News

(B2 – En mer de Norvège) Alors qu'il naviguait entre l'Islande et la Norvège, nous avons pu embarquer quelques heures à bord du Nato Research Vessel (NRV) Alliance. Ce navire original, qui embarque des spécialistes de différents pays de l'Otan, teste des drones sous-marins dans les eaux glacés de l'Arctique. « Nous amenons la science à la mer », résume le docteur Catherine Warner, l'Américaine qui dirige le Centre de recherche et d'expérimentation maritime (CMRE) dont dépend le bateau. Bardé d'antennes, de sonars et de machines expérimentales, ce b'timent fait la fierté de l'Otan. Les officiels en visite à bord y voient une preuve de la capacité des Alliés à développer de nouvelles solutions pour répondre aux besoins des militaires. Les drones sous-marins ou gliders Si le NRV Alliance est susceptible de travailler sur tous les domaines identifiés comme prioritaires par les marines de l'Otan (lutte anti-sous-marines, lutte-anti-mines, renseignement...), ses travaux sont actuellement concentrés sur les drones sous-marins, appelés gliders en anglais. Des engins qui pourraient révolutionner de nombreuses missions. NB : Le NRV Alliance et ses drones participent régulièrement à des manoeuvres de l'Otan, comme l'exercice de renseignement interalliés Unified Vision 2018. Lire ici. Plus endurants que les hommes ? Ces drones séduisent au sein de l'Otan. C'est un haut gradé, riche d'une expérience dans le renseignement militaire maritime, qui en résume tout l'attrait : « Un équipage humain a besoin de retourner au port pour dormir, manger et voir sa famille. Ces robots peuvent rester des mois en mer. » Peu coûteux, discrets, polyvalents, endurants et autonomes, ces engins sont au cœur des expérimentations menées par les 25 scientifiques à bord. Ceux qu'ils utilisent actuellement, des Slocum G3 de l'Américain Teledyne, cartographient les fonds marins et font des relevés de températures et de courants. Des informations cruciales pour repérer et surveiller les mouvements de sous-marins, par exemple. Multiusages Le potentiel des gliders intéresse dans des domaines divers. Ces engins ont été testés dans la lutte anti-mines, avec des robots capables de patrouiller, de reconnaître des menaces et de les signaler à l'homme qui pourra ensuite intervenir. Un moyen intéressant de palier à une flotte européenne de navires de lutte anti-mines de plus en plus vieillissante et coûteuse à remplacer. Dans un autre registre, des drones pourraient mailler les fonds de certains points stratégiques pour surveiller les mouvements de sous-marins adverses. D'ici quelques années, si des puissances étaient capables de bloquer ainsi certains axes clefs, la dissuasion nucléaire pourrait se voir impactée et devrait se réinventer dans sa composante navale. C'est l'un des intérêts du grand Nord, où transitent régulièrement des sous-marins nucléaires. De l'aveu d'un haut gradé de l'Otan, spécialiste en matière de renseignement, ces drones sous-marins sont à l'heure actuelle presque indétectables. Les sous-marins remis en cause L'arrivée de ces submersibles risque de remettre en question tout le fonctionnement sous-marin. D'autant plus qu'ils sont très majoritairement automatisés : vu la difficulté pour assurer les communications sous l'eau, il n'est pas possible de les piloter en permanence. L'homme se contente donc en réalité de suivre les mouvements sur des écrans, ne donnant que quelques ajustements pour les remontées régulières en surface. Une évolution stratégique qui rappelle au docteur Catherine Warner un autre grand changement au sein de l'US Air Force, où elle s'occupait de plusieurs programmes de drones : « Les sous-mariniers sont pour l'instant sceptiques. Comme pour les pilotes de l'US Air Force lorsque les Predator sont arrivés à l'époque. Mais aujourd'hui, ils ont pleinement intégré l'intérêt de ces drones et ils ont accepté de travailler dessus. » Un navire presque unique Conçu sur mesure Le NVR Alliance est un navire conçu sur mesure pour les besoins de l'Otan, dans les ateliers de l'Italien Fincantieri. Livré en 1988, il embarque une multitude d'équipements de recherche qui en font un laboratoire en pointe dans le domaine des études maritimes. Il dispose des dernières technologies dans les domaines océanographique, acoustique, météorologique ainsi que de son propre atelier pour réparer ou modifier le matériel. « La force de ce navire, explique un scientifique à bord, c'est qu'il permet d'aller tester des idées dehors, en conditions réelles. » Le b'timent peut de fait aller naviguer dans les eaux polaires. Le tout avec des conditions de vie à bord qui restent très confortables : la quasi-totalité des chercheurs dispose de cabines individuelles ! L'Alliance au sein de l'Otan Le NRV Alliance est, avec le CRB Leonardo, l'un des deux navires détenus en propre par l'Otan. Rattaché au Centre de recherche et d'expérimentation maritime (CMRE) de La Spezia (Italie), il est chargé de tester des technologies au profit des Alliés. Le b'timent a longtemps été opéré par des marins allemands, jusqu'en 2015. Pour simplifier la logistique dans son port d'attache, il a été transféré aux mains de la marine italienne qui a rapidement séduit les scientifiques à bord avec sa botte secrète : la pizza en guise de