October 14, 2020 | International, Land, C4ISR, Security
WASHINGTON — General Dynamics Land Systems debuted its new medium-class robotic combat vehicle — Tracked Robot 10-Ton, or TRX — at the Association of the U.S. Army's annual conference, which came together using AI-enhanced design and lightweight materials.
TRX is an independent research project that GDLS has been working for over year that builds on the technologies from its successful Small Multipurpose Equipment Transport (SMET) robotic vehicle program, a GDLS spokesperson told Defense News in an interview ahead of AUSA.
GDLS won the SMET competition this year after a recompete followed by a protest. GDLS also won the original contract.
The 10-ton vehicle has a light chassis that can carry a lot by using some advanced design technologies that the company has developed with partners as well as some unique manufacturing technologies and advanced materials, according to GDLS.
The platform is designed to meet a variety of critical missions such as direct and indirect fires, autonomous resupply, complex obstacle breaching, counter-unmanned aerial systems, electronic warfare and reconnaissance.
The robot can conduct semi-autonomous operations and is fast enough to keep up with high-speed maneuver formations like the Stryker Brigade Combat Team and the Armored BCT, GDLS said.
In GD's virtual exhibit booth at AUSA, the TRX represents an indirect fires configuration that showcases its partnership with drone-maker Aerovironment. The vehicle sports a large payload consisting of a variety of Switchblade loitering munitions.
In 2018, GDLS and Aerovironment announced its partnership at AUSA, revealing an armored reconnaissance vehicle for the Marine Corps competition with Switchblade and Shrike 2 unmanned aerial systems incorporated. The goal was to do something similar for the Army's Optionally Manned Fighting Vehicle (OMFV).
GD is also providing footage of its combat robot paired with a manned vehicle at the platoon- or company-level at its virtual booth.
While the Army did not select GDLS to build medium-class RCV prototypes to be used to determine the feasibility of integrating unmanned vehicles into ground combat operations, the company is prepared for when the Army moves forward with a competition to acquire those types of robots once it has defined requirements through experimentation over the next several years, according to company officials.
The Army is planning to make a decision on how to proceed with robots on the battlefield in 2023.
March 25, 2024 | International, Land
The Baltic Security Initiate saw an increase in funding, up to $228m, following the passage of US government funding legislation.
August 20, 2019 | International, Other Defence
By: Kelsey D. Atherton Snails and slugs are so commonplace that we overlook the weirdness of how they move, gliding on a thin film across all sorts of terrain and obstacles. Popular imagination focuses on how slow this movement is, the snail defined by its pace, but it is at least as remarkable that the same mechanism lets a snail climb walls and move along ceilings. The movement is novel enough that there is now a snail-inspired robot, sliding across surfaces on an adhesive membrane, powered by a laser. The snail robot, produced by a joint research team at the University of Warsaw Poland, together with colleagues from Xi'an Jiaotong-Liverpool University in Suzhou, China, created a centimeter-long robot powered by light. The research, published July in Macromolecular Rapid Communications, sheds new insight on how animals move in the wild, and on how small machines could be built to take advantage of that same motion. Why might military planners or designers be interested in snail-like movement? The ability to scale surfaces and cling to them alone is worth study and possibly future adaptation. There's also the simple efficiency of a creature that maneuvers on a single, durable foot. “Gastropods' adhesive locomotion has some unique properties: Using a thin layer of mucus, snails and slugs can navigate challenging environments, including glass, polytetrafluoroethylene (PTFE, Teflon), metal surfaces, sand, and (famously) razor blades, with only few super-hydrophobic coatings able to prevent them from crawling up a vertical surface,” write the authors. “The low complexity of a single continuous foot promises advantages in design and fabrication as well as resistance to adverse external conditions and wear, while constant contact with the surface provides a