Dutch invest in production of combat vehicles for Ukraine

On the same subject

• 

  January 26, 2021 | International, Aerospace

  £30-million injection for UK’s first uncrewed fighter aircraft

  The UK's first fleet of uncrewed fighter aircraft is one step closer to reality following a £30-million contract to design and manufacture a prototype in a three-year deal supporting more than 100 jobs in Belfast. Published 25 January 2021 From: Ministry of Defence, Northern Ireland Office, Defence Science and Technology Laboratory, The Rt Hon Brandon Lewis MP, and Jeremy Quin MP The uncrewed combat aircraft will be designed to fly at high-speed alongside fighter jets, armed with missiles, surveillance and electronic warfare technology to provide a battle-winning advantage over hostile forces. Known as a ‘loyal wingman', these aircraft will be the UK's first uncrewed platforms able to target and shoot down enemy aircraft and survive against surface to air missiles. In a boost for Northern Ireland's defence industry, Spirit AeroSystems, Belfast, have been selected to lead Team MOSQUITO in the next phase of the Project. Utilising ground-breaking engineering techniques, the team will further develop the RAF's Lightweight Affordable Novel Combat Aircraft (LANCA) concept, with a full-scale vehicle flight-test programme expected by the end of 2023. Northern Ireland Secretary, Brandon Lewis said: This is fantastic news and underlines the distinct strengths in Northern Ireland's economy, through its advanced engineering and manufacturing capabilities. This ground-breaking project will involve significant investment which will not only support local employment, but also reinforce Northern Ireland's contribution to the security of our nation. Team MOSQUITO, which also includes Northrop Grumman UK, will mature the designs and manufacture a technology demonstrator to generate evidence for a follow-on LANCA programme. If successful, Project Mosquito's findings could lead to this revolutionary capability being deployed alongside the Typhoon and F-35 Lightning jets by the end of the decade. Defence Minister, Jeremy Quin said: This is a great win for the Northern Ireland defence industry and will showcase some of the most pioneering engineering work currently being undertaken in the UK. The £30 million project will accelerate the development of the UK's future air power by delivering cutting-edge uncrewed aircraft, maintaining our position as a world leader in emerging technologies. Working with innovative partners from across the UK, Project Mosquito is transforming traditional approaches to combat air to enable the rapid development of technology. By utilising the latest software development techniques and civilian aerospace engineering and manufacturing expertise, the project will deliver dramatic reductions in costs and development timelines, so their innovations can reach the front-line quicker than ever before. This game changing research and development project will ensure the final aircraft design will be capable of being easily and affordably updated with the latest technology so we remain one step ahead of our adversaries. The aircraft's flexibility will provide the optimum protection, survivability and information as it flies alongside Typhoon, F-35 Lightning, and later, Tempest as part of our future combat air system. Air Chief Marshal Mike Wigston, Chief of the Air Staff said: We're taking a revolutionary approach, looking at a game-changing mix of swarming drones and uncrewed fighter aircraft like Mosquito, alongside piloted fighters like Tempest, that will transform the combat battlespace in a way not seen since the advent of the jet age. Director Future Combat Air, Richard Berthon said: Project Mosquito is a vital element of our approach to Future Combat Air, rapidly bringing to life design, build and test skills for next generation combat air capabilities. Autonomous ‘loyal wingman' aircraft create the opportunity to expand, diversify and rapidly upgrade Combat Air Forces in a cost-effective way, now and in the future. As announced by the Prime Minister in November 2020, the UK's Future Combat Air System (FCAS) programme is set to benefit from a portion of the extra £1.5 billion investment into military research and development, which will help ensure our Armed Forces are prepared to meet the threats of tomorrow. LANCA originated in 2015 in Dstl to understand innovative Combat Air technologies and concepts that offer radical reductions in cost and development time and is a RAF Rapid Capabilities Office led project under the Future Combat Air System Technology Initiative (FCAS TI). The UK MOD's Defence Science and Technology Laboratory (Dstl) provides the project management and is the MOD's technical authority for LANCA and Project Mosquito on behalf of the RCO. https://www.gov.uk/government/news/30m-injection-for-uks-first-uncrewed-fighter-aircraft

• 

  May 19, 2020 | International, Aerospace

  Air Force’s Roper: 3D Printing ‘Going Like Gangbusters’

