German air chief urges haste in fielding strike, utility drones

On the same subject

• 

  July 26, 2019 | Local, Aerospace

  Viking to put special missions aircraft on tour - updates on defence industry developments

  By DAVID PUGLIESE Viking Air Limited of Victoria, BC has announced its plans to hold a world demonstration tour for its Guardian 400 aircraft, the special missions variant of the Viking Series 400 Twin Otter. The world tour will include detailed briefings and demonstration flights in Europe, Africa, Middle East, India, South East Asia, Oceania, and North America, according to Esprit de Corps magazine. The company unveiled the special mission variant last month at the 2019 Paris International Airshow. Here are more details of what I wrote for Esprit de Corps: For the past six months, a production Series 400 Twin Otter has been undergoing modifications to transform into Viking's Guardian 400 demonstrator aircraft for the proposed world tour, the firm noted. It will feature a left-hand SCAR pod with Hensoldt Argos EO/IR imaging turret, multi-spectral HDTV camera, mega- pixel HD Thermal imager, laser range finder, multi-mode auto tracker, and Remote Image Bus (RIB) video feed for display on the cockpit MFD or crew workstation. The demonstrator will also feature a right-hand SCAR pod with Leonardo Osprey Radar System and Sentient Vidar Camera system. In addition to its mission sensor package, the Guardian 400 prototype will be equipped with an Airborne Technologies' tactical workstation with high-definition touchscreen monitors, data/voice/video recorder, Mission Management Unit (MMU), mission radio communications, intuitive hand controller for MCU & SLR camera targeting, CarteNav AIMS mission system software, Kestrel MTI targeting software, and IKHANA ergonomic mission seat for optimized crew comfort. The prototype will also be equipped with Viking conformal bubble windows, left and right wing-mounted hard points by IKHANA, Thunder Bay Aviation stretcher racks, and an aft lavatory for crew comfort. The tour is expected to start in September. It will end in May 2020 at CANSEC 2020 to be held in Ottawa. Nexter has been selected by the Canadian government to supply the Canadian Army with 88 multi-purpose robots. The deal includes the delivery of 79 NERVA-LG and nine NERVA-XX robots. It is worth $6 million. The medium-sized robot can be controlled from any standard PC, tablet or smartphone, according to the company. Nexter Systems is the prime contractor and will work with Nexter Robotics and ECA Robotics. Deltic Group of Oakville, Ontario will handle in-service support. Leonardo announced that it has signed a contract with QinetiQ to provide a number of PicoSAR Active Electronically Scanned Array radars for the Canadian military's new drones. The firm noted that the PicoSAR radar is ideally suited for installation aboard the Canadian Forces new system, which is based on the lightweight UMS Skeldar V-200 Unmanned Aerial System. The radar will provide all-weather ground mapping and surveillance capability for missions. Seaspan Shipyards has awarded BCS Automation Ltd. a contract for work on the Canadian government's new Offshore Oceanographic Science Vessel (OOSV). BCS is the most recent supplier to partner with Seaspan in its work on the OOSV program. BCS is a family owned Canadian small business located in Belleville, Ontario, Seaspan pointed out. The firm is supplying a state of the art ship control and monitoring system for the OOSV. The system is designed to provide ship personnel with all the basic alarms and status information they require in order to maintain the safe and efficient operation of the machinery, auxiliary systems and other relevant equipment. The system features built-in self-diagnostics, an intuitive, user-friendly interface and a fail-safe redundant network to enhance safety and reliability. BCS has previous experience working on NSS projects having been subcontracted by Hawboldt Industries to design and build the winch drive system for the Offshore Fisheries Science Vessels (OFSV). Two NATO member nations have opted to purchase Rheinmetall's ROSY rapid smoke/obscurant system for protecting their vehicle families. This versatile modular system thus continues to expand its presence in the global force protection market. The two orders are worth several million euros. Delivery of 126 systems to Spanish defence contractor URO Vehículos Especiales S.A. (UROVESA) has already begun. UROVESA will be installing these systems in 126 out of 139 VAMTAC protected patrol vehicles purchased by the Portuguese armed forces in July 2018, according to Rheinmetall. Delivery of the systems will be complete in March 2020. Pre-series delivery in response to another order begins in May 2019, this time from Belgium. Here, Rheinmetall is acting as subcontractor for the British company Jankel, which is supplying the Belgian Army with the Light Troop Transport Vehicle, or LTTV. All 199 of the vehicles are being prepared for integration of the system, in addition to the supply of control units and launchers for 167 vehicles. Series production commences in February 2020 and will be complete the same year. These two orders mean that ROSY will soon be in service in no fewer than eleven countries. ROSY provides protection from surprise attacks by creating a wall of smoke/obscurant that renders vehicles invisible to the enemy. Unlike conventional smoke/obscurant systems, it not only produces an instantaneous, extensive, multispectral interruption in the line of sight, but also generates a dynamic smoke screen that provides moving assets with long-lasting protection. Ocean Industries Inc. will build four tugs for the Royal Canadian Navy. The firm from Isle‑aux-Coudres, Quebec, was awarded the contract for $102 million under the National Shipbuilding Strategy. The new tugs will provide towing, firefighting and other critical support services to the Royal Canadian Navy. They will replace the navy's five civilian-crewed Glen-class large tugs and two Fire-class rescue boats. Two of the tugs will go to Canadian Forces Base Esquimalt in British Columbia. The other two will be delivered to CFB Halifax in Nova Scotia. The first two tugs are scheduled to be delivered in 2021. The last two tugs will be delivered in 2023. https://ottawacitizen.com/news/national/defence-watch/viking-to-put-special-missions-aircraft-on-tour-updates-on-defence-industry-developments