casse-croûte nocturne ! Des pionniers pas toujours suivis Les équipes du NVR Alliance travaillent en collaboration avec des industriels et des universités. Ils développent souvent leurs propres solutions aux problématiques identifiées. Ils ont par exemple acheté un drone Bluefin au Français Thales, dans lequel ils ont intégré leurs propres équipements. Le fabricant a pu bénéficier des retours et progresse ainsi dans son développement, gr'ce aux essais de l'Otan. Côté autorité publique, l'enthousiasme n'est pas toujours aussi présent. De l'aveu du docteur Catherine Warner, les découvertes à bord ne sont pas toujours suivies par les États commanditaires qui hésitent à poursuivre les investissements. https://www.bruxelles2.eu/2018/07/03/lalliance-navire-de-recherche-de-lotan-teste-des-drones-sous-marins-dans-le-grand-nord/

BY: CRAIG HOYLE General Atomics Aeronautical Systems' MQ-9B SkyGuardian medium-altitude, long-endurance remotely-piloted air system (RPAS) will make it first transatlantic journey early next month, before appearing at the UK's Royal International Air Tattoo. The aircraft – which forms the basis for the UK Royal Air Force's future Protector RPAS – is scheduled to land at RAF Fairford in Gloucestershire on the evening of 11 July, and is due to appear in the static display at the 13-15 July RIAT event. Expected to last more than 20h, the non-stop sortie will commence from General Atomics' flight-test and training centre in Grand Forks, North Dakota. On 25 June, the UK Civil Aviation Authority detailed a series of planned airspace restrictions that will be made in support of the SkyGuardian's arrival. These will be activated "for the safety of the remotely-piloted aircraft and other airspace users", it says. "Temporary danger areas will be activated by NOTAM with potentially less than 24 hours' notice," the CAA says. "Each danger area will be managed by an air traffic control unit." During flight testing, the SkyGuardian has demonstrated its ability to remain airborne for more than 48h. "The civilian aircraft, which is certificated and registered through the US Federal Aviation Administration, has been issued permission to operate within UK airspace," the CAA says. RAF operations with at least 20 Protector RG1s are due to commence during the 2020s, with the type – to be certificated for use in non-segregated airspace – to replace the service's current armed Reapers. https://www.flightglobal.com/news/articles/unmanned-skyguardian-to-cross-atlantic-for-riat-debu-449768/

By: Jen Judson WASHINGTON — The U.S. Army's interim short-range air defense system, which will urgently fill a capability gap identified a few years ago in the European theater, has crystallized. The Army had already decided the Interim Maneuver-Short-Range Air Defense system would be developed around its Stryker combat vehicle, but it has now chosen Leonardo DRS to supply a mission equipment package that will include Raytheon's Stinger vehicle missile launcher, according to Col. Chuck Worshim, program manager for cruise missile defense systems with the Army's Program Executive Office Missiles and Space, who spoke to Defense News on June 28. General Dynamics Land Systems — which produces the Stryker — will be the platform integrator for the IM-SHORAD system, he added. The Army went through a selection process through the Department of Defense Ordnance Technology Consortium to determine the best collection of vendors to build prototypes. A Boeing-GDLS team was a front-runner for an interim SHORAD mission package, unveiling before any other vendor a solution in August 2017 at the Space and Missile Defense Symposium in Huntsville, Alabama. Using an Avenger system on top of the Stryker, which was the team's solution, sought to take what was already in the Army's inventory to create a system. And a SHORAD demonstration at White Sands Missile Range, New Mexico, last September saw more possibilities for the interim solution including Rafael's Iron Dome and South Korean defense firm Hanwha's Flying Tiger. But a dark horse emerged at the Association of the U.S. Army's Global Force Symposium, also in Huntsville, in March. Leonardo DRS showed an unassuming small-scale mock-up of its concept at its booth at the symposium that featured its partner Moog's Reconfigurable Integrated-weapons Platform. The platform would provide a choice of sights, direct-fire weapons and missiles, Ed House, DRS Land Systems' business development manager, told Defense News at the show. The system would be able to integrate both Stinger and Longbow Hellfire missiles, requirements for the service's IM-SHORAD solution. It also would come equipped with a complement of direct-fire weapons and sights to include the M230 chain gun and the 7.62mm coaxial machine gun. But the solution also has non-kinetic defeat capabilities and Rada's onboard multimission hemispheric radar. And that dark horse has won the opportunity to provide the mission equipment package for the IM-SHORAD prototype program. The system will also have Hellfire rails as well as an onboard sensor, according to Worshim. The Army decided to choose DRS to provide the mission equipment package because of the flexibility of its reconfigurable turret, which allows for growth opportunities