  "I've been so passionate about bringing in additive manufacturing, and small batch digital manufacturing, to help on aircraft parts availability," Air Force acquisition head Will Roper says. By THERESA HITCHENSon May 15, 2020 at 12:54 PM WASHINGTON: The Air and Space Forces are speeding efforts to adopt 3D printing as a major pillar of force sustainment, now making critical spare parts for weapon systems such as engine components for fighters and rockets. “Additive and advanced manufacturing [has] been going like gangbusters across the Air Force and Space Force — printing thousands of parts for airplanes,” Air Force acquisition head Will Roper said yesterday. “We're starting to print parts for satellites, including propulsion.” And today, the Air Force Rapid Sustainability Office (RSO) announced that it had reached a first milestone in its collaboration with General Electric to 3D print metal engine parts for aircraft — printing a metal sump pump for F-110 engines used by both F-15 and F-16 fighter jets. According to the announcement, the next phase of the program — Phase 1B , now being planned — will involve a family of parts on the TF34 engine, which has been in service for more than 40 years. “The collaborative effort between the US Air Force and GE shows great promise toward the adoption of metal 3D printed parts as an option to solve the US Air Force's current and future sustainment challenges,” Col. Benjamin Boehm, director of propulsion at the Air Force Life Cycle Management Center (AFLCMC) said in a press release. “This capability provides an alternate method to source parts for legacy propulsion systems throughout their life cycle, especially when faced with a diminishing supplier base or when infrequent demands or low volume orders are not attractive to traditional manufacturers.” GE originally approached the Air Force with the idea of a collaboration on 3D printed parts in 2019, and in April this year the service brought in the Defense Logistics Agency to help certify the GE-made parts for airworthiness. ALCMC, as we reported way back in September at the Air Force Association shindig, has also been pushing to get its depots around the country certified to print their own spare parts, beginning with those not critical to life and death. Air Force leaders see additive manufacturing as key to resolving the service's serious problems in maintaining aging aircraft and infrastructure and lowering costs. That said, the new 3D sump pump cover is an important piece of the engine. “Compared to other parts on the F110 engine, the sump cover might have lower functionality, but is incredibly important. It needs to be durable, form a seal and it needs to work for the entire engine to function – which is of course critical on a single engine aircraft like the F-16,” said James Bonar, engineering manager at GE Additive. The RSO-GE program is using a spiral development model, increasing the complexity and scale of parts printing with each phase. “In this program, complexity involves moving from simpler part identification, progressing to part and family of parts consolidation and eventually tackling complex components and systems, such as common core heat exchangers,” the press release said. Roper told reporters yesterday in a Zoom briefing that due to the COVID-19 pandemic, RSO has transformed its planned Advanced Manufacturing Olympics, originally planned to coincide with the now-postponed Tokyo Summer Olympics in late July, to a virtual event to be held November. It will allow 3D printing companies to show off their wares to potential service customers via a number of challenges, including a “printer shoot-off” and a “Box of Parts” challenge where manufacturers will compete to create a drone part without a blueprint. “We have been growing our network of small batch makers across the Air Force and Space Force,” Roper said. “I've been so passionate about bringing in additive manufacturing, and small batch digital manufacturing, to help on aircraft parts availability.” The COVID-19 crises has proven the “additive” value of tapping into a network of small manufacturers as the Air Force has scrambled to obtain personal protective equipment for airmen at far-flung bases, he explained. Because many large producers of items like face masks are overwhelmed, the service set up the “Air Force Rapid Advanced Manufacturing Portal,” or “AFRAMP,” as a method of finding and vetting small producers to meet service needs. “It's a portal where small batch manufacturers can make their capabilities known — show what they're able to produce — we vet them, and that then allows these small companies in aggregate to add up to large batch manufacturing,” Roper said. “We've already delivered over 11,000, different PPE devices to seven air bases that wouldn't have otherwise been able to get access for personal protective gear.” His hope is to expand that portal to other types of advanced manufacturing in the future. “I'm excited about scaling it up beyond just personal protective gear, and really having it be a one-stop-shop in the government for companies that can make things in small quantity — that can't mass produce, but can produce in mass if they're added up with a lot of their other sister companies.” https://breakingdefense.com/2020/05/air-forces-roper-3d-printing-going-like-gangbusters/

• 

  April 8, 2020 | International, Land

  Three of Russia’s European neighbors push for joint armored vehicle

  By: Sebastian Sprenger COLOGNE, Germany — Estonia, Latvia and Finland have signed a technical agreement for a jointly developed armored vehicle, with Estonia touting the plans as a means to jump-start the defense industry and maintain its security posture following the global coronavirus crisis. The new pact enables Estonia to continue its participation in the tri-national effort to scope out requirements for the “potential” procurement of a fleet of armored vehicles featuring common components, the Estonian Defence Ministry wrote in a statement. "We have to keep in mind that our primary goal here is to develop a platform that meets the requirements of Estonian Defence Forces with a favorable price,” Kristikan Prikk, permanent secretary at the ministry, was quoted as saying in the statement. “We see big potential in this project, especially as we are involved already in the development phase, which is the best way to secure that eventually we will have equipment that meets our needs.” The technical arrangement, inked on Monday, follows a letter of intent signed in December that laid out the broader parameters for the joint project. Estonia aims to replace its 140 Pasi armored vehicles, made by Finland's Patria and first fielded in the 1980s. The fleet is expected to reach the end of its useful life in 2024, according to the Defence Ministry. Initial results toward developing a prototype for a new vehicle are planned for this year, according to officials. “It is important for us that international defense cooperation, which has a very clear economic dimension, continues,” Prikk said. “In the current crisis, it is also crucial that we continue to strengthen our defense capability and, if possible, lay the foundation for creating new jobs or maintaining existing ones in the Estonian defense industry sector.” Estonia shares a border with Russia, as do the other two program members Finland and Latvia. Those countries have been nervous about the possibility of Russian military adventurism along its borders with the West. And with the COVID-19 pandemic wreaking havoc on national economies and testing international alliances, some issue experts believe there could be more reason to worry when the dust settles. https://www.defensenews.com/global/europe/2020/04/07/three-of-russias-european-neighbors-push-for-joint-armored-vehicle/