Back to news

October 17, 2022 | Local, Naval

Canadian Coast Guard Ship Vincent Massey joins the icebreaker fleet

Quebec City, Quebec - Enhancing the capacity of our fleet and maintaining our vessels to be reliable and safe are top priorities for the Canadian Coast Guard (CCG). Through its work, the Canadian Coast Guard's icebreaking program supports safe marine navigation in and around ice-covered waters, and ensures our waterways are safe and accessible for business year-round.

Today, the Canadian Coast Guard Ship (CCGS) Vincent Massey was delivered to the CCG upon completion of conversion work by Chantier Davie in Lévis, Quebec. The CCGS Vincent Massey has arrived at its homeport in Québec City, Québec to prepare for the upcoming icebreaking season. The vessel joins the fleet of medium icebreakers that serve to keep Eastern Canada's waterways open and safe throughout the winter months.

In August 2018, the Canadian Coast Guard purchased three medium commercial icebreakers through Chantier Davie. In preparation for service, all three vessels underwent refit and conversion work at Chantier Davie. These ships were acquired to ensure the continuation of essential icebreaking services in Atlantic Canada, the St. Lawrence and the Great Lakes, as well as the Arctic, during vessel life extension and repair periods to the existing fleet.

This acquisition and maintenance of the ships was completed under the National Shipbuilding Strategy which helps ensure the Canadian Coast Guard continues to deliver essential icebreaking services, keeping shipping routes open and safe while preventing ice jams and flooding. The CCGS Vincent Massey is also equipped to support aids to navigation and provide emergency services such as search and rescue and environmental response.

Through the National Shipbuilding Strategy, the Government of Canada is revitalizing and re-invigorating Canada's marine industry, while also ensuring employees of the Canadian Coast Guard have effective and modern equipment they need to continue serving Canadians proudly.

https://www.canada.ca/en/canadian-coast-guard/news/2022/10/canadian-coast-guard-ship-vincent-massey-joins-the-icebreaker-fleet.html

On the same subject

  • Talon Helicopters AS365 Dauphin ready to fight fires at night

    June 23, 2020 | Local, Security

    Talon Helicopters AS365 Dauphin ready to fight fires at night

    Talon Helicopters of Richmond, B.C., is ready to take on nighttime fire attack missions with its night vision goggle (NVG) approved Airbus AS365 N2 Dauphin — the only Transport Canada approved NVG night fire attack medium helicopter in Canada. The nine-passenger aircraft, configured with a night vision cockpit and cabin, has been approved for day and night fire attack operations with the Simplex Model 301 belly tank, which can hold up to 901 litres (238 gallons) of water. Peter Murray, president of Talon Helicopters, said the company is taking advantage of the benefits and safety factors of NVGs, and “the ability to not have a grounding time.” Talon's AS365 is approved to fight fires at night with the Simplex Model 301 belly tank, which can hold up to 901 litres of water. Heath Moffatt Photo He added: “With doing initial attack at night... if a fire starts at 11 p.m. and you're on it at 11:30 p.m., of course you're going to reduce the impact the fire makes if you're on it six or eight hours earlier than if you got on it in the daylight. . . . So we're right on the leading edge of all this.” The NVG certification for the Dauphin has been a multi-year project for Talon. Murray said the company has had the capabilities to fight fires at night for just under a year now, but recently received approval from Transport Canada for all part 702/703 operations with NVGs, which includes flying passengers at night. All of the company's pilots have completed basic NVG training, and “the AS365 pilots have done advanced NVG [training],” said Murray, “so they can go into remote areas and land at night with NVGs.” Murray said the Dauphin outfitted with the Simplex tank is 30 per cent faster than other belly tank-equipped mediums. “It's a fast tank for this machine. With the snorkel stowed, it's 140 knots VNE. . . . With the snorkel on its 120 [knots]. If you're going out to do initial attack and go a distance, you're going to go there at 140 knots and you're going to get there faster,” he said. The Simplex tank has an easy install process with four hard points on the aircraft, and can be removed just as easily for a different mission configuration. “You can probably do the whole hook change and remove the tank within 20 minutes or a half-hour,” said Murray. In place of the belly tank, the Dauphin can be equipped with a 350-gallon FAST Bucket for daytime wildfire operations. A multi-mission helicopter, Talon's Dauphin is also used for medevac, search and rescue, aerial lift work and passenger transport operations. “We call it the Swiss Army knife of helicopters because we have a full approved stretcher kit (we got that approved in Canada), and then we have the hoist as well; we're approved for day and night hoisting” using Transport Canada approved crew harnesses and evacuation equipment, and a 300-foot hoist cable with a 600-pound load limit. Along with its night fire attack and nighttime hoist certifications, Talon is approved for night hover entry/exit. The aircraft has a number of STC'd avionics upgrades including the Garmin GTN 750 touchscreen navigator, helicopter terrain awareness warning system, traffic collision avoidance systems, and automatic dependent surveillance-broadcast. Building on the company's NVG firefighting capabilities, Murray said Talon is looking into collecting data on daytime and nighttime fire attack operations to evaluate the difference in the cost of fighting the fires and the cost of losing resources like trees, as well as structures. For example, “what would happen if we put 20,000 litres of water around one burning tree at nighttime... what would we have in the morning? Would it be a mop up for a couple of days, instead of a two-month production?” he said. While the current Covid-19 crisis has delayed these data-gathering initiatives, Murray said the company is still working to pursue them in the near future. https://www.skiesmag.com/news/talon-helicopters-as365-dauphin-fight-fires-night