should the threat change or something else change that requires a new interceptor or another capability, Worshim said. The solution also posed less intrusion to the existing Stryker platform, he added, and provided an increased level of protection as the crew reloads ammunition, which can be done under armor. While the Avenger solution was deemed technically acceptable and met requirements, one of the reasons the Army decided against using the Avenger on Stryker as the solution was because the government felt it would require major modifications to the Stryker, according to Worshim. The Army has a desire to keep the Stryker as common across the fleet as possible, Worshim said. Boeing was also looking to the government to supply Avenger turrets, of which a limited amount of those exist readily in the service's inventory, which would have been problematic when considering the Army's goal to deliver 144 IM-SHORAD systems by fiscal 2022, he explained. Now that vendors have been selected, the Army will move into a negotiation period expected to wrap up in mid- to late July. The service expects to officially award the contract to build nine prototypes by Aug. 31, but has the intention to possibly move that date up, Worshim said. Once the contracts are solidified, DRS will provide the first mission equipment package, complete with a new digital Stinger missile launcher in February 2019. Then GDLS will fully integrate the SHORAD prototype by April 2019. The final prototypes will be delivered to the service by the first quarter of fiscal 2020. As the prototypes are coming along, the Army will conduct prototype testing to see if the systems are meeting requirements. “From there, the Army will decide if this solution truly meets requirements in this respect,” Worshim said. If the solution does meet requirements, production efforts to build 144 systems — a total of four battalions — will move forward. The Army's goal is to provide the first battery no later than the fourth quarter of 2020, but that will depend on funding. If funding is lower than expected, the Army will deliver the first platoon by about that time, according to Worshim. The service has moved from receiving a directed requirement in late February 2018 to selecting vendors for the IM-SHORAD solution in just about four months, which, Worshim noted, is moving at “lightning speed” for a typical acquisition process. The hope is the process to build an IM-SHORAD solution will be used as a model for Army procurement that incorporates the “fly before you buy” concept and creates a way to rapidly understand capabilities moving forward, he said. https://www.defensenews.com/land/2018/06/28/us-armys-interim-short-range-air-defense-solution-crystallizes/

By: Mark Pomerleau Cyber has been an official domain of warfare for nearly a decade, yet the Department of Defense is still learning how to integrate it with operations. And some members of Congress are concerned the traditional military intelligence organs to this day don't understand intel support to cyber ops. The House Armed Services Committee is directing that a briefing on the subject must take place by December 1, 2018. The briefing — delivered by the under secretary of defense for intelligence, in coordination with the Defense Intelligence Agency and the military services — is expected, according to a provision in the committee's annual defense policy bill, to address multiple issues, including: Efforts to standardize a common military doctrine for intelligence preparation of the battlefield for cyber operations; Efforts to develop all-source intelligence analysts with the capability to support cyber operations; and Efforts to resource intelligence analysis support elements at U.S. Cyber Command and the service cyber components. “The committee is concerned about the Defense Intelligence Enterprise's ability to provide the cyber community with all-source intelligence support, consistent with the support provided to operations in other domains,” the provision, called an “item of special interest,” says. In some cases, other intelligence disciplines, such as human intelligence or signals intelligence, might be needed to help enable a cyber operation. A committee aide noted that the goal is to get DoD to think about cyber operations just as operations in any domain and build the infrastructure to support that. According to Gus Hunt, Accenture Federal Services cyber strategy lead, cyber as a domain is really no different than the others from an intelligence support perspective. The objective of intelligence, he told Fifth Domain in a recent interview, is to ensure it provides timely information about the adversary, who they are, the status of their capabilities and any information about the threats that are there. “I think what you're seeing ... is that people are asking the question are we appropriately structured or resourced and focused to be as effective as we possibly can in this new realm of cyber and cyber operations,” Hunt, who previously served as the chief technology officer at the CIA, said. “Because they're asking the question, I think the obvious answer is ... we're not structured as effectively as we possibly can be ... [but] it's really good that people are