Boeing, Red 6 complete first augmented reality test flight on TA-4J aircraft - Skies Mag

Sur le même sujet

• 

  9 avril 2019 | Local, Aérospatial

  Marinvent Announces Successful Delivery to Government of Canada of its APM Product

  Montreal, Canada, April 2, 2019 – Marinvent is pleased to announce the successful delivery of its Airfoil Performance Monitor product (APM) to the Government of Canada following extensive independent flight testing by the National Research Council under the Build in Canada Innovation Program (BCIP). APM monitors and displays the margin to stall of an airfoil and detects the real-time effects of icing, contamination, and degradation on the lifting surface of any airfoil and in all phases of flight. The recently-concluded flight evaluations conducted independently by NRC-FRL conclusively demonstrated the following unique capabilities of APM: Provides stall warning and backup airspeed indications and is completely independent of all aircraft-side inputs except power. (it needs no airspeed, air data, angle-of-attack, or flap position inputs). Gives the correct stall warning margin, even with contaminated (iced or otherwise degraded) airfoils. Correctly detects compressibility stalls at high altitude. Provides tail stall warning which is particularly relevant to a number of UAV platforms. Provides correct diagnosis of contamination early during the takeoff roll (Air Florida Flight 90, Arrow Air, and Dryden, among others). Provides real-time data enabling significantly reduced fuel consumption and brake wear and enabling better predictive maintenance scheduling, helping to pay for itself by reducing aircraft operating costs. “APM is a mature product having been successfully tested on several Part 25 jet and turboprop aircraft, as well as numerous Part 23 light aircraft and business jets”, said Dr. John Maris, President of Marinvent. “It is available for installation today. The Canadian government is our first customer under the BCIP program, and we have also made our first forays into the UAV market, which desperately needs this technology particularly for Canadian winter operations”. Dr. Maris, whose doctoral thesis “AN ARCHIVAL ANALYSIS OF STALL WARNING SYSTEM EFFECTIVENESS DURING AIRBORNE ICING ENCOUNTERS” led to the final development of APM, has made his academic life's work the study of the relationship between aircrew and angle of attack/stall warning systems. He is one of the world's leading authorities on this subject, which is particularly pertinent currently, and is also a Transport Canada Test Pilot DAR. Dr. Maris is an Adjunct Professor at Concordia University in Montreal, Canada as well as being President of Marinvent Corporation and inventor of APM. In recognition of the potential impact of APM, SAE named APM as the 2017 Aerospace & Defense category winner in their Create the Future competition: https://contest.techbriefs.com/2017/entries/aerospace-and-defense/8422 About Marinvent – Marinvent is a privately held Canadian company, founded in 1983. Marinvent is headquartered on the outskirts of Montreal, the leading aerospace center in Canada and one of the largest aerospace centers in the world. Marinvent provides consulting, services, training, tools and IP to reduce customers' program/product risk, cost and schedule and to help them innovate quickly. Its engineers, experience, TCCA DARs, flying avionics test bed, research simulator and IP make it a reliable and trusted partner for the planning and management of projects, regardless of size and complexity. Marinvent's customers include aircraft OEMs, integrators, tier 1s, tier 2s and Government customers around the world. Marinvent prides itself of helping its customers bring their products to market and has a stellar track record of doing exactly that. As a result, Marinvent has won numerous awards in recognition of that fact. http://www.marinvent.com/wp-content/uploads/APM-First-Customer-April-2019.pdf