high margin of failure resistance (e.g., slip or detachment).” Snails can literally move along the edge of the spear unscathed. Surely, there's something in a robot that can do the same. The small snail robot looks like nothing so much as a discarded stick of gum, and is much smaller. At just a centimeter in length, this is not a platform capable of demonstrating much more than movement. The machine is made of Liquid Crystalline Elastomers, which can change shape when scanned by light. Combined with an artificial mucus later formed of glycerin, the robot is able to move, climb over surfaces, and even up a vertical wall, on a glass ceiling, and over obstacles, while it is powered by a laser. It does all of this at 1/50th the speed a snail would. This leaves the implications of such technology in a more distant future. Imagine a sensor that could crawl into position on the side of a building, and then stay there as combat roars around it. Or perhaps the application is as a robot adhesive, crawling charges into place at the remote direction of imperceptible light. Directing a robot into an unexpected position, and having it stay there with adhesive, could be a useful tool for future operations, and one that would be built upon research like this. The robot may be comically slow now. The pace of the technologies around it is not. https://www.c4isrnet.com/unmanned/robotics/2019/08/19/do-snail-robots-foreshadow-the-sticky-grenades-of-the-future/
June 3, 2020 | International, Aerospace, Naval, Land, C4ISR, Security
Pour compenser l'annulation d'Eurosatory 2020, la COGES, filiale du GICAT, va organiser des rendez-vous B2B sous forme de visio-conférences les 14 et 15 septembre prochains. Une première pour Eurosatory Contrainte d'annuler le salon Eurosatory 2020 pour cause de coronavirus, la Coges, filiale du Gicat, va organiser, les 14 et 15 septembre prochains, des rendez-vous B2B sous la forme de visio-conférences organisées par Proximum, un prestataire que Coges connaît déjà bien pour avoir organisé de tels rendez-vous dans ses propres salons, à Eurosatory notamment. A ce niveau, et dans l'armement, où la confidentialité incite à des rencontres directes plutôt qu'à des visios sans garantie totale d'interception, cette initiative est une première que forcément les organisateurs de salon vont regarder de près. Les PME et ETI, qui sont représentées dans les salons (qui représentent une énorme effort rapporté à leurs moyens) vont aussi devoir se positionner. Le Gicat à l'initiative Autre difficulté, des problèmes de compatibilité entre créneaux horaires risquent de se produire d'un continent à l'autre. Mais manifestement, le GICAT veut montrer à ses adhérents et à ses clients du salon qu'il est conscient de son rôle d'animation du secteur. D'ores et déjà, la campagne de remboursement d'Eurosatory 2020 est aussi engagée. L'annulation d'Eurosatory a forcément un gros impact pour les rentrées de la Coges, mais aussi pour un écosystème de fournisseurs qui travaillent autour (fabricants de stands, restauration, limousines, etc). Au cabinet de la ministre des Armées, Florence Parly, on mesure amplement l'impact sur les industriels de la filière terrestre. Au GICAT, on rappelle que 50 % du chiffre d'affaires des adhérents proviennent de l'exportation. Et qu'évidemment Eurosatory y concourt à son échelle. Des formules de salons à revoir ? Cette dématéralisation des salons professionnels est une tendance encore faible, mais réelle. Le coronavirus ou covid-19, et son caractère potentiellement récurrent oblige à se poser les bonnes questions pour les salons. D'autres organismes français vont forcément devoir se poser de telles questions, rassembler les rendez-vous, digitaliser. Ceci alors que les dépenses de communications connaissaient déjà de très fortes baisses tendancielles et/ou conjoncturelles avant-même le covid-19, comme chez Thales et Dassault Aviation. La multiplication des salons régionaux et thématiques fragilise aussi les gros salons, et assèche les trésoreries des exposants. Report de trois autres salons Le covid-19 impacte aussi clairement les trois autres salons professionnels détenus par la COGES : le salon Platinum à Monaco (sécurité privée et intérieure) prévu en mai et repoussé aux 2 et 3 février, Shield Africa à Abidjan est décalé de fin janvier aux 7-10 juin (également pour prendre en compte les élections). Enfin, ExpoDefensa à Bogota se tiendra du 29 novembre au 2 décembre. A ce stade, Euronaval 2020 est maintenu et le Sofins reste programmé pour 2021.