sitting there asking.” The Army is experiencing similar problems, especially when it comes to experimenting with force structure changes and bringing cyber effects to the tactical edge, which currently don't exist. “We're not seeing a corresponding growth in the intel organizational structure with the cyber and” electronic warfare, Lt. Col. Chris Walls, deputy division chief for strategy and policy in the cyber directorate of the Department of the Army G-3/5/7, said at the C4ISRNET conference in May. “The existing intel force structure is really going to be stressed when we put this EW and cyber capability into the field unless they have a corresponding growth and capability as well,” Walls said of tactical cyber effects and teams. https://www.fifthdomain.com/congress/2018/07/02/does-dod-know-how-to-supply-intel-for-cyber-ops/

By: Joe Gould WASHINGTON ― America's aging C-135 reconnaissance planes keep breaking down, and alarmed lawmakers want the U.S. Air Force to tell them why. Based at Offutt Air Force Base, Nebraska, the 55th Wing's Boeing-made reconnaissance and intelligence-gathering aircraft, all more than 50 years old, are meant to carry out critical missions from operating bases in England, Greece, Japan and Qatar. But an Omaha World-Herald investigative series has found that mechanical problems plague the jets, cutting short 500 of their flights since 2016 and one of every 12 missions since 2015. That's prompted Nebraska lawmakers to write to Air Force Secretary Heather Wilson, urging her to probe and report on the health of the 55th Wing's worn-out fleet. Meanwhile, the Nebraska delegation is trying to fend off an effort within Congress to strip funding to recapitalize the OC-135, which conducts overflights of Russia under the 34-nation Open Skies Treaty. Some lawmakers and Pentagon officials have grown skeptical of the treaty, which allows reciprocal surveillance flights, amid alleged Russian violations, but the administration has requested funds for two new airliners to take over the mission. “It has one of the worst maintenance rates in the United States Air Force,” Rep. Don Bacon, R-Neb., said of the OC-135 on the House floor last week. “It frequently breaks down in Russia, putting us in very hostile, awkward situations with Russians at their bases.” The chair of the Senate Armed Services Committee's Strategic Forces Subcommittee, Deb Fischer, led the letter with Sen. Ben Sasse, a SASC member; Bacon (a retired brigadier general and former 55th Wing commander who sits on the House Armed Services Committee), as well as Reps. Jeff Fortenberry and Adrian Smith. The letter asked Wilson to report on the 55th Wing's safety, security and continued mission effectiveness as well as the Air Force's long-term plans to sustain and recapitalize the wing's capabilities. It referenced the RC-135V/W Rivet Joint, RC-135S Cobra Ball, RC-135U Combat Sent, WC-135 Constant Phoenix, TC-135 Rivet Joint Trainer and the OC-135 Open Skies aircraft. In the current budget season, House and Senate lawmakers have taken divergent approaches to the Trump administration's $222 million request for the two new aircraft. House appropriators and authorizers stripped the funding from their 2019 bills. The authorization bill withholds the funding until Russia adheres to the treaty and agrees to extradite Russians indicted for meddling in U.S. elections in 2016. Fischer helped ensure the Senate-passed 2019 authorization bill did include funding for OC-135 recapitalization, and the bill will have to be reconciled with its House counterpart. Defense Secretary Jim Mattis directed the Air Force to recapitalize the aircraft. He wrote to Fischer in May to acknowledge that unplanned maintenance issues meant the U.S. completed only 64 percent of its scheduled overflights in 2017, while Russia typically completes all of its scheduled overflights. The White House Office of Management and Budget has also issued letters objecting to the absence of OC-135 recapitalization funding in the House bills. https://www.defensenews.com/congress/2018/07/02/us-spy-planes-are-breaking-down-and-lawmakers-want-answers/

By: Megan Eckstein A $50,000 investment in laser scanning equipment saved the Navy nearly $2 million during the planning effort for USS George Washington‘s (CVN-73) refueling and complex overhaul. A small team of engineers with a LIDAR system did the work of the usual 20-person team, inspecting the nooks and crannies of the carrier to inform the overhaul plans. Now the Navy is looking to leverage that win and expand its use of laser scanners to not only cut down costs for aircraft carrier maintenance planning and execution but also tie into virtual reality trainers and other cutting-edge technologies. In the case of the George Washington RCOH, a team of two or three engineers from Newport News Shipbuilding flew out to the forward-deployed carrier in Japan with a LIDAR scanner atop a tripod. As the tool slowly spins around it gathers millions of data points depicting how far away objects are from the scanner. The resulting 3D point cloud shows the precise location of items in the room – not where a server rack was supposed to be according to the blueprints, for example, but where it actually is. Capt. John