13 juillet 2020 | International, Aérospatial

USAF Picks Northrop Anti-Drone Defense System

The U.S. Defense Department has zeroed in on Northrop Grumman's anti-drone defense system for short-term use.

The company's Forward Area Air Defense Command and Control (FAAD C2) system was chosen as the interim command and control system for future Counter-Small Unmanned Aerial System (C-sUAS) procurements, the company said in a statement Wednesday.

The decision was taken by a board was comprised of representatives from the U.S. Army, Navy, Marine Corps, Air Force and Special Operations Command, and senior representatives from the acquisition, technical, operational and other communities. FAAD C2 will serve as the current joint common C-sUAS C2 platform while a more permanent solution is developed.

FAAD C2 system has also been selected as the C2 system for the Army's Initial Maneuver Short Range Air Defense (IM-SHORAD) platforms. FAAD-C2 is built on the open architecture common to the Northrop Grumman all-domain C4I solution ecosystem and will ultimately converge into the U.S. Army's Integrated Air and Missile Defense Battle Command System (IBCS).

https://www.defenseworld.net/news/27383#.XwyMMihKiUk

Sur le même sujet

  • Open source platforms, flexible airframes for new drones

    9 avril 2020 | International, Aérospatial

    Open source platforms, flexible airframes for new drones

    Kelsey D. Atherton Designing a drone body is about settling on the right compromise. Multirotor drones excel at vertical lift and hover, while fixed wing drones are great at both distance and wide-open spaces. In February, Auterion Government Solutions and Quantum-Systems announced a two-pronged approach to the rotor- or fixed-wing drone market, with a pair of drones that use the same sensor packages and fuselage to operate as either the Scorpion Trirotor or the Vector fixed wing craft. “As we started to develop our tactical UAS Platform, our plan was only to develop a VTOL fixed wing solution (like our Vector),” said Florian Siebel, managing director of Quantum-Systems. “During the development process we decided to build a Tri-Copter Platform as well, as a result of many discussions with law enforcement agencies and Search and Rescue Units.” Adapting the fixed-wing fuselage to the tri-copter attachments means the drone can now operate in narrow spaces and harsh conditions. Scorpion, with the rotors, can fly for about 45 minutes, with a cruising speed of zero to 33 mph. Put the fixed wings back on for Vector, and the flight time is now two hours, with a cruising speed of 33 to 44 mph. The parts snap into place without any need for special tooling, and Auterion recommends the drone for missions in rain or snow. Both platforms share a gimbal EO/IR with 10x optical zoom, 720p EO video, 480p IR video, laser illuminator, IR laser ranger. Common between modes is also a tactical mapping tool using a 21 megapixel Sony UMC R10C camera. For the scorpion, there's also the option of a gimbaled electro-optical camera with a 30x optical zoom. Both drones are designed to fit in rucksacks that a person can carry one at a time. While many features are common across Vector and Scorpion, the plan is not to include both rotors or wings in the same kit. Once a team packs into the field with a drone on its back, that's the mode the drone can be used in. Auterion intends to ship the drones by the fourth quarter of 2020, with preorders available. Designing a drone body is about settling on the right compromise. Vector and Scorpion are built on top of open source code. This includes an operating system capable of programmable autopilot , as well as machine-vision collision prevention and obstacle detection and avoidance. Software for the ground station and cloud data management of the drone are also built on open source code. The Pentagon's Defense Innovation Unit awarded Auterion a $2 million contract last year to work on the PX4 software to help drive compatibility standards in the drone industry. As militaries across the world look to the enterprise sector for capable drones at smaller profile than existing military models, transparency in code and flexibility in airframe could become more widely adopted trends. In the meantime, there is Vector, and there is Scorpion. https://www.c4isrnet.com/unmanned/2020/03/25/open-source-platforms-flexible-airframes-for-new-drones

  • Raytheon picks Spain’s Sener to make Patriot interceptor parts

    29 avril 2024 | International, Terrestre

    Raytheon picks Spain’s Sener to make Patriot interceptor parts

  • NDIA’s Wesley Hallman on a liability shield and other defense priorities for the next stimulus

    4 mai 2020 | International, Aérospatial, Naval, Terrestre, C4ISR, Sécurité

    NDIA’s Wesley Hallman on a liability shield and other defense priorities for the next stimulus