• 

  1 avril 2019 | Local, Naval

  Two federal ministers offer lifeline for Quebec’s Chantier Davie shipyard

  By Kevin Dougherty QUEBEC—Finance Minister Bill Morneau and Families, Children and Social Development Minister Jean-Yves Duclos offered hope on Friday that the Chantier Davie shipyard in Lévis, across the St. Lawrence from the provincial capital, would soon be busy working on federal shipbuilding contracts. Chantier Davie is well-placed to be awarded contracts to build three new federal ferries and is also a contender to win contracts to refit Canada's 12 naval frigates, noted Duclos, who is also MP for Québec riding, taking in the city's core. Morneau has been using a pause this week in Parliament to travel across Canada touting the benefits of the budget he presented March 19. He was asked after his chamber of commerce speech about specific commitments for the Quebec City region, such as Mayor Régis Labeaume's proposed tramway and the repainting of the rust-marred Quebec Bridge. “The money is there for the tramway,” Morneau said. There is also federal money to repaint the bridge, the finance minister added. But negotiations are continuing with the province. Asked about a proposal for more rapid, more frequent passenger rail service between Montreal and Quebec City, Morneau said, “We need to have more information.” Then he added, with a smile, “If we had more Liberals MPs (from the region), that would make it easier.” Last January, Liberal leader Justin Trudeau left his chamber of commerce audience in Quebec City cold, rejecting appeals to grant Davie a contract to build a new supply ship for the Royal Canadian Navy. “The navy doesn't need a second supply ship now,” Trudeau said, in reply to representatives of Davie's union and representatives of nearly 900 companies in Davie's supply chain. Chantier Davie, as Canada's oldest and largest shipyard has been known since a 2012 ownership change, is dependent on the boom-bust cycles of stop-and-go government contracts. In 2011, when the Conservative government was awarding billions of dollars in shipbuilding contracts, Davie, then bankrupt, was excluded, with all future navy and coast guard ships to be built by smaller shipyards, Irving Shipbuilding in Halifax and Seaspan in Vancouver. In 2015, before the federal election, Davie proposed to the Conservative government of Stephan Harper that it convert a German container ship into a supply ship for the navy. Ottawa was in a jam then after Canada's two outdated supply ships had been scrapped and the navy was relying on the Spanish and Chilean navy supply ships. Davie delivered the Asterix supply ship on time and on budget in 2017. Since that time, the company has been calling on Ottawa to order the Obelix, a twin supply ship to the Asterix for the navy. On Thursday, visiting Conservative leader Andrew Scheer said if he was prime minister, the Obelix would go ahead, winning applause from his chamber of commerce audience. Scheer also endorsed the “third link,” Premier François Legault's pet project, the plan, which is yet to reach the planning stage, to build a third bridge or tunnel across the St. Lawrence. Joël Lightbound, who with Duclos makes up the two-MP Liberal caucus in Quebec City, where the Conservatives dominate, deadpanned to reporters, “One more step and Mr. Scheer would have promised world peace and the return of the Nordiques.” On Friday, it was the turn of the two Liberal ministers. Asked by a reporter what commitments the Trudeau government was prepared to make for Davie, a major employer in the region, Morneau called Davie “important for our industry in Canada.” Morneau suggested that if reporters spoke to Davie representatives at the luncheon, “You will see the smiles on their faces.” Duclos added that Davie was “wrongfully harmed” by being excluded from the Harper government's National Shipbuilding Procurement Strategy. “There are things that the previous government did that our government cannot undo,” he added. In helping Davie, the federal government agreed to its offer to convert three icebreakers, built for cancelled offshore oil-drilling projects, for the Canadian Coast Guard. “You saw the three icebreakers we acquired a few months ago,” Duclos said. “The first icebreakers the government has acquired in 25 years.” Frédérik Boisvert, vice-president of Davie and one of the Davie representatives at the chamber of commerce luncheon, said the ferry and frigate refit contracts have not been awarded yet. But Davie is confident. “We're extremely well-positioned,” he said. “You can quote me on that, given that the other two shipyards are at full capacity.” The Morneau budget called for replacing the MV Madeleine, linking Quebec's Îles de la Madeleine with Prince Edward Island; the MV Holiday Island, running between P.E.I. and Nova Scotia; and building a new ferry for Marine Atlantic, linking Newfoundland to the continent. “They have to be built in Canada,” Boisvert said. “The two other shipyards are at full capacity so, logically, it's coming to us,” he said. “Maybe (there will be) an announcement before the end of June.” On the frigate refits, Davie is hoping to get contracts to refit at least four of the warships. “Negotiations are underway, and they should be wrapped up soon.” https://ipolitics.ca/2019/03/29/two-federal-ministers-offer-lifeline-for-quebecs-chantier-davie-shipyard/

