10 décembre 2018 | International, Aérospatial

On the ground at Yokota Air Base, the Air Force transport hub of the Pacific

By:

MELBOURNE, Australia — In the west of the sprawling metropolis that is Tokyo lies Yokota Air Base, a major air transportation hub in the U.S. military's Indo-Pacific Command's area of responsibility and a critical waypoint for cargo, passengers and VIPs.

Occupying an area of approximately 2.75 square miles that includes a single 11,000-foot runway that runs roughly north to south, the base is also home to U.S. Forces Japan, a joint service headquarters coordinating matters affecting U.S. and Japanese defense relations, and Fifth Air Force, whose mission is to enhance the U.S. deterrent posture and, if necessary, provide fighter and military airlift support for offensive air operations.

Other tenant units on base include the 730th Air Mobility Squadron of the 515th Air Mobility Operation Group, which manages air mobility operations throughout the Western Pacific, and the Japanese Air Defense Command, which controls Japan's air defense mission. Air traffic control for the base is integrated with Tokyo's air traffic system, a must given the busy nature of the skies above the Japanese capital with its two international airports and a number of Japanese Self-Defense Force bases in the vicinity.

As a logistics hub, Yokota plays host to all kinds of visiting aircraft on a regular basis, with Captain Felicia Ticas, airfield operations flight commander, telling Defense News that the base “accepts around 2,100 transient aircraft annually, which includes U.S. Air Force, Japanese Self Defense Forces, and other allied aircraft.”

She added: “Our role as the primary logistics hub means we move 85,000 personnel and 19,000 tons of cargo every year in and around Indo-Asia-Pacific, which is essential to meet the peace and stability objectives of our nation and our allied partners.”

The visitors have included secretaries of state and defense Mike Pompeo and James Mattis during their visits to the region, as well as President Donald Trump who landed there during a visit to Japan in November 2017.

374th Airlift Wing

The host unit at Yokota is the 374th Airlift Wing. The Wing includes four groups: operations, mission support, maintenance and medical. Each group manages several squadrons in order to carry out the wing's mission, which is to execute rapid global mobility through agile airlift operations across the Indo-Asia-Pacific region and as the primary Western Pacific airlift hub for peacetime and contingency operations, the wing provides airlift for the movement of passengers, cargo and mail to all Department of Defense agencies in the Pacific area of responsibility and provides transport for people and equipment throughout the Kanto Plain and the Tokyo metropolitan area.

In addition to the Lockheed-Martin C-130J Super Hercules tactical airlifters of the 36th Airlift Squadron, the other flying squadron at Yokota is the 459th Airlift Squadron. The unit operates a mixed fleet of Bell UH-1N helicopters and Raytheon C-12J Hurons to fulfil its mission of providing airlift support for distinguished visitors as well as other priority passengers and cargo, along with conducting aeromedical evacuation, search and rescue and priority airlift missions throughout the Pacific.

The UH-1N Huey, whose design dates back to the Vietnam War, is used by the 459th AS to provide distinguish visitor and cargo transport throughout the Kanto Plain which encompasses the Greater Tokyo area, according to Major Matthew Sims, assistant director of operations of the 459th AS. In addition, he told Defense News that the type is also used to provide medical transport and search and rescue assistance for the government of Japan, and can be configured with a rescue hoist and litters for medical cases as the mission requirements demand.

The twin turboprop-engined C-12J Hurons serving alongside the UH-1Ns at the 459th AS are used primarily for VIP transport. However, they have also become the primary response aircraft for small-scale aeromedical evacuation. An aeromedical evacuation nursing team is now deployed to the base on a rotational basis, with each team there two- to three-week deployment to support the mission.

The use of the C-12J, which is based on the Raytheon 1900C regional airliner, has significantly freed up the USAF's primary aeromedical evacuation platform, the KC-135R tanker, to perform its primary role and Major Drew Skovran, 459th AS Assistant Operations Officer called the C-12J “the most cost-effective airlifter for small groups in the PACAF inventory carrying 10-18 passengers or up to 3000 lbs of cargo. With the addition of a converted hospital bed we are one of the premier platforms for aeromedical evacuation for all joint partners in the AOR”.

