U.S. Defense Industry Could Change In Blink Of An Eye

Sur le même sujet

• 

  2 mai 2019 | International, Terrestre

  Army to outfit all Double V-Hull Strykers with 30mm firepower

  By: Jen Judson WASHINGTON — The Army has decided to outfit all of its brigades equipped with Double V-Hull A1 Stryker Infantry Carrier Vehicles with 30mm guns following an evaluation of the vehicle equipped with the cannons in Europe, according to an Army official. The service plans to open up a competition to integrate and field up-gunned DVHA1, the official told Defense News on background. The Army Chief of Staff Gen. Mark Milley and the Army Requirements Oversight Council decided on March 20to equip future Stryker brigades with 30mm Medium Caliber Weapon System (MCWS) capability after reviewing lessons learned from the 2nd Cavalry Regiment in Europe, but also directed the Army to ensure that the new MCWS capability be applied to the more mobile, better protected DVH ICVVA1 that will be the basis for the future Stryker fleet, according to the official. Based on an urgent operational need out of Europe, the Army was provided emergency funding from Congress in 2015 — a little over $300 million — to rapidly develop and field a Stryker with a 30mm cannon specifically for the 2nd Cavalry Regiment, which is permanently stationed in Germany. The funding covered development, eight prototypes and upgrades to 83 production vehicles, as well as spares. The Army spent 18 months to put together its upgunned Stryker using off-the-shelf solutions, such as the remote turret, from Kongsberg in Norway, and the 30mm cannon from Orbital ATK and shipped those vehicles off to Europe for an evaluation that went on for the better part of a year. The plan going forward is to execute a competition in two phases to select a 30x173mm-equipped MCWS integrated onto a Stryker DVH ICVVA1, the official said, which will lead to equipping the first brigade with a new capability in fiscal year 2022. Army Contracting Command released a Request for Quote to begin the first phase of the Stryker MCWS program on April 9. The recent request called for integration designs. The Army will award up to seven design integration study contracts for potential vendors to study integrating a MCWS onto a Stryker ICVVA1 platform. The Army will supply both a Stryker platform and the XM813 30mm cannon to build production representative system samples, the official said. The service will then circulate a draft request for proposal this fall to begin the second phase of the program, which will establish a full-and-open competition to award a production contract for a MCWS integrated onto an ICVVA1, which will be based on vendors' production representative system samples and proposals. The MCWS will be part of a suite of lethality improvements for Stryker formations which include the Common Remote Operated Weapons Station-Javelin (CROWS-J) — that was also on the Stryker ICV Dragoon in Europe — and the Stryker Anti-Tank Guided Missile Vehicle (ATGM) engineering change proposal program. The Army is also developing a host of other capabilities for the Stryker through the Army Futures Command Cross-Functional Team initiatives, according to the official. Col. Glenn Dean, the Stryker program manager, told Defense News last fall that between early user testing in 2018 and subsequent fieldings, there had been an overall “very positive response” to the lethality and effectiveness of the Stryker ICVD. “The cannon provides a tremendous standoff and additional maneuver space, and it is very effective against the threats they are concerned about in Europe,” he said. But some feedback suggested that the physical layout of the vehicle could use some improvements, particularly when it came to situational awareness. The turret for the cannon takes up a lot of roof and hatch space and also affects how equipment is stowed. But the Army was already making modifications to the Dragoon based on feedback from the field, according to Dean. It is unclear what the specific requirements might be for a more lethal Stryker, but one factor up for debate could be whether there is a need to reload and operate the turret under armor, which could change the physical nature of the vendors' designs. Another issue to work out is what is necessary for a field-of-view inside the vehicle and how that might be achieved and who might control the cameras providing a view of the battlefield. Soldiers in the Stryker ICVD noted a lot of dead zones where users couldn't see. The Army made improvements to the cameras used on the vehicles in Europe providing an overlapped field-of-view. https://www.defensenews.com/land/2019/05/01/army-to-outfit-all-double-v-hull-strykers-with-30mm-firepower/

• 

  22 mai 2020 | International, Aérospatial, Naval, Terrestre, C4ISR, Sécurité

  French defense industry plays catch-up as lockdown partially lifts

  By: Christina Mackenzie PARIS — As France slowly emerges from an almost complete industry shutdown imposed March 16 in response to the COVID-19 pandemic, defense company executives are considering their next steps. Stephane Mayer, Eric Trappier and Herve Guillou — respectively presidents of the groups of French industries for land and air-land (GICAT), air and space (GIFAS), and naval (GICAN) systems — were witnesses at an April 23 hearing by the National Assembly's Defence Committee. They said that despite the partial return of employees to work, the supply chain is still experiencing problems. The three industry leaders explained that following discussions with unions and the implementation of modifications in the workplace that enable employees to work while maintaining a distance of at least 1 meter between each other, about 30 percent of the workforce on production sites was back by April 23. Those able to work from home are doing so, they added. More employees returned to work on May 11 when the lockdown was eased, but personnel who can continue to work from home are being urged to do, they said. Meanwhile, shifts are being modified to ensure workers don't arrive and leave at the same time, they added. However, all three agreed that the supply chain had been interrupted, most notably in the aeronautical sector because of its dual military-civilian role and the near-total halt in air traffic, which negatively affected imports. They explained that during the lockdown, defense industry leaders and the French procurement office DGA jointly set out priorities for programs and established what activities must be maintained to ensure the military continues its missions within France and in foreign theaters. How are exports performing? All three were also unanimous in their analysis that the French defense sector could take a hit in the export market, noting that German companies never completely stopped their activities; China was quick to reconnect with potential export clients; and the American defense sector benefits both from the continuation of much of its production capacity and massive support from the federal government. This was later repeated by Guillou at a video conference organized this week by the Foundation for Strategic Research think tank. “None of us can survive unless we have 50 percent of our order intake from the export market," Guillou said. "Even if the French market returns to normal, we still have that 50 percent export segment to worry about. If we want to remain competitive on the world export market, keeping in mind that the Chinese ramped up before we did, that the Russians, Germans and Dutch never stopped, we will have to restore our competitivity extremely quickly ... to stay in the race and not lose a part of this market forever.” He also stressed that the need to catch up is a major concern of the French defense industry. What about the supply chain? The supply chain in France is largely made up of small and medium-sized enterprises. Eric Beranger, CEO of European missile-maker MBDA, told French Armed Forces Minister Florence Parly on May 6 that some of the 1,200 French suppliers that work for the company are now very fragile due to the developing economic crisis. Guillou remarked during the video conference that the “terrific solidarity” among the supply chain and subcontractors, as well the prime contractors in the naval sector, is something he'd never come across in his 40-year career. But he added that the small and medium-sized enterprises serving the aeronautical sector are suffering more. The Armed Forces Ministry began slowly ramping up on May 7 based on two principles: preserving the health of staff and their families (all personnel, civilian or military, have been given masks, which must be worn by those who work in confined spaces such as workshops, restaurants or vehicles); and continuing with the ministry's essential mission. This includes programs meant to keep fielded weapons and equipment in operational condition, but it also concerns the delivery of new materials. “The reversibility of the procedures means that were the epidemic to break-out again within the ministry we would be able to handle it,” a May 7 ministry statement said. https://www.defensenews.com/industry/2020/05/21/french-defense-industry-plays-catch-up-as-lockdown-partially-lifts/

• 

  21 mars 2024 | International, Terrestre

  Rheinmetall wins 2.7-bln-eur order for heavy weapons carriers from Germany