Markowicz, the in-service carrier program manager, told USNI News in an interview that the $1.8-million savings from that one ship check effort was about 15 percent of the total cost of that portion of the RCOH planning, and that his office was already employing the laser scanning technology ahead of the next RCOH for USS John C. Stennis (CVN-74). He said it was too early to guess a percent savings the laser scanning will yield this time around, but that it would likely be on par or better than with George Washingtonbecause Newport News Shipbuilding has continued to invest in the laser scanners and learning how to best leverage them. Markowicz said the tripod-mounted scanners cost about $3,600 each, and smaller handheld ones for scanning small spaces cost about $600. The actual scanning service can cost between $50 and $250 an hour, and post-production work can cost $100 to $300 and hour. USNI News visited Newport News Shipbuilding last October, and during a lunchtime meeting a company engineer scanned the whole conference room and produced a point cloud model of the room within about 30 minutes, as an example of how quickly the scanners can work. Once those point cloud models are created, the Navy and Newport News have already found several uses during the RCOH and other carrier maintenance planning and execution phases. First, for the actual planning, the point cloud models can offer some spatial perspective that flat blueprints can't, as well as an updated “as-is” assessment of the space instead of the “as-designed” view the blueprints contain. Mark Bilinski, a scientist at the Space and Naval Warfare Systems Center Pacific and its Battlespace Exploitation of Mixed Reality (BEMR) Lab, and his team are working on laser scanning technology and ways to leverage the 3D point cloud product. He showed off some of the technologies to USNI News during the U.S. Naval Institute and AFCEA's WEST 2018 conference in San Diego in February. During a panel presentation at WEST, he said that sometimes the 3D scans just show discrepancies between where an item was supposed to be installed versus where it actually was installed. However, he ran into a case where the blueprints depicted an escape hatch of a certain size, but it was larger in reality; in that case, a planner might have thought there was room to install something nearby, when in reality putting the equipment there would actually partially block the hatch and cause a safety issue. In another case, the blueprints showed a hatch as being much larger than it actually is, and so the planner might have thought the space was unusable. “That's an opportunity cost because that might be some space that you could use for an install that you don't think is available to you,” Bilinski said. Once the planning is done and execution is set to begin, Markowicz said the 3D models, unlike 2D blueprints, can help identify interferences and obstructions, help find the best route down narrow passageways for bringing in bulky equipment to install, aid in laying in pipes and wires and more. “That is valuable, it cuts down time in the shipyard,” which ultimately cuts down cost and allows the next carrier to come in for maintenance quicker. Norfolk Naval Shipyard and Puget Sound Naval Shipyard and Intermediate Maintenance Facility are beginning to embrace this technology, which could spread to the other two public shipyards to support submarine maintenance activities too, and Newport News Shipbuilding is “all in” on the private sector side, he said. Markowicz noted that taking the scans and making mockups in a 3D digital environment can not only save time on major efforts like finding the best routing for piping, but can also help with little things – for instance, there was a case of trying to install a laptop in a phone booth area, but it turned out that the laptop couldn't open all the way without hitting the phone. “We stumble upon these things sometimes a little late in the design process, or actually the install process. It's not as efficient as it can be,” he said. Every time a maintenance or modernization activity takes place, the scan would become slightly outdated, but Markowicz said the idea would be to rescan periodically and maintain records of all the scans as “selected records” that accompany the 2D drawings for the Nimitz class today. “Once we have this digitally, I think that's pretty useful. We can share it with multiple activities and have the documentation for future use and future availability planning,” he said. Bilinski also noted the ways laser scans could help during a major maintenance period, when multiple program offices are trying to get their own equipment in and don't always have a great way to coordinate. In many availabilities, Bilinski said, someone goes to install a piece of equipment in a space, only to find that that space is taken. Instead, he will just take the next closest space that meets his need. Then the next person comes in to use that space and finds that it was just taken, causing a cascading effect. If everyone involved in the maintenance period were working off a shared digital plan that could be updated in real time as systems were installed, conflicts could be identified sooner and plans could be rearranged