Non-flying elements of the Wing includes the 374th Logistics Readiness Squadron, which directs logistics for Western Pacific airlift hub orchestrates mobilization of wing and tenant units supporting Pacific Command's operations plans, currently stores over 13 million and issues over 36 million gallons of fuel.

Part of the unit includes its Combat Mobility Flight, which is responsible for the support of real-world contingencies, INDOPACOM and/or PACAF exercises, and humanitarian assistance/disaster relief mission support. It is also “the only PACAF unit that builds and specializes in coastal humanitarian air drop, allowing for specialized humanitarian relief aid avoiding possible damage to people and buildings” according to Technical Sergeant Ryan Aubert, a Recovery Lead at the 374th Logistics Readiness Squadron's Combat Mobility Flight

Air Force Ospreys

The sole USAF flying element at Yokota that is not part of the 374th AW are the Bell-Boeing CV-22 Osprey tiltrotor aircraft assigned to the 353rd Special Operations Group. The first five Ospreys arrived at Yokota in April this year, and that number will eventually rise to ten. Four of the unit's Ospreys were subsequently deployed to Iwakuni to take part in search and rescue operations following the collision of a U.S. Marine Corps KC-130J tanker and F/A-18D Hornet fighter jet off Japan in early December, joining the C-130Js of 36th AS along with other U.S. military and Japanese Self-Defense Force aircraft.

The 353rd SOG is based out of Kadena Airbase in Okinawa operating the MC-130H Combat Talon II and MC-130J Commando II special missions aircraft modified from the C-130 Hercules, and according to 1st Lieutenant Renee Douglas, a spokesperson from the unit, the CV-22Bs are based at Yokota because the base “was the location that provided the most effective operations, training and maintenance environment for the CV-22.”

Due to training and operational requirements, Defense News was unable to speak to the Osprey detachment at Yokota to learn more about their mission, but 1Lt Douglas added in an emailed response to questions from Defense News that “having CV-22s at Yokota Air Base will help our forces develop expertise, build long-term relationships with the host nation to ensure stability, and contribute to special operations capabilities with our allies and security partners.”

The continuing security challenges in the region and the presence of forward deployed elements of the U.S. military means that Yokota's status of a regional logistics hub is here to stay and even increase in the future. Asked to sum up the importance of the base and the wing's mission, Colonel Otis Jones, commander of the 374th AW, told Defense News that “because of our proximity to Tokyo, along with the unique airlift capabilities we contribute to the region, Yokota, and specifically the 374th Airlift Wing, provides an advantageous hub for cargo and personnel moving into and out of the Pacific area of responsibility.” The wing also executes rapid global mobility through agile airlift operations across the Indo-Asia-Pacific region and engages in regular bilateral engagements with the Japanese Self Defense Force, surrounding communities and the local Japanese government.

https://www.defensenews.com/digital-show-dailies/japan-aerospace/2018/12/07/on-the-ground-at-yokota-air-base-the-air-force-transport-hub-of-the-pacific/