• 

  25 octobre 2018 | Local, Aérospatial

  An Investment in Capability

  If you're planning to become hopelessly lost, my advice is to do it in Norway. That was the author's conclusion after Skies was invited to the Leonardo Helicopters facility in Yeovil, England, to fly the latest variant of the AW101 search and rescue (SAR) helicopter. The machine was brand new, pending delivery to Norway, but represented a configuration that Leonardo has proposed to the Royal Canadian Air Force (RCAF) as an upgrade for Canada's fleet of CH-149 Cormorant SAR helicopters. AN OPPORTUNITY FOR THE RCAF The CH-149 Cormorant entered RCAF service in 2002. While not an old airframe by Canadian standards, the subsequent evolution of the model has left our version somewhat dated, and Leonardo maintains that obsolescence issues are beginning to adversely affect operational availability Team Cormorant is an industry consortium composed of Leonardo Helicopters, IMP Aerospace & Defence, CAE, GE Canada and Rockwell Collins Canada. The group's unsolicited proposal to the Air Force is intended to guard against creeping obsolescence and ultimately to reduce the cost of operating the helicopter. Under Team Cormorant's proposal, the RCAF would also acquire a training facility with a modern full-mission simulator, likely to be installed at 19 Wing Comox, B.C. The machine on offer to Canada is an extensively upgraded version of the RCAF's existing airframe, based upon the AW101-612 configuration; 16 of which are destined for Norway under its Norwegian All-Weather SAR Helicopter (NAWSARH) program. Team Cormorant's proposal to Canada also seeks to take advantage of nine former VH-71 Kestrel airframes from the cancelled U.S. presidential helicopter program, acquired by the RCAF in 2011. These would be used to augment the Cormorant fleet from the current 14–widely acknowledged as inadequate for Canadian SAR requirements–up to potentially 21 machines. Enhanced fleet size would allow the RCAF to base the Cormorant at 8 Wing Trenton, Ont.; a move that would improve SAR capability in the vast Trenton SAR region. Compared to in-service CH-149 Cormorants, the upgrades on offer include new, more powerful, full-authority digital electronic-controlled (FADEC) General Electric CT7-8E turboshaft engines; a more modern Rockwell Collins cockpit and avionics suite; improved aircraft management system; and a newly designed, four-axis dual-duplex digital automatic flight control system (AFCS). The sensor package promises the biggest capability upgrade, and includes an electro-optical surveillance system; a multi-mode active electronically-scanned array (AESA) radar; cell phone detection and tracking system; and marine automatic identification system (AIS) transponder receiver. AN OPPORTUNITY FOR COMPARISON In 2016, Skies dispatched me to fly the CH-149 Cormorant with RCAF's 442 Squadron at CFB Comox. It was an opportunity for this former Air Force CH-113/A Labrador SAR pilot to see first-hand how the Cormorant had changed the job I did decades ago in those same mountains. I recall that the Cormorant brought a lot of new technology to the SAR business, but the basic mission, like the mountains around us, was unchanged. After that flight, I reported: “Flying SAR was still a matter of cautious and skillful flying, using maps and looking out the window.” That experience left me with great regard for Air Force SAR crews and for the operational capability of the Cormorant, but also bemused to find that the business of searching still basically relied upon the “Mark 1 eyeball.” A flight in the latest variant of the AW101 was a terrific opportunity for a more contemporary comparison. The experience would demonstrate that leading-edge systems–particularly electro-optic sensor technologies–offer SAR capabilities that are as much a generational improvement over the current Cormorant as the Cormorant was over my beloved ol' Labrador. A CANADIAN FLIES A NORWEGIAN HELICOPTER IN ENGLAND Leonardo Helicopters test pilot Richard “Russ” Grant kindly offered me the right seat for our demonstration flight. Veteran flight test engineer (FTE) Andy Cotton served as sensor operator. Conditions were ideal, under a clear sky with a warm (24 C) gentle breeze along the century-old former-Westlands grass runway. Our test helicopter was the sixth production machine destined for Norway, operated by Leonardo under U.K. Ministry of Defence registration ZZ015. The helicopter's empty weight was 11,039 kilograms with much of its SAR interior yet to be fitted. Adding 2,000 kilograms of fuel (roughly half its 4,150-kilogram capacity) and three crewmembers brought the takeoff mass to 13,517 kilograms, which was well below the maximum allowable gross weight of 15,600 kilograms. The Cormorant that Skies flew with RCAF's 442 Squadron, although fully equipped for SAR with a standard fuel load of 2,400 kilograms and a crew of six, had a gross takeoff mass of 13,800 kilograms, which was below the maximum allowable gross weight of 14,600 kilograms. Direct comparison is difficult to establish, but the Norwegian machine is both heavier with installed systems and has more installed power than the CH-149, so the net result may be expected to be about the same operational power margin. Rapid dispatch can be facilitated by starting the auxiliary power unit (APU) while strapping in. Grant talked me through the engine starting procedure from memory. Air Force crews will use a checklist, but the procedure was quick and straightforward Engine controls consisted of three rotary knobs on the overhead panel in place of engine condition levers. I monitored the start, but Grant advised that in the event of a start-up malfunction the FADEC would shut down the engine faster than the pilots could react. We started the No. 1 engine first to power the accessory drive, providing hydraulic and electric power and bleed air. Starts of engines No. 2 and No. 3 were done simultaneously. Pre-flight checks and initialization of the aircraft management system (AMS, but think “master computer”) took Grant only minutes. Despite the functional similarity of the cockpit to the CH-149, the impression that I was amidst unfamiliar new technology was immediate. As ground crews pulled the chocks and busied themselves around the helicopter, the onboard Obstacle Proximity LIDAR System (OPLS, where LIDAR is light detection and ranging, since I needed to ask, too) annunciated their presence around the turning rotors. This system, which Grant described as being like the parking sensors in a car, provided a pop-up display and discretely-pitched audio cues depicting the range and azimuth to obstacles around the helicopter. Having come from a generation where we squinted into a landing light beam to guesstimate rotor clearance from obstacles, all I can say is, I want one! Full article: https://www.skiesmag.com/features/an-investment-in-capability