• 

  December 7, 2018 | Local, Aerospace, C4ISR

  Ottawa earmarks $20M to rejoin NATO airborne surveillance program

  Murray Brewster · CBC News The Liberal government has budgeted up to $20 million in this fiscal year to rejoin NATO's Airborne Early Warning and Control System (AWACS) program, reversing a Conservative-era budget cut in the name of alliance utility and solidarity. Defence Minister Harjit Sajjan and other senior officials recently appeared before a House of Commons committee to talk about the country's return to the long-standing alliance programme, which sees more than a dozen nations cost-share the operation of E3-A surveillance planes. New documents, released to CBC News under access to information law, show Canada has agreed to a partial return to the program through operations and support. It's a compromise decision that leaves the country's aerospace companies partly out in the cold — and one expert is questioning whether the reasons which led the former government to drop out of the program still exist. One of the major complaints voiced about the program behind closed doors in Stephen Harper's government had to do with NATO's reluctance to deploy the sophisticated surveillance aircraft on missions to Afghanistan and Iraq. The aircraft eventually were used for those missions, but not without considerable debate and what some Canadian officials saw as foot-dragging on NATO's part. 'A tough sell' Defence expert Dave Perry said that, going forward, the Liberals will have to justify this particular reinvestment more carefully. "If they don't actually use them in an operational context when it matters, then it's going to be a tough sell," he told CBC News. National Defence defends the decision to jump back into the program, saying in an email that "several things have changed, causing Canada to re-evaluate the relevancy" of its participation. A major factor is the introduction of the Liberal government's new defence policy, which emphasizes the need for better surveillance and reconnaissance. Canada had been part of the AWACS program for decades. When the Conservatives pulled the plug they cast the decision in economic terms, saying it had "little direct benefit." The planes were deployed in Europe and occasionally on other operations. The debate within the Harper government was over the logic of paying for a defence system that doesn't contribute directly to the defence of North America. "Accordingly, it is debatable whether it is appropriate for Canada to carry nearly 10 per cent of the programme, given that it is one of the two NATO members on the North American side of the Atlantic Ocean, and, as such, would benefit considerably less from AWACS than the 26 members on the European side," reads a March 22, 2016 internal government briefing note. NATO AWACS aircraft currently fly surveillance missions in support of reassurance measures in eastern Europe ordered after Russia's annexation of Crimea. The program is also providing "tailored assurance measures" for Turkey because of the crisis in Syria and is watching out for terrorist movement in the Mediterranean Sea. "I think time will tell, and it will depend on whether these aircraft are actually used," said Perry, an analyst at the Canadian Global Affairs Institute. "If they're not used, then it will be a struggle to justify Canadian participation, however good it is for wider burden-sharing within the alliance and support to allies." Business opportunities The internal briefing note shows the decision to quit in 2011 cost Canadian defence contractors the right to bid on hundreds of millions of dollars in work related to the modernization of observation planes, known for their distinctive radar domes. Rejoining the plan will allow Canadian companies a finite set of bidding opportunities, a National Defence spokeswoman said. "Canada did not regain access to AWACS-related industrial benefits for modernization and upgrade when it re-engaged with the program," said Jessica Lamirande in an email. "However, Canadian industry has regained eligibility to compete for contracts related to the operations and maintenance of the AWACS." The briefing shows Canada is, in some respects, being treated like a new member of the plan, which means Ottawa pays for operations and support of the aircraft "while the fleet modernization will continue to be the responsibility of the programme's current 16 members, who will retain all of the industrial benefits associated with the programme." Prior to the Liberal government's decision to return to the program, officials held out the hope that rejoining might "restore Canada's ability to bid on such contracts." Conservative defence critic James Bezan described the government's approach as a "half-measure" and said rejoining AWACS became necessary after the Ukrainian crisis. "They're not spending as much as we were and we're not getting the full benefits of industrial contracts," he said, noting the Commons defence committee pointed out that Canada was not getting everything it could out of NATO contract opportunities. "The Liberals are always late to the table and that's what we're seeing here." https://www.cbc.ca/news/politics/awac-nato-surveillance-ukraine-1.4931098