Sur le même sujet

  • Thales launches a new integrated 24/7 NOC-SOC in the Netherlands

    24 juillet 2020 | International, C4ISR, Sécurité

    Thales launches a new integrated 24/7 NOC-SOC in the Netherlands

    July 21, 2020 - Thales has expanded managed services for its customers with the launch of a new integrated Network Operations Center (NOC)/ Cybersecurity Operations Center (SOC) in the Netherlands. With trained experts present 24/7, the integrated NOC-SOC can provide organisations with premium services for IS-IT asset management and cybersecurity supervision, a critical necessity following the explosion of remote working during the Covid-19 crisis. With more than 40 years of expertise, Thales already serves more than 40 clients around the world through its five existing Cybersecurity Operations Centres (Canada, France, Hong Kong, Netherlands, United-Kingdom). Forming part of Thales's international network of premium Cybersecurity Operations Centres, the Group's first integrated Network Operations Centre (NOC) and Security Operations Centre (SOC) will simultaneously monitor customers' IT and OT infrastructure 24/7. Since IT/OT assets in the new NOC/SOC are monitored from the Netherlands, data remain in the country and sensitive information is viewed only by screened personnel. Being able to deliver these secure integrated managed services in the Netherlands is a first for Thales. As a rule, organisations outsource night-time monitoring to SOCs in other countries. From now on, Thales will be able to offer this service for and from the Netherlands. The NOC currently analyses anonymised transaction data from public transport companies 24/7 in order to rectify faults, and the SOC focuses on monitoring the computer and network activities of critical infrastructure companies, while keeping the networks physically separate. The NOC monitors mainly systems availability, while the SOC monitors cyber security. This enables both services to intervene quickly in the event of an incident, shortening any downtime and reducing damage. Now the two centres have been merged so that the teams have everything at their disposal to further optimise service levels and meet the highest standards of security. SOC and NOC employees are screened and trained to meet far-reaching Dutch quality standards and SOC services fully comply with Dutch legislation and regulations (ISO 27001 and NEN 7510). Thales has more than 15 years' experience in managed cybersecurity services worldwide. The Group is positioned as the trusted partner of choice for the most demanding organisations worldwide in terms of cybersecurity, operating five premium Cybersecurity Operations Centers around the world, in France, the United Kingdom, the Netherlands, Canada and Hong Kong. "I am proud of this next step in our provision of services, as a result of which we are the first to offer 24/7 monitoring of assets and IT on Dutch soil," said Mark Donderwinkel, VP Thales Secure Communications and Information Systems."As a result of Covid-19, much more use is being made of remote collaboration tools. This is making organisations more vulnerable, and the number of cyber attacks is rising sharply. Now that we are in a phase of opening up our infrastructure and networks, it is crucial that downtime is kept to the absolute minimum. In order to achieve this, better monitoring is necessary, both of assets and of computer and network activities. We can now provide our customers with the highest and continuous level of service for both asset management and cyber security." View source version on Thales: https://www.thalesgroup.com/en/group/press-release/thales-launches-new-integrated-247-noc-soc-netherlands-0

