August 24, 2023 | International, C4ISR, Security
US research interests closely tied to microelectronics industrial base
The Biden administration recently issued its research and development priorities for the fiscal 2025 budget.
July 8, 2019 | International, Aerospace, C4ISR
General Dynamics wins $217M contract for the Air Force’s network
By: Cal Pringle
General Dynamics Information Technology will provide the Air Force's 480th Intelligence, Surveillance and Reconnaissance Wing with network technology through a contract worth up to $217 million, according to a June 26 news release from the company
GDIT already works for the Air Force to provide network support for the service's Distributed Common Ground System), a contract the company has held for 20 years, the report said. That program is the Air Force's primary ISR planning, collection, processing and exploitation, analysis and dissemination weapon system. GDIT developed and implemented the initial design for the global network that supports the system, the report said.
As a result of the contract, the program's operations center will receive network administration, network engineering, information assurance, computer network defense, systems administration, computer network defense, systems administration, project management and C4ISR engineering, according to the report. The company will also work to help modernize the network, the release said.
On the same subject
-
-
March 27, 2020 | International, Aerospace
Gripen F Fighter Production Under way
March 26, 2020 - Saab has performed the first metal cut for the two-seater fighter aircraft Gripen F, marking an important milestone in the programme. Gripen F is under development for the Brazilian Air Force (FAB) and shares the same advanced design and features as Gripen E, but with seat, displays and controls for a second crew member. Gripen F has both a training mode for tuition of one crew member and a mode whereby the two crew members can share the workload with different display settings. The first part was manufactured recently at Saab's facilities in Linköping and is for the air duct section, just behind the cockpit of the aircraft. “This milestone is important for the Gripen project because it demonstrates that the development phase is proceeding properly. This signals the beginning of the production of the two-seater aircraft, Gripen F, which is much anticipated by the Brazilian Air Force,” says Colonel Renato Leite, head of the Monitoring and Control Group (GAC-Saab) at the Brazilian Air Force. The joint industrial programme on Gripen F is between Saab and the Brazilian partner companies Embraer, AEL Sistemas, Akaer and Atech. Currently, approximately 400 engineers are working with the development of Gripen F, mainly at Gripen Design and Development Network (GDDN) at the Embraer plant in Gavião Peixoto, São Paulo State, Brazil. Manufacturing will take place both in Sweden and in Brazil. “Very effective teamwork among many dedicated people, both in Sweden and in Brazil, paved the way for this milestone on this new version of Gripen. These kind of milestones are special moments due to their rarity and that feels great,” says Jonas Hjelm, head of Saab business area Aeronautics. Brazil has ordered 28 Gripen E fighters that will be delivered to Brazil starting from 2021 and eight Gripen F fighters, starting from 2023. Gripen F is also being offered by Saab to Finland for their fighter replacement programme. Please click here to watch a short video about the first metal cut. For further information, please contact: Saab Press Centre, +46 (0)734 180 018, presscentre@saabgroup.com www.saabgroup.com www.saabgroup.com/YouTube Follow us on twitter: @saab View source version on Saab: https://saabgroup.com/media/news-press/news/2020-03/gripen-f-fighter-production-under-way/
-
September 28, 2020 | International, Land, C4ISR, Security
Air Force awards laser-armed RADBO contract to Parsons
Aaron Mehta WASHINGTON — The U.S. Air Force has awarded a nearly $40 million contract to Parsons to produce ground vehicles that can clear mines or unexploded ordnance from airfields — using a laser. The package covers the procurement of 13 Recovery of Airbase Denied by Ordnance (RADBO) vehicles, as well as three spares. The system is made up of a Cougar MRAP, Parsons' three-kilowatt ZEUS laser weapon, and an arm assembly that can move debris or other objects out of the way. The idea behind the RADBO is to allow airmen to clear threats from current or future airfields – hardly the laser warfare capability sought by Pentagon planners for decades, but still a potentially important step, as it represents the first DoD ground-based laser system to be ordered into full production. The service awarded Parsons the sole-source contract on Sept. 23. Work will be performed in Huntsville, Ala., with a completion date of Sept. 2023. According to a 2018 video from the Air Force's Installation and Mission Support Center, the majority of development work on the RADBO design was done at the Army's Redstone Arsenal near Huntsville. Parsons claims the ZEUS design can hit targets “more than 300 meters away from the vehicle and is powerful enough to detonate small submunitions from cluster bombs, land mines, general purposed bombs and thick-cased artillery rounds,” per a company announcement. “This is Parsons innovation: delivering a game changing warfighting product,” Hector Cuevas, Parsons executive vice president of missile defense and C5ISR, said in a statement. “We're proud to partner with the Air Force in deploying this critical force protection and mission enabling technology that will greatly increase safe and effective explosive ordnance disposal operations.” https://www.c4isrnet.com/industry/2020/09/25/air-force-awards-laser-armed-radbo-contract-to-parsons/