October 28, 2022 | Local, Naval
Today, the Royal Canadian Navy (RCN) officially welcomed His Majesty's Canadian Ship (HMCS) Margaret Brooke into naval service with a commissioning ceremony.
This ceremony marks a significant achievement for both the RCN and the Canadian shipbuilding industry. The introduction of a second Arctic and Offshore Patrol Ship (AOPS) delivered under the National Shipbuilding Strategy, which sustains thousands of jobs annually in Canada, will enhance the RCN's ability to enforce sovereignty and meet the future defence challenges in Canada's offshore and Arctic waters.
A ship's commissioning ceremony is both a long-standing naval tradition, and, a special event for the ship's company – proud sailors who – have just returned from the ship's first deployment where they assisted communities in Atlantic Canada affected by Hurricane Fiona.
The commissioning of HMCS Margaret Brooke included a symbolic presentation of the commissioning pennant, as well as the symbolic presentation of the “keys to the ship” to the Commanding Officer, Commander Nicole Robichaud.
November 16, 2022 | Local, Aerospace, Naval, C4ISR
In a report tabled Tuesday, Karen Hogan says the agencies responsible for safety and security in the North don't have a clear picture of traffic in the region.
March 15, 2021 | Local, Aerospace, Naval, Land, C4ISR, Security
The Office of the Undersecretary of Defense for Research and Engineering's Global Capability Programs Office scans for vendors in foreign countries that have innovative technologies that speak to: The US Department of Defense's Technology Modernization Priorities, including: AI; Biotechnology; Autonomy; Cyber; Directed Energy; FNC3 (Fully Networked Command, Control, and Communications); Microelectronics; Quantum Science; Hypersonics; Space; 5G; Readiness and Joint Lethality in Contested Environments; Technologies satisfying urgent operational needs on a relevant fielding schedule; and/or Technologies that provide significant life cycle savings. Interested vendors may send their product data sheets and an FCT template to Colonel Stephen MacDonald, Defence Cooperation Attaché at the Embassy of Canada to the United States, at Stephen.MacDonald7@forces.gc.ca NLT 30 April 2021. A blank FCT template and an example of an FCT template are attached. Colonel MacDonald will compile the data sheets and FCT templates, and will forward them to the Global Capabilities Program Office. The Global Capabilities Program Office will then disseminate the vendor product data sheets and the FCT templates to the U.S. Armed Services and Agencies to gauge their interest. The Global Capabilities Program Office will inform Colonel MacDonald of the technologies that have peaked the interest of the U.S armed services and agencies. The vendors of these technologies will be asked to prepare a 20-minute presentation (including questions and answers) on their innovative technologies. We are aiming to schedule the presentations for the last week of May. The plan for the presentations will be announced under separate cover. Following the presentations, U.S. armed services and agencies will contact vendors if they continue to have an interest in their technologies. At that point, the discussions will take place directly between the U.S. armed services/agencies and vendors. An information session from the Global Capabilities Program Office and U.S. Armed Service representatives may be held near the end of April, and is pending confirmation. The intent of the information session will be to provide an overview of the FCT program/process and the needs of U.S. armed services and agencies. Details of the information session will be announced under separate correspondence. In the meantime, a presentation on the FCT program can be found here. Questions may be addressed to Colonel Stephen MacDonald, Defence Cooperation Attaché, at Stephen.MacDonald7@forces.gc.ca and Mr. Bobby Tate, Trade Commissioner, Defence and Security, at robert.tate@international.gc.ca.
June 7, 2019 | Local, Land
MONTRÉAL | L'entreprise montréalaise Effenco, qui se spécialise dans l'électrification des camions lourds, s'installe en France afin de partir à la conquête du marché européen. C'est un contrat de 3 millions $ signé au début de 2019 avec Derichebourg Environnement qui a fait croître la demande pour les solutions d'Effenco sur le vieux continent. Cette entreprise internationale a décidé d'opter pour la technologie hybride électrique Active Stop-Start d'Effenco afin d'équiper ses camions à benne affectés à de nouveaux contrats de collecte dans la Ville Lumière. «À la suite de l'entente avec Derichebourg, nous avons reçu de nombreuses expressions d'intérêt et conclu des ententes additionnelles avec des flottes et manufacturiers de camions en Norvège, en Italie, en Suisse ainsi qu'en Espagne», a indiqué David Arsenault, président et cofondateur d'Effenco, par communiqué. «Plusieurs centaines d'unités seront ainsi progressivement déployées dans différentes villes européennes au cours des deux prochaines années, a ajouté l'homme d'affaires. Nous sommes confiants que nos ventes à l'exportation atteindront d'ici trois ans quelque 100 millions $.» La technologie hybride électrique d'Effenco permet de réduire de 30 % les émissions de gaz à effet de serre des camions, qui sont également plus silencieux, un avantage en milieu densément peuplé. https://www.journaldequebec.com/2019/06/06/electrification-des-camions-lourds-effenco-debarque-a-paris-pour-conquerir-leurope