  • F-35 Costs Drop for Building Jets But Rise for Operating Them

    29 mai 2020 | International, Aérospatial

    F-35 Costs Drop for Building Jets But Rise for Operating Them

    By Anthony Capaccio 29 mai 2020 à 04:00 UTC−4 The Pentagon's costliest program, Lockheed Martin Corp.'s F-35, is starting to look a little less expensive, with the latest estimate for development and procurement down 7.1% to $397.8 billion. Less encouraging for the lawmakers who craft defense budgets and for taxpayers: Operating and maintaining the fleet for 66 years is projected to cost $1.182 trillion, a 7.8% increase over the estimate from the Pentagon's F-35 office last year, according to the Defense Department's annual assessment of the jet obtained by Bloomberg News. The lower acquisition estimate produced by the F-35 program office is the latest in a string of good news that also includes improved on-time delivery of aircraft, the elimination of all flaws that were considered life-threatening to pilots and a steady reduction since 2018 in the number of potentially mission-crippling software deficiencies. The Selected Acquisition Report, which hasn't been released to the public, also said the F-35 program anticipates sales over time of 809 aircraft to international partners, up from the 764 projected last year. Cumulatively, the improvements might protect the F-35 from pressure to cut defense budgets as the federal deficit balloons due to spending for the Covid-19 pandemic. The Pentagon is already projecting mostly flat budgets through 2025. Even under the current budget forecast, the Pentagon report discloses that previous plans to buy 94 F-35s in fiscal 2022 will be reduced by nine. The blueprint then calls for buying 94 each year in fiscal 2023 and 2024 and 96 in fiscal 2025. Those are up from the 79 requested for fiscal 2021. The report was prepared in December before the coronavirus pandemic crippled the global economy. Lockheed announced last week that Covid-19 impacts will temporarily slow F-35 production because of subcontractor parts delays and that the Bethesda, Maryland-based company might fail to deliver as many as 24 of a planned 141 jets this year. Earlier: Lockheed Slows F-35 Production on Covid-Related Parts Delays More than 500 of a potential 3,200 F-35s for the U.S. and allies already have been delivered and will have to be retrofitted as flaws are fixed, at a cost of as much as $1.4 billion. The F-35 is in the final stages of intense combat testing to demonstrate it's effective against the most advanced Russian, Chinese and Iranian threats. Lockheed spokesman Brett Ashworth said the report “highlights our ability to work with our partners to produce the world's most advanced fighter at the cost of legacy aircraft” the F-35 is intended to replace. Brandi Schiff, a spokeswoman for the Pentagon's F-35 program office, declined to comment on the report before its release. The Pentagon assessment says that updating its numbers based on actual production performance data by Lockheed and its subcontractors, rather than projections, resulted in the reduction in acquisition cost estimates. For example, the “unit flyaway cost” of an F-35 for the Air Force's version of the fighter, not including the engine, declined by $12.1 million to $57.4 million. The Air Force plans to purchase 1,763 jets, the most of the U.S.'s planned 2,456 aircraft. The Marine Corps version dropped to $72.1 million from $80 million, and the Navy model fell to $72.3 million from $79.5 million. None of that resolves the projected long-term trillion-dollar burden of operating and sustaining the fleet through 2077. Outlining the stakes, then-acting Defense Secretary Patrick Shanahan said in March 2019 that “this is the largest program in DoD history and the cost of sustainment is about the same cost as nuclear modernization.” In the new report the F-35 program office said that it “remains committed to and continues pursuing multiple efforts to drive down” those costs. https://www.bloomberg.com/news/articles/2020-05-29/f-35-costs-drop-for-building-jets-but-rise-for-operating-them

  • Studies Seek to Industrialize Additive Manufacturing for Aerospace

    9 août 2018 | International, Aérospatial

    Studies Seek to Industrialize Additive Manufacturing for Aerospace

    Lindsay Bjerregaard Oerlikon is partnering with Boeing and Lufthansa Technik to research standardization and qualification of additive manufacturing processes. Oerlikon is pairing up with major aerospace players to make additive manufacturing (AM) a more feasible option for industrialization. The Swiss technology and engineering group has signed agreements this year with Lufthansa Technik (LHT) and Boeing to collaborate on research into ways AM for aerospace can be more easily standardized and qualified. The most recent of these agreements is the memorandum of understanding (MoU) with LHT, which aims to establish “robust and repeatable processes for AM in the aircraft MRO industry.” According to a spokesperson for Oerlikon, the collaboration's research seeks to understand what process variability exists when the same component geometries are built on the same machine using the same powder batch, heat treatment, testing conditions and build parameters in different global locations. Oerlikon and LHT will print these components using an Oerlikon-produced IN718 powder alloy on identical printers at LHT Hamburg and Oerlikon's locations in Charlotte, North Carolina and Barleben, Germany. Once the variables are identified, the study's objective is to understand how they can be controlled to achieve repeatable processes—which will ensure that all parts meet quality requirements and reduce the cost of recurring quality validation, according to Oerlikon. The company says this repeatability could also provide potential savings in procurement, warehousing and supply chain management. For now, the partnership is set for a one-year period, but the companies say the scope and timeframe is likely to increase. Meeting the challenges of qualifying AM materials and processes for aerospace is also at the heart of Oerlikon's collaboration agreement with Boeing. The five-year agreement, which was signed in February, seeks to develop standard materials and processes for metal-based AM. The collaboration's research will initially focus on industrializing titanium powder bed fusion AM. The companies say that in addition to meeting qualification challenges, it will enable them to “provide a route for the adoption of AM with a qualified supply chain that achieves quality and cost targets.” Full Article: https://www.mro-network.com/emerging-technology/studies-seek-industrialize-additive-manufacturing-aerospace

Toutes les nouvelles