as needed without any on-ship confusion. “If you have that collaborative environment where everyone is planning off of the scan data, the installer can see not only that this space is physically available, but hey, it's also available in the planning environment; no one is planning to put anything there. Or, maybe someone is planning to put something there but you've got to put your equipment somewhere, so you put it there, but you at least know who to notify so that we can start fixing this problem earlier than discovering it when the next program office shows up to install their equipment,” he said. Virtual reality application Virtual and augmented reality tools are already changing how ships are built, with Newport News Shipbuilding telling USNI News during the October visit that the use of VR goggles while laying pipes and cables for the future John F. Kennedy (CVN-79) has cut the required man-hours in half. Newport News is also sending its shipbuilders out with tablets that can use VR to show what's on the other side of a wall or where to cut a hole into a wall, and can also include how-to videos to show step-by-step how to do the day's tasks. Markowicz said there would likely be less applicability for that technology on the ship repair and maintenance side compared to the ship construction side, but he hopes to explore how the public shipyards can use VR and tablets to drive efficiency up and cost down. Where VR and laser scanning could converge, though, is on training. Because each ship has a different set of navigation and steering systems, surface search radars and other systems, allowing a sailor to train on his or her own ship is more useful than training on a generic ship. Markowicz said his office is working with Bilinski's BEMR Lab to create ship-specific VR training tools for while ships are in maintenance. They scanned destroyer USS John S. McCain (DDG-56) after its collision last year, and while the ship undergoes a lengthy repair process, sailors could use VR goggles to practice maintenance and repair work on McCain's specific configuration without having to actually be on the destroyer. The BEMR lab already has Virtual Eqiupment Environment (V2E) tools that let the user walk into a room, spot a server rack, for example, and begin to take apart and put back together the server rack. Similarly, when a carrier is in RCOH for four years, sailors are often times flown around the world to get training time on other carriers. Though the ship is safe for them to be in while in RCOH, the systems are all ripped out. If the Navy had scans of the last carrier that came out of RCOH and could insert a finished product view into VR goggles, sailors could train on their own ship at Newport News while the RCOH goes on around them. “We've got to find creative ways to do training. Normally they leave ... and they go out to the fleet and ride another ship and get their training that way. But a lieutenant had the idea of, okay, you can go up to pri-fly (primary flight control), any everything's ripped apart but you can put on these goggles and see what your space is going to look like 48 months from now ... and visualize it all and stand there in your space without having to go to another ship,” Markowicz said. “I definitely see a partnership with the BEMR Lab and laying that out for training for ship's force, closing that gap in readiness. Because I was part of the Carl Vinson (CVN-70) overhaul, and our skills atrophied as we stayed in overhaul for that length of time. So we have to find opportunities to sharpen our skills.” Bilinski said there could be other uses for combining a current ship scan and VR goggles or tablets. For example, if scans of ship spaces were taken correctly, they could be woven together to create essentially a Google Maps of sorts. New sailors could use it to learn their way around the ship. Or, more importantly, “let's say a fire breaks out on a ship and you need to go into a compartment and fight that fire – it's going to be smoke-filled, it can be dark, you may not have ever been in that space, there could be plenty of places where you can fall, you could twist your ankle, you could bump into equipment in the space. If you were to understand where you were, you could look through that wall and see what the last as-is condition of the ship was and sort of get an idea of what you're getting into before you go into that space,” then firefighting or other emergency response efforts could be done potentially more safely and quickly. Policy and technical barriers Much like other emerging technologies, Markowicz said those trying to implement laser scanning are facing the usual set of challenges: how does the Navy balance the need to ensure technical rigor while also not being too proscriptive and excluding potential scanners or data formats that could be useful? What legal and ethical concerns need to be addressed through policy changes? “That's the rub right now,” Markowicz said. “You see us working with Newport News. I'm sure there's other pockets within NAVSEA that are working on it. But alignment across the whole NAVSEA equities hasn't happened yet. So where we are successful at NAVSEA (Naval Sea Systems Command) is where we have a singular tech