DGM prototype program intends to augment critical warfighter capabilities that have potential to provide increased lethality and overmatch by 2028. “GA-EMS has organic capabilities for the development of missile systems,” stated Nick Bucci, vice president of Missile Defense and Space Systems at GA-EMS. “Our key technical personnel with decades of experience in weapons design and manufacturing, along with our flight technologies and space and air systems engineering groups located in Huntsville, AL, bring the missile development knowledge and capability needed to support the U.S. Army's critical MDOs in the 2028 timeline.” The Aviation and Missile Technology Consortium (AMTC), Other Transactional Agreement (OTA) effort, will be executed for AvMC through Advanced Technology Incorporated (ATI). About General Atomics Electromagnetic Systems General Atomics Electromagnetic Systems (GA-EMS) Group is a global leader in the research, design, and manufacture of first-of-a-kind electromagnetic and electric power generation systems. GA-EMS' history of research, development, and technology innovation has led to an expanding portfolio of specialized products and integrated system solutions supporting aviation, space systems and satellites, missile defense, power and energy, and processing and monitoring applications for critical defense, industrial, and commercial customers worldwide. For further information contact: EMS-MediaRelations@ga.com Effort sponsored by the U.S. Government under Other Transaction number W9124P-19-9-0001 between AMTC and the Government. The U.S. Government is authorized to reproduce and distribute reprints for Governmental purposes notwithstanding any copyright notation thereon. The views and conclusions contained herein are those of the authors and should not be interpreted as necessarily representing the official policies or endorsements, either expressed or implied, of the U.S. Government. View source version on General Atomics Electromagnetic Systems: https://www.ga.com/general-atomics-selected-for-the-army-s-digital-guided-missile-program
August 2, 2022 | International, C4ISR
The DRS GES business will be combined with SES GS to create a scaled solutions provider serving the multi-orbit satellite communications needs of the US Government and supporting missions