    By: Joe Gould WASHINGTON―As the Pentagon works to defray the coronavirus pandemic's impact on its network of suppliers, it's worked hand-in-glove with defense and aerospace trade associations to find and address problems in the supply chain. The National Defense Industrial Association, whose members stretch into the lower tiers of the defense industrial base, surveyed more than 700 small businesses to find that cash-flow disruptions remained a problem as the Pentagon and major defense firms increase payments to suppliers. Retired Air Force Col. Wesley Hallman is NDIA's senior vice president of policy, charged with monitoring Capitol Hill on matters of concern to defense, including annual budgets, acquisition and procurement reform. This week, he spoke with Defense News about NDIA's priorities as Congress mulls how to follow its third coronavirus response bill, worth $2.2 trillion and intended to speed relief across the American economy. With NDIA's finger on the pulse of the supply chain and recent survey, how do you interpret the Undersecretary of Defense for Acquisition and Sustainment Ellen Lord's numbers, demonstrating more defense firms that have closed now reopening? What are you seeing among your members? As you know, A&S has been holding a call on Mondays, Wednesdays and Fridays, and we've been participating in all of those. The Defense Contract Management Agency has really been the clearinghouse for all these companies' challenges, and in fact we've been pushing our member companies that are seeing challenges to go to the website and fill in information about what their challenges are what they're seeing. And DoD has been responsive when something has closed down for whatever reason. Undersecretary Lord herself has picked up the phone to make calls to state governors to explain that we work very hard to ensure that the defense industrial base is considered essential. That was a question when people were starting to call for shelters in place. The very issues these companies have been seeing are things you're expecting: the result of closures, and sometimes those closures aren't state and local but on installations. Many contractors have to go to work on installations, and installation commanders are the mayors of their bases; they're tasked with the safety and security of their installations, and sometimes they've made the call to close facilities that have an effect on those performing contracts. There's also a growing concern on liability. There's uncertainty surrounding contractors' liability during the crisis for heeding calls to keep everything turned on. They also have to make sure that they're keeping their workforce safe and secure, and sometimes that's an issue as you look at reopening everything. Our last NDIA survey was really about what kind of things do you need to reopen to get to a new normal, where we're producing on contracts. Access to personal protective equipment is a concern, safety is a concern and more. DCMA has been following up with those companies to see what those issues are and what would allow them to reopen. We all know the supply chain ― and I'm sure you remember our report on the health of the defense industrial base at the beginning of the year ― but one of the things we highlighted is we have a relatively fragile supply chain already. This is a concern of the associations, the Pentagon and particular House Armed Services Committee members. Cash flow was also identified as an issue in NDIA's survey, and it's been a feature of DoD's press conferences. Ellen Lord said she was relying on the trade associations to help DoD understand how its accelerated progress payments are trickling down the supply chain to smaller firms, from the primes. How detailed is the information the associations are providing, and are the primes doing what's expected of them? What I have is anecdotal. It's proprietary data, and our members don't necessarily share that with us. I did get calls from all of the majors asking about accelerating payments through the supply chain, and one company was very explicit that “we have access to capital to get through this, but our supply chain doesn't.” Lockheed Martin has been very public with their commitment, and I know they're worried, and they're incentivized to keep their supply chain healthy because they've got to produce. The companies know their supply chains better than anyone else, so they're incentivized to push those dollars. It's not the amount of money but the velocity, and they understand that. This is me talking, but what the Pentagon wants to show ― and you've seen multiple groups saying, “not a dime for defense” ― is that the money that's being accelerated to these companies is not going to line anybody's pocket. This is to allow folks to survive. And beyond the national security aspect of this, which we could talk about forever, these are real companies with real people, doing real jobs that are key to our economy. They're as valid as any of the other small businesses that apply for the Paycheck Protection Program. So, ‘not a dime for defense' is I think a very shortsighted bumper sticker, because these are real people developing real capabilities for the defense of our nation. There have been some progressive lawmakers, as well as the chairman of the House Armed Services Committee who have already pushed back on the Pentagon's upcoming request for funding. But more broadly, what would NDIA like to see legislatively in the next stimulus package, including policy―or are your priorities being addressed directly through the Pentagon? So there's only so much the Pentagon can do without appropriations. What we're looking at ― and we are a 501(c)3, non-lobbying organization, though we engage when asked what we think ― is we think, first off, there needs to be a plus-up in appropriations for FY20. We all know that there's a lot of challenges to performing on contracts right now that are going to extend the length of those contracts. There's been a slowdown in the ability to perform on contracts because of this, and in some cases it has made made delivery on contracts more expensive. We believe that should be reflected in appropriations, and that shouldn't steal from the future. You know, we have a National Defense Strategy, we have a future-years defense program, there's already president's budget in. We don't think that the FY21 should be paying the increased cost for FY20. So it would be a defense supplemental to cover the extra expense to produce on contract because of COVID-19. That's first and foremost. The other thing is ― and you may know the Defense Logistics Agency and others, they pay out of a working capital fund. Back in November, DLA stopped following the accelerated payment policy passed by Congress because their working capital fund didn't have the liquidity to make that happen. They backed off to a 30-day instead of a 15-day payout. Well, that was hard enough in November, December, January, February. But you start getting to March with COVID-19, and these folks that have already performed on contract and are waiting to get their money are waiting an extra 15 days because of the lack of liquidity in the working capital funds. That's not acceptable. So another thing we'd like to see is a bump up in the working capital fund so those accelerated payments can start happening the way that Congress intended. You referenced liability issues. There's been a movement afoot to shield companies from lawsuits as they seek to reopen that's been met with partisan pushback. Are liability protections something NDIA favors? You have to be very careful because you don't want companies to do something that is not smart or not safe, but you do have to look at it because there's a potential that this is a ripe avenue for liability suits. We would rather see that stemmed up front so we can focus on producing for the war fighter. On a positive note, are you seeing companies employing any novel solutions to problems stemming from the pandemic? The Defense Department has a Joint Acquisition Task Force where companies can go and say what they can produce. We have worked with a lot of companies who can do harnesses for parachutes or where they can shift production to make you masks or other PPE. So it's been kind of heartening to see. A lot of small businesses are saying, ‘Hey, we can do this.' And we direct them over to the Joint Acquisition Task Force, which can look at their capabilities and explore those. https://www.defensenews.com/congress/2020/05/02/interview-ndias-wesley-hallman-on-a-liability-shield-and-other-defense-priorities-for-the-next-stimulus

Toutes les nouvelles