warrant holder who owns turbines or fire protection or what have you. So we're really successful in employing that model across NAVSEA. I see a vision someday where you have a tech warrant holder for a laser scanner that's able to establish standards, policy, requirements to go forward and articulate that to industry.” His team is hosting a laser scanning summit later this month to identify barriers and develop courses of action to begin to address them – everything from how many dots per inch are needed for the scan to be useful, to, are there any engineering decisions that cannot or should not be made based on laser scanning and 3D point cloud modeling work. Markowicz suggested that anything related to the nuclear propulsion system is going to require much more technical rigor than other parts of the ship, but he said he still sees great potential for savings with laser scanners beyond what the Navy and Newport News Shipbuilding are doing today. “I think across the board we will save money, and in that way the leadership is behind it if it helps us be more efficient,” he said. Back when the Navy and Newport News first did the George Washington ship check, then-Navy acquisition chief Sean Stackley's message to Markowicz was, “I absolutely needed to make it my mission to leverage new technologies and be more efficient in the repair business,” the captain said, and he believes this is a prime example of how to do that. To be successful enterprise-wide, he said, “I think the real key is setting the standards, which will provide a framework where contractors and Navy can plug into. To get there, we need to provide technical leadership, host conferences ... flush out all the issues. At least create a standard so that we can contract and have deliverables. One software package or one laser scanner, I don't think we need to be that proscriptive. I think we set a standard for industry, like an ISO standard, and people will come around to it.” He likened the point cloud image to a PDF that could be opened on a Mac or a PC and is readily sharable among users, and said it would be important that, regardless of what scanner is used, the output has these qualities too. He suggested that some scans would need to be precise while others could forsake precision for speed if the user just needed a general idea of how a room is laid out, and all those types of issues would eventually become written out and standardized. https://news.usni.org/2018/07/02/navy-use-of-laser-scanning-already-showing-big-savings-summit-this-month-to-refine-plans

By: Mike Yeo MELBOURNE, Australia ― Singapore will decide in the next few months on a new fighter to replace its fleet of Lockheed Martin F-16 multirole fighters, with the F-35 Lightning II Joint Strike Fighter from the same manufacturer seen as the prime candidate. In an interview with media ahead of the southeast Asian island nation's Armed Forces Day, Defence Minister Ng Eng Hen said that despite ongoing upgrades, the F-16s face obsolescence beyond 2030. He added the country will make a definitive decision on its replacement in the next few months based on interoperability with Singapore's current systems and platforms as well as the price. Ng refused to be drawn into further details as to which fighter platforms Singapore is looking at, only saying that the BAE Systems Typhoon, the F-35, Russia's Sukhois, and Chinese-made stealth fighters are “the usual suspects that you have to look at” when air forces are choosing a new combat platform. However, Singapore has been evaluating the F-35 since 2013 and Ng had previously suggested that the type was suited to be the replacement for Singapore's F-16s. Earlier reports suggested Singapore is keen on acquiring the F-35B short-takeoff-and-vertical-landing variant, with the B-model's STOVL capability seen as useful for Singapore, whose main island has an area of a mere 277 square miles and whose air bases are seen as vulnerable to a first strike. Nevertheless, former head of the F-35 program Christopher Bogdan, said Singapore requested information on all three variants of the F-35, and the possibility of Singapore opting for the conventional takeoff and landing F-35A variant cannot be ruled out. Singapore is a security cooperative participant of the F-35 program and is believed to have an eventual requirement of between 40 and 60 new fighters to replace its F-16s. The Republic of Singapore Air Force, or RSAF, currently operates a fleet of 60 F-16C/D Block 52 and Advanced Block 52 aircraft delivered between 1998 and 2005. Twelve aircraft are currently assigned to a joint continuation training unit between the U.S. and Singapore air forces at Luke Air Force Base, Arizona, while the remaining are split between three Singapore-based squadrons. Singapore's F-16s are currently being upgraded by Lockheed Martin with the upgrade program, which started in 2016 and is expected to be completed in 2022, including the addition of Northrop Grumman's AN/APG-83 active electronically scanned array radar, an improved identification, friend or foe system, as well as Link 16 data links. During the interview, Ng also outlined some of the other upcoming procurement programs Singapore is looking at. These include new multirole combat vessels to replace six corvettes and new joint multimission ships to replace four amphibious ships in Singapore's Navy, while the Army will replace its towed 155mm howitzers with a new self-propelled high-mobility artillery system in the 2020s. https://www.defensenews.com/air/2018/07/02/will-the-f-35-beat-out-the-usual-suspects-in-singapores-search-for-f-16-replacement/