• 

  March 10, 2020 | Local, Aerospace, Naval, Land, C4ISR, Security

  Government doesn’t know when a defence procurement agency might be created

  In the last election campaign the Liberals promised to create a defence procurement agency as part of its efforts to improve purchasing of equipment for the Canadian Forces. No details were released at the time. In December, Prime Minister Justin Trudeau, in his mandate letter to Procurement Minister Anita Anand, outlined how she would lead an effort to bring “forward analyses and options for the creation of Defence Procurement Canada, to ensure that Canada's biggest and most complex National Defence and Canadian Coast Guard procurement projects are delivered on time and with greater transparency to Parliament.” Anand would do this with the support of the Minister of National Defence and the Minister of Fisheries, Oceans and the Canadian Coast Guard, according to her mandate letter. At the time Defence Minister Harjit Sajjan claimed much of the work was already underway. “A lot of work has already started on (Defence Procurement Canada) and the goal of this is to make sure that we get the procurement projects done as quickly as possible to make sure the Canadian Armed Forces has what they need,” Sajjan told iPolitics the day before his mandate letter was released. Strangely, when asked about that work, Sajjan's department pointed out that he wasn't specifically referring to the DND and that Anand's Public Services and Procurement Canada (PSPC) had the lead on the file. So, Defense Watch requested the timetable for this effort. Among the questions asked of Anand's department was when the new agency could potentially be expected to be stood up, will there be consultations done and whether there were any concepts already put forward for the agency that could be shared with the public? If this were such an important effort then of course the department would have an idea of at least a timeline on how things might unfold. Here is the answer provided by PSPC: “The Minister of Public Services and Procurement has been tasked to work with partner departments to bring forward analyses and options for the creation of Defence Procurement Canada. Public Services and Procurement Canada is leading this work with support from National Defence, Canadian Coast Guard, and Innovation Sciences and Economic Development Canada. This initiative is aimed at ensuring that Canada's biggest, most complex procurement projects are delivered on time and with greater transparency to Parliament. Work on this important initiative has just begun.” This answer provides little more than what was in the mandate letter. No details on what actual work was being contemplated or taking place was provided. There is no schedule or target date for even producing options and reporting back to government on those. In fact, this PSPC answer seems to undercut Sajjan's earlier claims that “a lot” of work had already started even before the mandate letters were released. Some in the defence industry don't expect much to come from the Liberal election promise of a single defence procurement agency. They point out their case is bolstered when the department leading the initiative doesn't know, or can't provide, even a timetable for such an initiative. The public, as well as industry, will have to wait and see whether Defence Procurement Canada ever becomes a reality. (Analysis) https://ottawacitizen.com/news/national/defence-watch/government-doesnt-know-when-a-defence-procurement-agency-will-be-created