  • Remotely Piloted Aircraft Systems Project (RPAS)- Webinar

    June 15, 2020 | Local, Aerospace

    Remotely Piloted Aircraft Systems Project (RPAS)- Webinar

    AN OPPORTUNITY TO LEARN ABOUT CANADA'S LARGEST UNMANNED SYSTEMS DEFENCE PROCUREMENT Get informed on the Government of Canada's Remotely Piloted Aircraft System Project and how Canadian industry and other stakeholders can be best positioned for industrial opportunities As part of Canada's defence policy, Strong, Secure, Engaged (SSE), the Department of National Defence has committed to acquiring a Remotely Piloted Aircraft System (RPAS). This project will acquire a medium altitude and armed RPAS, along with associated equipment, weapons, infrastructure, and in-service sustainment capability. Canada's Industrial and Technology Benefits (ITB) Policy will be applied on this project, requiring the chosen supplier to make investments in Canada equal to the value of the contracts. that align with Value Proposition (VP) strategic objectives. Unmanned Systems Canada (USC) is organizing a webinar to brief Canadian industry and other stakeholders on the RPAS project, including key information on project requirements, procurement process and project timelines. The webinar will also be used to familiarize Canadian industry and other stakeholders on the ITB Policy and describe the initial Value Proposition approach. It will also describe the next steps on how Canadian stakeholders can provide input and feedback to refine the VP for this project to ensure strong economic benefits for Canada. This joint presentation will include representatives from the Department of National Defence, Public Services and Procurement Canada and Innovation, Science and Economic Development Canada. In addition, the webinar will include brief presentations from the two Qualified Suppliers on the Project: L3 Technologies MAS Inc, and General Atomics Aeronautical Systems, Inc. Webinar date: June 22nd, 2020 English session: 1:00 pm EDT French session: 2:30 pm EDT Each session is one hour in length. English webinar registration link: https://us02web.zoom.us/webinar/register/WN_Fz7G5NglR-aWIw_aW1Pa7g French webinar registration link: https://us02web.zoom.us/webinar/register/WN_XcA8YokRRw67fBL3A3dnKg Links to project information are here: PSPC Website - https://www.tpsgc-pwgsc.gc.ca/app-acq/amd-dp/air/snac-nfps/sdat-rpac-eng.html DND Website - https://www.canada.ca/en/department-national-defence/services/procurement/remotely-piloted-aircraft-system.html ISEDC - http://www.Canada.ca/ITB

  • Canadian Government Disqualifies Boeing Bid For Fighter Deal
All news