By: Maddy Longwell A research and development collaboration management company has been awarded a contract to helm a technology prototype consortium as part of a new acquisition process employed by the Space and Naval Warfare Systems Center Atlantic, in Charleston, South Carolina. SPAWAR awarded an other transaction authority to Advanced Technology International, of Summerville, South Carolina, for consortium management for SPAWAR's Information Warfare Research Project (IWRP). Under the contract, Advanced Technology International will manage a group of defense contractors who will complete projects for the government that address SPAWAR technology needs, and the consortium will facilitate competition for projects. Topics will be open to competition beginning in August 2018, the SPAWAR Systems Center Atlantic said. The contract is worth $100 million over three years. IWRP OTA is an acquisition tool that allows nontraditional industry partners to work with organizations across SPAWAR to prototype technology that supports naval information warfare capabilities. IWRP focuses on information technology areas such as cyberwarfare, cloud computing and data science. SPAWAR announced OTAs as an acquisition tool through the IWRP at an industry day in February 2018, where prospective offerors learned about OTA strategy and the technical scope of IWRP OTA projects. “The IWRP will allow us to take advantage of commercially developed capabilities that are keeping pace with emerging technologies; technologies and innovation that we cannot take advantage of in a [Federal Acquisition Regulation]-based contract environment,” said Chris Miller, executive director of SPAWAR Systems Center Atlantic. OTAs, which are not covered by the FAR, are a more flexible acquisition tool used by the Department of Defense. OTAs provide for the production of prototype systems. OTA contracts are mostly awarded to nontraditional defense contractors. OTA contracts enable departments under the Department of Defense to access commercial technologies that support the overall goal of IWRP, said SSC Atlantic Deputy Executive Director Bill Deligne, in a news release. “This mechanism is faster and more attuned to getting something quickly that we want today, as opposed to traditional federal acquisition,” Deligne said. https://www.c4isrnet.com/home/2018/07/02/the-navys-new-acquisition-tool-speeds-up-tech-prototyping/

By: Pierre Tran Communications & Systèmes, a specialist in mission critical systems, launched July 2 a capital increase to raise €10.2 million (U.S. $11.9 million) and finance an announced expansion in European defense and security. The rights issue is intended to raise finance for a mergers and acquisition plan, dubbed Plan Ambition 2021, and follows the approval June 26 by a CS shareholders meeting for the acquisition of Novidy's, a cybersecurity company. “I am rather delighted. This is a step forward,” CS CEO Eric Blanc-Garin told Fifth Domain July 2. “The capital increase will enlarge the shareholder base, bring in more institutional investors and improve the stock liquidity.” The main aim is to fund the company's expansion by mergers and acquisition. “We have targets; we are in active discussion,” he said, when asked if CS has a list of companies in its M&A plan. An issue of new stock is intended to raise €10.2 million, which could rise to €11.5 million if the offer meets demand from the stock market. The new stock will be priced at €5.90 per share, a 22.2 percent discount on the closing price June 28. Current shareholders are offered two new shares for every 25 shares held. A core shareholder, Sopra Steria Group, has committed to subscribe to the stock issue. Sopra Steria holds 10.36 percent of CS and has pledged to inject €1.1 million into the company by exercising its preferential rights. “This capital increase will allow CS to have the means necessary to realize other operations of external growth with priority in Europe in the growth sectors of defense and civil security, space and cybersecurity,” the company said in a statement. Current shareholders will have a preferential right for subscribing to the stock issue. The shareholders meeting approved the capital increase, which had been announced as a second step in the Plan Ambition 2010 and follows the agreed offer for Novidy's. The acquisition of Novidy's boosts CS's annual sales in cybersecurity to €40 million, with the sector accounting for 20 percent of the company's total revenue, the company said in a June 26 statement. “We are delighted that our shareholders have unanimously approved this acquisition, which allows CS to mark a new stage in its development,” Blanc-Garin said in the statement. “This is the first significant step in our strategic plan, Ambition 2021.” https://www.fifthdomain.com/industry/2018/07/02/french-firm-makes-moves-to-fund-cybersecurity-expansion/