Back to news

October 7, 2024 | International, Aerospace

Entretien des F-35 | L3Harris veut faire de Mirabel une plaque tournante

L3Harris est en pourparlers avec les responsables du programme F-35 – dont le géant américain Lockheed Martin – pour faire de ses installations québécoises un centre nord-américain d’entretien pour cet avion de combat, a appris La Presse. Cela permettrait à son site de Mirabel d’être un incontournable pour l’armée américaine.

https://www.lapresse.ca/affaires/entreprises/2024-10-01/entretien-des-f-35/l3harris-veut-faire-de-mirabel-une-plaque-tournante.php

On the same subject

  • Soon to come to the Army: A high-power microwave to take out drone swarms

    August 8, 2019 | International, Land

    Soon to come to the Army: A high-power microwave to take out drone swarms

    By: Jen Judson HUNTSVILLE, Alabama — The Army is planning to field a high-power microwave capability to take out drone swarms as part of its Indirect Fires Protection Capability system in development. Through the Army's Rapid Capabilities and Critical Technologies Office (RCCTO) the service is looking to get the capability fielded to a unit by 2024 with a demonstration of the capability planned in 2022, the RCCTO director said August 7 at the Space and Missile Defense Symposium. RCCTO's job is to serve as a bridge between the science and technology community and the program executive offices, helping bring technology out of development and into soldiers' hands, first on a small scale and then a larger scale when passed off to program offices. The RCCTO right now is focused entirely on hypersonics and directed energy weapons. The IFPC system is being developed to counter rockets, artillery and mortar, as well as cruise missiles and unmanned aircraft systems, and the means to do that would be through a system featuring multiple types of missiles and also a laser capability to take out threats. Adding lasers to the mix means decreasing the number of expensive shots that would be taken against very inexpensive weapons. The Army is working to initially field a 100-kilowatt laser capability on a Family of Medium Tactical Vehicles as part of the IFPC program with a plan to demonstrate the capability in 2022 and then field prototypes to a unit. And the RCCTO is also looking at how to field even more powerful lasers for the IFPC mission between 250 and 300 kilowatts. But the service recognizes it might be easier to disrupt the flight of multiple drones at once rather than try to take out each one with a laser. “Lasers can do things but if you are a combatant commander, there is a toolbox of things you need to be successful on the battle space,” Thurgood said. “It's not just one tool but a series of tools.” So the program is teaming with the Air Force's effort to develop a high power microwave capability, he said. The Air Force will do the research and development work, but the Army will supply them with funding to build prototypes. The goal is to demonstrate a high-power microwave capability in 2022 and then field the capability to a small unit, much like what the RCCTO will do with the IFPC high-energy laser system. If the laser and high-power microwave capability both work well in small units, then they will transition to programs of record within the IFPC program, Thurgood said. Earlier this year, the Army awarded a contract to Dynetics, who is partnered with Lockheed Martin and Rolls Royce, to build the 100-kilowatt laser system for IFPC. The Army is also rapidly fielding a 50-kilowatt laser on a Stryker. Raytheon and Northrop Grumman are competing to build the system and, in FY21, the two lasers will be tested on difficult threats. The service will choose on to build prototypes that will be fielded to a Platoon in FY22. https://www.defensenews.com/digital-show-dailies/smd/2019/08/07/the-armys-indirect-fires-protection-system-is-getting-a-high-power-microwave/

  • GM Defense begins renovating N.C. facility to build ISVs

    December 18, 2020 | International, Land

    GM Defense begins renovating N.C. facility to build ISVs

    By Christen McCurdy Dec. 17 (UPI) -- GM Defense announced Thursday that it has started renovation of an existing General Motors building to support production of the Infantry Squad Vehicle, an all-terrain troop carrier designed to transport a nine-soldier infantry squad. The 750,000-square-foot facility is located in Concord, N.C. Construction at the facility is likely to continue into early spring, with the production line delivering vehicles in April. "We have tremendous momentum behind our ISV win, featuring a first-of-its-kind tactical wheeled vehicle that gives our Soldiers speed, durability and performance to enhance mission success," said Tim Herrick, interim president of GM Defense. "GM Defense is responsible for the design, engineering and manufacturing of the ISV. This facility will enable us to meet our customer's timeline for delivery while continuing our journey to bring commercial technologies and transformative mobility solutions to the defense market." The 5,000-pound ISV is based on the 2020 Chevrolet Colorado ZR2 midsize truck architecture and uses 90 percent commercial-off-the-shelf parts, but is engineered to fulfill military requirements and designed to provide rapid ground mobility. The ISV is light enough to be sling loaded from a UH-60 Blackhawk helicopter and compact enough to fit inside a CH-47 Chinook helicopter, and includes a Rollover Protection System for transportability on any battleground. The facility is slated to manufacture 649 ISVs in support of the production of the 2,065 vehicles GM Defense is contracted to deliver per a $214.3 million award awarded to GM Defense in June. The deal is the first major award since GM created a defense subsidiary in 2017. GM Defense delivered its first ISV to the Army in October. https://www.upi.com/Defense-News/2020/12/17/GM-Defense-begins-renovating-NC-facility-to-build-ISVs/4241608253661/

  • Here's Everything We Know About Skunk Works' Secretive 'Speed Racer' Program

    March 3, 2021 | International, Aerospace

    Here's Everything We Know About Skunk Works' Secretive 'Speed Racer' Program

    The design is primarily intended to validate new digital engineering tools and techniques, but that could be just the beginning.

All news